Hi Gerard, you should do more examples. I bought this tool, but it's not so easy to understand how to do all the shapes and It would be good to see other videos, in wich you explane how to put the templates on the chessboard to build other difficult shape. I understood when you talk to see the template at the mirror, but it's not enough. Thank you
Thanls for your contributions to Black Magic Craft. I'm excited to watch all your videos but I would LOVE to learn from your crafts. PLEASE MAKE SOME CRAFTING TERRAIN TUTORIALS
Very nice tool and presentation of it! When Proxxon hot wire foam cutter is acquired you will have orders for your accessories from me! I'm from Norway and needed to get the information from Canada about your shop and products. Internet makes wonders!
Wow, amazing tool Gerard! I thought your multi-tool was impressive but this is something else! And thanks for doing an English version of the video, it’s very much appreciated 👍🏻
Hi Gerard, Any chance you can do a wee tiny demo of all the goodies in shapeshifter kit…there are loads of bits but the stairs, curves and bridges are the most obvious. There are a whole bunch of other goodies that I’m sure many would benefit from learning what they all do…✨👍🏻✨I’ve just assembled mine as you know…it looks lovely. Once I know what all the bits can do, my imagination can join the Elf’s 😉
so, update: I finally got it, and I must say, I'm duly impressed. I spent all of yesterday afternoon playing with it, and got a couple of really cool spires. the only "downside" is that it is indeed a complex tool that requires you to experiment a lot with it. it says so right on the instructions, specifying (rightly so) to use low quality polystirene because you are gonna burn through loads of it while getting the hang of the tool. the only critique I feel like doing so far is that there aren't instructions for the angle templates, took me a while to figure out how to use them.
Great to hear! Keep your eyes out the next couple of weeks, I've been working on a Shape Shifter tips & tricks video that might be able to help you out. Thanks for the feedback!
hugely helpful, I've been looking at a lot of your tools and couldn't figure out how they would work so didn't think to follow up further. this might change that...
Can you please tell me if the The Shape Shifter for the Proxxon hot wire Foam Cutter will fit a Hercules 8500 series hot wire Foam Cutter? Some of the available attachments are interchangeable and some of them aren’t. Any assistance would be greatly appreciated.
Thank you for the demo. I was given one as a birthday present, but there are so many templates in the set is there a list of which templates make which shapes? The bridge and the stairs are reasonably easy to guess. Also is there a list of suggested settings/co-ordinates in the peg board?
I need to s as ve up for a proxxon so can get your products. I've been on your website a dozen times. I only had enough to buy a crappy off brand awhile back. It's been getting me where i want to be but its still junk lol
Just unbelievable and how can I buy this full kit please this is just what I am looking for to keep me going and making different items like this will be another world to get my mind busy
Looks like the hot wire was scorching the hexagonal disc that the foam was attached to. There's no room for manoeuvre between the last cut of the foam and the wood that was holding it.
I'm definitely getting this now that I have disposable income. Does the shape shifter come with a set of guides, or do I have to buy the expansion set?
I think I may have to get one of those. I don't see me making one, lol. Thanks for the video. I see in just 4 videos you have more subscribers than me, that awesome!
So it's a copier add on like you have for wood lathes but only on 1 plane ( dimension ). So why not have a hexagon shaped wire ( as example ) less the bottom wire and you just push it through and in one pass then you have a hexagon. Less complicated wooden add on just wire shapes and a carriage to push the foam through the wires.
I like your video for this tool. I really like this b/c it opens up the prospects of molding. However the tracer is not as 'fine' as I'd like so it cannot read a more detailed template.
All right, shapes, shapes, shapes! Come on in shapes lovers! Here at the Shifting Lands we're slashing shapes in half! Give us an offer on our vast selection of shapes, this is a shapes blow out! All right, we got white shapes, black shapes, Spanish shapes, yellow shapes, we got hot shapes, cold shapes, we got wet shapes, we got smelly shapes, we got hairy shapes, bloody shapes, we got snappin' shapes, we got silk shapes, velvet shapes, nalga high shapes, we even got horse shapes, dog shapes, chicken shapes! Come on, you want shapes, come on in, shapeslovers! If we don't got it, you don't want it! Come on in, shapeslovers!
