Kalo unable to print 75, capping head naik turun terus. Sempet berhenti. Trus jalan head kanan kiri, capping head tidak turun lalu error.kenapa ya mas?
the error lies in the Purge cam switch or it could be on the printhead board sensor module for further information you can see the following link www.acehcom.co/search/label/BROTHER
I have a Brother MFC 6510 DW HUGE> Cannot init.50. Have checked over 10 times for paper or paper clip, etc. nothing. The print head stays on the right and when it tries to print does not come out and makes grinding noise. I have experimented with many things. If I unplug and let it start up to normal...the print head does move to the middle. When I shut the cover and print...it goes tot the right stays there and a grinding sound again. I have opened all 4 colour cartridges, reinstalled and told it NO I did not change them. Try to print...print head on the right, stuck, grinding. Music is horrible. Too loud and distracting. Do you have an English version?
Hi buddy this is the problem with the purge cam switch sensor, you have to clean it and make sure the encoder strip tape for the Print Head nets are clean. for this problem you can check on my blog in the Indonesian version but you can later translate to English to make it easier because there I complete with pictures. this is the blog link: www.acehcom.co/2015/06/printer-brother-unable-to-clean-50-or.html?m=1
@@SORBANSANTRI jarang di jual terpisah om, biasanya di jual sepaket sama maintenance unit nya Om, coba cek aja part maintenance unit pasti dapat tu, dia udah sepaket sama sensor purge cam switch nya
per il nome esatto non conosco amico, ma il sensore è localizzato Spurgo cam switch o chiamato anche Manutenzione unità (Purge Cam Switch or Maintenance Unit)
Makasi bnyak gan . Sehat selalu panjang umur . Indah nya berbagi ilmu
Sip, sayang tempatnya jauh, kalau dekat mau servis ke situ, punyaku persis error begitu :)
Terima kasih
Sangat bermanfaat gan 👍👍👍
Ok om...
Sama-sama...
Terimakasih juga sudah mampir komen disini
Thanks for the tutorial ... i managed to restore my printer...😊😊
Wellcome... Bro....
Thx.bro👍
Brother j5910 cara geser head kekunci gmna om
Es un sensor o un interruptor de contacto, voy a revisar el mio. 👍
Hola Alberto, solucionaste el error de atasco de papel?? Tengo la misma impresora y me marca error 50, atasco de papel
Kalo beli sensornya namanya apa tadi?
Mau tanya om dimna ya bisa beli sensornya ?
Untuk printer tipe berapa Om? Dan sensor yang mau di beli sensor bagian mana nya?
Apakah unable to init 51 sama gan penanganannya kaya 50?
Kalo unable to print 75, capping head naik turun terus. Sempet berhenti. Trus jalan head kanan kiri, capping head tidak turun lalu error.kenapa ya mas?
Can you give link for this whole unit
i have a brother MFC-J220 the problem is unable to init 50 any solution?thanks
Nama sensor nya apa boss? Bisa beli dimana? Lagi butuh nih
Namanya Maintenance Unit.
Bisa cek di Marketplace Tokopedia, Bukalapak maupun Shopee atau di service center nya langsung
Hi, could you briefly explain what the error means?
the error lies in the Purge cam switch or it could be on the printhead board sensor module
for further information you can see the following link www.acehcom.co/search/label/BROTHER
I have a Brother MFC 6510 DW HUGE> Cannot init.50. Have checked over 10 times for paper or paper clip, etc. nothing. The print head stays on the right and when it tries to print does not come out and makes grinding noise. I have experimented with many things. If I unplug and let it start up to normal...the print head does move to the middle. When I shut the cover and print...it goes tot the right stays there and a grinding sound again. I have opened all 4 colour cartridges, reinstalled and told it NO I did not change them. Try to print...print head on the right, stuck, grinding. Music is horrible. Too loud and distracting. Do you have an English version?
Hi buddy
this is the problem with the purge cam switch sensor, you have to clean it and make sure the encoder strip tape for the Print Head nets are clean.
for this problem you can check on my blog in the Indonesian version but you can later translate to English to make it easier because there I complete with pictures.
this is the blog link: www.acehcom.co/2015/06/printer-brother-unable-to-clean-50-or.html?m=1
Penyebabnya itu karena apa ya om??
Sensor nya rusak, atau kotor
Ka aktiv lom agoe
ka mulai lom nyoe
@@acehcom8261 WA padup neuk peuget komputer bak dron
@@khairulrijalaree 081240007267
LOn WA beh
@@khairulrijalaree get
nama sensornya apa gan
Purge cam switch
@@acehcom8261 punya barangnya bang?, kok susah cari di online. barangkali ada link rekomendasi., terimakasih sebelumnya bang. banyu.adv@gmail.com
@@SORBANSANTRI jarang di jual terpisah om, biasanya di jual sepaket sama maintenance unit nya Om, coba cek aja part maintenance unit pasti dapat tu, dia udah sepaket sama sensor purge cam switch nya
Ciao come si chiama il sensore
per il nome esatto non conosco amico, ma il sensore è localizzato Spurgo cam switch o chiamato anche Manutenzione unità (Purge Cam Switch or Maintenance Unit)
Thank you bro
@@ClapRec you wellcome