My 99 randomly threw an abs light when I changed my oil and now it won’t start, cranks but no spark. I know I had some abs codes for a few days prior to changing the oil, I only removed the spark plug wires from the head to cycle the oil pump. it was driving fine for the 2 days after scanning before the abs light was on. Gonna scan it again and see what new codes I may have and do what you video shows. My transmission speed sensor also makes the Speedo go crazy if I move the connector
I had abs light on on my 98 crv Had codes. 11, 18, 54, 61 I think 54 or 61 the low voltage code and relay power off code i believe And i seen a video and the guy said low voltage codes are usually a bad connection at the battery. From the abs fuze box close by, its the white wire to the battery terminal. So i took it off and sanded it all down. Put the little 10mm nut back on. Then Reset abs codes like at the end of this video And now i only have a code 11 So if you have a low voltage codes Clean the connection at the battery from the abs fuse box. Reset the codes and it should turn the abs light off. Or some codes off anyway
Did you watch the video? @1:45, service connector. You can also Google Honda CRV service connector. You ask for more detail, but your question itself is vague. 😅
My 99 randomly threw an abs light when I changed my oil and now it won’t start, cranks but no spark. I know I had some abs codes for a few days prior to changing the oil, I only removed the spark plug wires from the head to cycle the oil pump. it was driving fine for the 2 days after scanning before the abs light was on. Gonna scan it again and see what new codes I may have and do what you video shows. My transmission speed sensor also makes the Speedo go crazy if I move the connector
98 prelude abs lite on will try your technigue. Thanks will let you know how it turned out
Very cool vid and well filmed. I now know exactly what to do. Thanx
My 2002 CR-V has just failed it's MOT (road safety test in UK) on the ABS light, so I'll be doing this in the next few days. Thanks.
Jim Cook damn here in New York ABS doesn’t mean shit that sucks man
😮thank you
You're awesome!
Thank you,
Mike
Honda gotta love Morse code
When you have the key on and the driver door open on a honda. The same beeping you hear in every one is morris code for H apparently
I had abs light on on my 98 crv
Had codes. 11, 18, 54, 61
I think 54 or 61 the low voltage code and relay power off code i believe
And i seen a video and the guy said low voltage codes are usually a bad connection at the battery. From the abs fuze box close by, its the white wire to the battery terminal.
So i took it off and sanded it all down. Put the little 10mm nut back on.
Then Reset abs codes like at the end of this video
And now i only have a code 11
So if you have a low voltage codes
Clean the connection at the battery from the abs fuse box. Reset the codes and it should turn the abs light off. Or some codes off anyway
Sure would like more detail on the plug he jumped.
Did you watch the video? @1:45, service connector. You can also Google Honda CRV service connector. You ask for more detail, but your question itself is vague. 😅
My crv shows the abs light only in rainy days
Super super helpful video! Well explained!
Awesome vid
I heard cory Lynn got the b20s?
TheK20head all day.....every day :D
was that connector you jumped over the ABS module or over on the drivers side?
how many ABS sensors do these crvs have?
Thank you :) this helps a lot, I'm working on this now :)
Kim Ulvberget Youre welcome, thanks for watching!
Subscribed today!
nice
Shouting you out in my video
I appreciate the views and love, thank you! congrats on the CRV!
what told you you it was a code 11 or 12?
Did you not watch the video?? If you watch you can see me do it. The light blinks. Long and Short. You count
Long blinks count as 10s short blinks count as 1s