Hi Shiftinglands I am trying to find a way to contact you to speak with you please Looking to Purchase Yours Jigs this will suit me like Bees to Honey This is just really Amazing Videos you have made and you make a lot more Videos Greetings from the South West of Ireland V94RXH9 Teady
What Foam are you cutting? Carefull Cutting the Green Polyurethane Foam on hot wires, it is toxic! (Apologies if it is polystyrene-based foam, Just FYI)
What an elegant design! This is so well thought out and implemented. We'll done, Sir!
Hi Gerard, you should do more examples. I bought this tool, but it's not so easy to understand how to do all the shapes and It would be good to see other videos, in wich you explane how to put the templates on the chessboard to build other difficult shape. I understood when you talk to see the template at the mirror, but it's not enough. Thank you
Wow. That's a very nice accessory for the foam cutter.
Thank you for your clear demonstration. It's now on my 'to buy' tool list.
Thanls for your contributions to Black Magic Craft. I'm excited to watch all your videos but I would LOVE to learn from your crafts. PLEASE MAKE SOME CRAFTING TERRAIN TUTORIALS
I will do for sure!!!! Thanks for the reply.
Your little wheel is normally called a CAM follower in the Engineering world lol. Intriguing concept.
Very nice tool and presentation of it! When Proxxon hot wire foam cutter is acquired you will have orders for your accessories from me!
I'm from Norway and needed to get the information from Canada about your shop and products. Internet makes wonders!
Wow, amazing tool Gerard! I thought your multi-tool was impressive but this is something else! And thanks for doing an English version of the video, it’s very much appreciated 👍🏻
Thanks Nick, hope to do more video's and on a more regular basis.
Beautiful tool! Perfection!
More tutorials with the additional parts please. Confused as to how to use all of the parts. Love the results I see
Hi Gerard, Any chance you can do a wee tiny demo of all the goodies in shapeshifter kit…there are loads of bits but the stairs, curves and bridges are the most obvious. There are a whole bunch of other goodies that I’m sure many would benefit from learning what they all do…✨👍🏻✨I’ve just assembled mine as you know…it looks lovely. Once I know what all the bits can do, my imagination can join the Elf’s 😉
Amazing tool, congratulations!
Very nice. Thanks for explaining it so well. Subbed
And bought. Wonderful tool and perfect for mass production of complex terrain elements.
so, update: I finally got it, and I must say, I'm duly impressed. I spent all of yesterday afternoon playing with it, and got a couple of really cool spires. the only "downside" is that it is indeed a complex tool that requires you to experiment a lot with it. it says so right on the instructions, specifying (rightly so) to use low quality polystirene because you are gonna burn through loads of it while getting the hang of the tool.
the only critique I feel like doing so far is that there aren't instructions for the angle templates, took me a while to figure out how to use them.
Great to hear! Keep your eyes out the next couple of weeks, I've been working on a Shape Shifter tips & tricks video that might be able to help you out.
Thanks for the feedback!
Nice job !
Ich kann es nicht erwarten das neue Tool auszuprobieren !
Freue mich das du es gerne aus probieren mochtest.
Gerard Boom Du ich habe in den letzten Wochen alles von dir in meine Sammlung aufgenommen. Sie sind einfach genial
You sir are an amazing talent.
Thank you sir! I will try and keep up the good work.
I watched in amazing wonder, how something made out of MDF can produce such interesting shapes
Nice! Das steht definitiv auf meinem Einkaufszettel für die Tactica. Klasse!
Freue mich schon das du vorbei kommst
hugely helpful, I've been looking at a lot of your tools and couldn't figure out how they would work so didn't think to follow up further. this might change that...
Thanks George, Just feel free to drop me a question about any of the tools.
Video starts from 7:29 ! you're welcome
Amaising ! i will bay that shape , but from where i can bay that quality of foam ?
This is pretty cool, you need to get one of these to Black Magic Craft and see what he can do with it 😋
Fantastic work
Sehr nice! Wenn wir mal dazu kommen würden, die ganzen alten Tools zu verwenden. :) Man sieht sich auf der Tactica.
Echt perfect Gerard, werkelijk waar weer een geniale uitvinding van je!
Top! Dank je wel .
