Did you dry the filament? Did you tune in after drying it? I have a P1S and tune all my filaments using orca slicer and I've had great results. I haven't yet tried this filament, but am thinking about ordering it as Sunlu PETG is consistently our of stock...
Hello! For high-speed printing, you need to calibrate the flow volume. I think it should be around 25-30 mm³. The default is 12. Have you changed this filament parameter?
Havent had jamming issues but their rolls consistently hang up when the filament gets to side of the spool when using the ams. Feels silly to say its spooled too well, but it just doesn't have the power to pull it when it gets stuck there.
Did you dry the filament? Did you tune in after drying it? I have a P1S and tune all my filaments using orca slicer and I've had great results. I haven't yet tried this filament, but am thinking about ordering it as Sunlu PETG is consistently our of stock...
Hello! For high-speed printing, you need to calibrate the flow volume. I think it should be around 25-30 mm³. The default is 12. Have you changed this filament parameter?
You bet! Still having issues. Filament is dry
Havent had jamming issues but their rolls consistently hang up when the filament gets to side of the spool when using the ams. Feels silly to say its spooled too well, but it just doesn't have the power to pull it when it gets stuck there.
I noticed the roll hits the arm and thats what causes a jam for me, not a jam in nozzle but a jam in the feeding and pops a "filament is stuck " error
Mine was jamming due to the cardboard roll hanging up on the stock spool, until I added a spool adapter to reduce friction.
I'm running A1 mini with the same filament
use bambu filament, or don't use their settings for other filament
It's the generic settings used generally or it's brand matched settings.