Unifi Access Ultra Setup Guide
ฝัง
- เผยแพร่เมื่อ 4 ส.ค. 2024
- In this video we give you a real world example of installing the new Unifi Access Ultra door access device on a door in our office and getting it set up inside Unifi Access. We cover the installation of the door sticke into a metal door jam and running Cat 6 and 2 wire cable to the Door access hub/reader. We had to modify the door jam using a jigsaw and a multitool. See how aprofessional low voltage installer deals with issuse that arise along the way.
Unifi Access Ultra Affiliate LInk: tinyurl.com/yc776yxh
Wallfishing Masterclass: • Wall Wire Fishing Mast...
OUR 2024 TH-cam GEAR
🔸 Main Camera: geni.us/YNZTB
🔸 Lens: geni.us/Z6mUdIq
🔸 Shotgun Mic: geni.us/UpXka
🔸 Wireless Mic: geni.us/BaVVdn
🔸 Teleprompter: geni.us/sJBNC
🔸 RGB Light (for colored wall effect): geni.us/4TREIMm
🔸 Streaming Capture Card: geni.us/4TREIMm
🔸 Studio Light: geni.us/qp1kRS
🔸 Studio Light Diffuser: geni.us/u81jcA
🔸 Audio Recorder: geni.us/AHrG
🔸 Electric Sit/Stand Desk: geni.us/fXRNn9
🔸Background music/effects: share.epidemicsound.com/wcd3n2
Connect with us!
www.dpctechnology.com
/ dpctechsupport
/ dpctechsupport
/ dpctechnology
00:00 - Project overview
00:28 - All in one product
00:58 - First step
02:11 - Stuck in a door jam
03:01 - Fishing for wires
04:35 - The hole in the wall
06:48 - Setting up the UI
08:46 - Opening the door with a phone (crazy)
10:09 - Who is Unifi Access Ultra for?
11:03 - Tamper resistance
![[Live] : ONE FIGHT NIGHT 24 วันนี้!! “จาร์เร็ด vs กุสตาโว”](http://i.ytimg.com/vi/ENNA-fsT67c/mqdefault.jpg)
Great video! getting ours setup this weekend
@@MactelecomNetworks can wait to compare notes!!
I greatly appreciate the real-life install videos. It shows the common issues you run into and how you overcame them which is honestly helpful for most of us DIY-ers out here! It's often frustrating to watch a "perfect install" video or a "let's just set this up on a table for a demo" video and it looks all super easy and then you go to do it and end up spending 3 days and 4 trips to Home Depot. Also, one question I couldn't readily find an answer to: What is the maximum distance for running the low volt wires from the Access Ultra (or the Access Hub) to the actual lock? Thanks again for all the great videos!
@@DominicRusso17 it's a good question, I don't know but will find out..
Great video! Your Protect videos have helped me tremendously and these Access videos are giving me the confidence to try what has been a daunting and complex endeavor until now.
@@matthodgson5747 thanks for the kind feedback!!
Great video. I always thought a hub was required.
Not for the new Ultra, it's a great fit for those lower security interior doors.. I love it...
Thanks for sharing, appreciate sharing the installation process
@@AlexGompper 👍👍👍
As I have stated in previous videos, yours are some of the best on TH-cam. My only comment on this product would be it would be perfect if there was a keypad on this too. I could see this being used at Air BnB's as well as most of the entry doors on my house.
@@switz11 that would be cool!
Hey Clay, you are my go-to for anything Ubiquiti. I can't find one but have you done a video on the Ubiquiti EV Station Pro? An in-depth video on setting up accounts and how to track usage would be helpful. Thanks!
@@switz11 I'm installing pro and regular next week 😂😂. U must have esp
Its unfortunate no dps input
What about request to exit?
It has an input for request to exit. Our door does not need it.
nice videos, are you open to ideas
So I'm a little confused now with the electric lock option. We have a metal frame glass door out front that doesn't have a latch (like the little thingy that you'd turn a door knob to unhook the door from the plate/frame to open it). It's just a handle and you pull or push to open the door, and it has a lock that latches when we close up for the day. We want to do an electric lock but not sure if that would work in our door situation. Would the electric lock make the lock itself turn to lock/unlock as we push the Exit button (or swipe to enter), if that makes sense..? Or would we have to use the magnetic lock option since there's no door latch thingy?
@@dw-dj1ii it needs an electric mag lock
Why was the large wall plate used?
@@NathanSweet it comes with the ultra..
@@DPCTechnology I mean that I think it would be cleaner to mount the ultra on the wall without the plate. The plate is larger than the ultra and doesn't look as clean. I'm wondering if the plate is optional?
@@NathanSweet you could go either way. It actually looks pretty good in the room.
Fantastic video; What electric Striker you are using or prefer. It will be interesting to hear base on your expertise which strikers (brand) work best and why same with Cables and wires ...
@@user-lq3ji9kb7z I've used a bunch, this time I just used the UniFi one, it was fairly priced and worked.like a champ.. others were just high rated Amazon strikes or mag locks..
@@DPCTechnology Thanks
Just tried to install one of these today, we used the slim plate and for some reason, we cant get it to latch in place. even by hand with the bracket just resting on the back of it!
Our fit without issue. Maybe throw up a picture on reddit or fb and Ill take a look..
Does the reader require security screws to remove it from the wall or does it just pop off with a tug?
@@brandonreidy6989 if someone wants to rip it off the wall they could, but they could kick the door down too.. it alarms when tampered with and fails to locked..
@@DPCTechnology agreed. More curious if that was part of the design or not. A big difference between a curious person vs. Someone determined to break in. If someone can just grab it and rip the holding tabs off vs someone having the proper tools to remove it with intention. Also says something about the build quality as well.
@@brandonreidy6989 agreed, like any security feature I think less info online is better than more.. I touched on it but don't want to over share..
I would respect this video a lot more if he was using anything but Ryobi tools.
You nailed it! The whole team was making fun of Sean when he was filming...
I was thinking to use this for a house side gate, noting that it's IP rated, unlike the lite, and comes with a inbuilt hub unlike the g2 reader.
Then a g2 reader pro for the front door, and a g2 reader for the back door to both run off the same hub.
I'm trying to think of an elegant solution to not need 2 of these on the gate (one on each side)?
@@will67755 don't think this is the solution..
You'd recommend using 1x g2 reader (preferable, or 2 if i need to) and 1x extra hub?
@@will67755 I think u can get away with one
This is great and a fair price finally, but, one problem, anyone can now yank that out and put power to the strike plate with something like a battery and they’re in.. So, good for convenience, security, not so much.
@@waynenocton it fails locked...
@@DPCTechnology I think you misunderstood me, you can pull it from the wall and apply 12 volts and the door will open.
@@waynenocton You can also kick in the door... I think a thief would do that first..
@@DPCTechnology that would make a break in obvious, compared to no trace whatsoever. I do like it, and the simplicity and price though, have 4 in my cart now, soon as I manage to catch the Display Cast in stock. I use the notification thing from Crosstalk Solutions, but still can’t get it in time, they sell out quick.