Can you please tell me if the The Shape Shifter for the Proxxon hot wire Foam Cutter will fit a Hercules 8500 series hot wire Foam Cutter? Some of the available attachments are interchangeable and some of them aren’t. Any assistance would be greatly appreciated.
Thank you for the demo. I was given one as a birthday present, but there are so many templates in the set is there a list of which templates make which shapes? The bridge and the stairs are reasonably easy to guess. Also is there a list of suggested settings/co-ordinates in the peg board?
Top, vielen Dank. Wo gibt es dieses gleiche große Tool mit den Löchern. Habe es nicht auf der Shiftinglands gefunden.????
Dónde los puedo comprar?!
Gerard ... is it true that you will hold a workshop in Vienna this year? If so ... where to sign in? 🙂
Gerard, I would love to see you make more videos for your other cutting tools that you make. I would like to see how they work.
Quassi's Bell Tower more video’s will come asap!
@@Shiftinglands how can I get your contact number please I would like to speak with you about the best kits to buy please
@@teadyconnolly9590 you can contact me through the shiftinglands website. Thanks!
Beautiful, but where We can buy that???
I need one of these for the Hotwire Foam Cutter unit I have. That's brilliant.
Thanks Donald
Incredible 🤩 I want it ... euh ... before I am going to buy a Proxxon tool 😄
Gerard I was wondering if you sell a laser cut file for the shape shifter so I could could cut my own! GB :)
Echt der Hammer... muss ich haben oO, dafür lohnt es sich schon alleine, einen Workshop zu veranstalten :D
Dann machen wir das gernme mal wieder!
can it cut EVA FOAM? if not what tabletop cutter can?
I need to s as ve up for a proxxon so can get your products. I've been on your website a dozen times. I only had enough to buy a crappy off brand awhile back. It's been getting me where i want to be but its still junk lol
fantastisch! Das tool ist ja der hammer! ich glaub das brauch ich auch
Danke! Ich arbeite fleissig weiter. Tool kommt bald auch im shop oder nachste monat auf der Tactica.
Just unbelievable and how can I buy this full kit please this is just what I am looking for to keep me going and making different items like this will be another world to get my mind busy
you can find the tool at shop.shiftinglands.com
Sir, you are a genius!
I would like to know, when are we going to be able to get styrodur foam here in the U.S. ? Why the difficulty?
That is some amazing stuff!!
Je moet ff n link naar je webshop in die video description gooien. Zo mis je traffic en mogelijk sales.
Questa base da aggiungere a proxxon..è in vendita? Dove e quanto costa?
Looks like the hot wire was scorching the hexagonal disc that the foam was attached to. There's no room for manoeuvre between the last cut of the foam and the wood that was holding it.
Hi, sorry for my bad English. If I buy the "Shape shifter" the templates for stairways an bridge was in the package? If not where buy it? Thanks
Wow Gerard that is one heck of a tool TFS. G :)
Thanks Graeme
Where could we get this? I have had a look on your Etsy page and on the website but I cannot seem to find it.
shop.shiftinglands.com
I'm definitely getting this now that I have disposable income. Does the shape shifter come with a set of guides, or do I have to buy the expansion set?
There are template with the tool, a video will come up soon with some nice tricks as well !
@@Shiftinglands awesome, thanks! I can't wait for it to arrive so I can up my fantasy spires game 👀👀👀👀👀
Is that template come with PROXXON ? Or should we purchase it from? Kindly advise
This is an add-on that you can buy in the shiftinglands shop.
I think I may have to get one of those. I don't see me making one, lol. Thanks for the video. I see in just 4 videos you have more subscribers than me, that awesome!
Are you still selling this set of tools? I can't seem to find it on your website.
here is the link: shop.shiftinglands.com/hot-wire-cutter-add-on/90-shape-shifter-for-the-proxxon-hot-wire-cutter.html
When will this be available for purchase?
I just looked at ShiftingLands.com and it is not there...
So it's a copier add on like you have for wood lathes but only on 1 plane ( dimension ). So why not have a hexagon shaped wire ( as example ) less the bottom wire and you just push it through and in one pass then you have a hexagon. Less complicated wooden add on just wire shapes and a carriage to push the foam through the wires.
wow o you have one to sell?😃
Wonderful, you are very good. How did you build the guide you put on the Proxxon? Or where do you buy it?
thank you so much artist
Please check my store at www.shiftinglands.com
it is basically a 1:1 pantograph. Actually a pantograph might be a good accessory too.
will your stuff work with Hercules ?
Yes all tools fit on the Hercues
Thank you for getting back to me I was looking to buy this tool but all I can find are templates.
Wow...is this available to buy? If so, who carries it in the U.S.?
Well, working on it very seriously!
where can it be purchased in the USA?
for now you can only order it through the "rest of the world"shop of shiftinglands.com
@@Shiftinglands Thank You I'll look into that. I disable firefighter and hobbies keep my life interesting. My grandpa from Netherlands too.
How much are you asking for these? Id love to give it a shot.
please visit SHiftinglands.com
Kind regrds, Gerard
Link to your website and webshop???????????????????
shp@shiftinglands.com
@@Shiftinglands i meant to the article you are selling 😄
@@Oghar999 shiftinglands.com is the website and shop.shiftinglands.com/ is the shop. (sorry)
😮 wow super
Can these tools work on non proxxon foam cutters?
Depends on the type of tool. The Hercules is the exact sme machine and I know there is another one but forgotten the name.
Fantástico, parabéns!!!
Gostaria do projeto para fazer.
Exceptional Where can you buy all those templates? thanks
shiftinglands.com
I like your video for this tool. I really like this b/c it opens up the prospects of molding. However the tracer is not as 'fine' as I'd like so it cannot read a more detailed template.
Actually there is another tracer that comes with the tool that uses a thin nail as tracer.
Классная приспособа. Лайк. И подписка!
I do not see this available from the Shiftinglands webshop -- was it discontinued?
Must be up as far as I can see!
Please what is the make of this hot wire cutter
Proxxon Hot Wire Cutter
This is pretty cool. Did you invent/design this jig?
Yes I did!
@@Shiftinglands that's amazing!! Great job, I'm sure it will help many people make amazing pieces.
Absolut genial. Da könnte ich schwach werden.
Bleib stark ;-)
Das ist _fantastiche!_ Very much cool, as us Yanks would say today.
WOW no other word needed
Thanks!
Are you selling this as a set?
Hello Paul, Yes the tool is available. You can check it out at www.shiftinglands.com
hello sir it's beautiful If it's possible buy item how do I have to thank you
Hi Lacrima, you just did :-) so many thanks to you also!
i want this machine in india
Just just superb fabulous fantastic simple and east to use a great invention intrested in buying this fantastic templates .
All right, shapes, shapes, shapes! Come on in shapes lovers! Here at the Shifting Lands we're slashing shapes in half! Give us an offer on our vast selection of shapes, this is a shapes blow out! All right, we got white shapes, black shapes, Spanish shapes, yellow shapes, we got hot shapes, cold shapes, we got wet shapes, we got smelly shapes, we got hairy shapes, bloody shapes, we got snappin' shapes, we got silk shapes, velvet shapes, nalga high shapes, we even got horse shapes, dog shapes, chicken shapes! Come on, you want shapes, come on in, shapeslovers! If we don't got it, you don't want it! Come on in, shapeslovers!
Amazing... thanks
ok j'ai trouver le site merci ;-)
Awesome
Who made the parts?
I did. It is my own design.
ich weiß zwar noch nicht was ich damit bauen werde..... aber ich muss es haben
Nah, sehr gerne!
Hi Shiftinglands
I am trying to find a way to contact you to speak with you please
Looking to Purchase Yours Jigs this will suit me like Bees to Honey
This is just really Amazing Videos you have made and you make a lot more Videos
Greetings from the South West of Ireland V94RXH9 Teady
Berapa harganya
جميل جدآ 👍🏽
awesome
Thanks a lot!
What Foam are you cutting?
Carefull Cutting the Green Polyurethane Foam on hot wires, it is toxic!
(Apologies if it is polystyrene-based foam, Just FYI)
where can i buy this tool
Ohhh wawwwwwww
I am retarded. Could i build this without f00king it up?
Traducción
Witchcraft!
Are these compatible with the Hercules hot wire table?