Lol your video highlights the one thing I dislike about cordless dewalt impacts (and probably others) the stupid direction switch. I'm always double checking I didn't accidently switch directions wearing heavy gloves or mitts in the winter. I wish it was set up like an air impact.
Hey man I used a paint pen. But for the sockets I used a lot I'd paint them diff colors like a 19mm I would make orange etc. Just put them outside spray primer then paint easy done. U can see the orange socket in some of the vids
Get rid of the adapter and use a 3/8" impact socket and a 5 ah battery. My 902 will remove My Ford SD pick-up lug nuts that are torqued to 155 Ft lbs with No problem.
Badass tool! I’m just thinking about all the people watching, very concerned about the random guy removing lug nuts on their cars in the parking lot! Lmao!
Craig caliper bolts yes for sure , caliper bracket bolts not sure. Watch the other video th-cam.com/video/zRnplhXqAaM/w-d-xo.html you can see it doing brakes. Maybe the dewalt mid torque would be good
It says 200 ft-lbs? www.dewalt.com/products/power-tools/impact-drivers-and-wrenches/xtreme-12v-max-brushless-38-in-cordless-impact-wrench-tool-only/dcf902b
@@singlecams I see now the page I read only showed the fastening torque my bad, that's pretty impressive for a 12v I actually just bought one before I made the comment. Thanks for the info it took off my wheel lugs at 100ftlbs like nothing.
Like for example if you look at the Tenwa video that impact with similar power and brushless struggles. So 200 ftlbs is really not strong enough rating to guarantee it will remove lugnuts.
The stubby is awesome I've bought one and I'm not even in the red platform really. That being said I would consider them two different applications the stubby is kinda over kill for a 12v I think the DeWalt is better for light duty applications on the low setting I can mount a porcelain toilet perfectly without cracking the mounting tabs then take it in the garage and tear down a 2 stroke engine.
torque wrench is alway the only trusted tool for tightening wheels lug nuts and bolts, I don’t drive the car without a torque wrench in the trunk for emergency
try to use 3/8 driver impact socket. I use imwaukee Shockwave 3/8 driver 7/8 Deep impact socket Tested this little gun can do 170-175 FT! By the way you must know that 3/8 to 1/2 adapter Reduce some torque and you using chrome adapter!? serious?
Maybe you test on lugnut it can do 175 but you saw in video it could barely remove rusted caliper bolt even with charged batter and impact socket no adapter.
singlecams I mean why do you always do unfair tests? M12 Stubby VS M18 compact impact you use completely different battery and use 3/8 to 1/2 chrome adapter on this gun come bro
I would rather have a snapfresh or lvdian
th-cam.com/video/SupZCgtFAkM/w-d-xo.html
www.youtube.com/watch?v=86dnKAXD6
Try it on the Hondas crank bolt :) If it takes that I will buy it tomorrow
😄
Not even a mid torque van for it
A very capable tool at a reasonable price, kudos to DeWalt.
Lol your video highlights the one thing I dislike about cordless dewalt impacts (and probably others) the stupid direction switch. I'm always double checking I didn't accidently switch directions wearing heavy gloves or mitts in the winter. I wish it was set up like an air impact.
MORE LUG NUT VIDEOS OF DCF902
th-cam.com/video/n3q99BzRl6c/w-d-xo.html
th-cam.com/video/vAGhD91tmtE/w-d-xo.html
How much did that one cost
Hey what do you use to mark your sockets? White paint, nail polish? Trying to find something that doesn't wear away easy.
o Astronomy o use a paint pen an fill in the lettering and wipe off excess with a towel
Hey man I used a paint pen. But for the sockets I used a lot I'd paint them diff colors like a 19mm I would make orange etc. Just put them outside spray primer then paint easy done. U can see the orange socket in some of the vids
Thank you so much for the quick reply guys didn’t expect such a prompt answers.
@@Astrononomy th-cam.com/video/_eNxruUlq3w/w-d-xo.html
Get rid of the adapter and use a 3/8" impact socket and a 5 ah battery. My 902 will remove My Ford SD pick-up lug nuts that are torqued to 155 Ft lbs with No problem.
Badass tool!
I’m just thinking about all the people watching, very concerned about the random guy removing lug nuts on their cars in the parking lot! Lmao!
I'm looking for an impact wrench that I can do brakes with will this dewalt be ok for that or struggle? I already have the 899 but its big
Craig caliper bolts yes for sure , caliper bracket bolts not sure. Watch the other video th-cam.com/video/zRnplhXqAaM/w-d-xo.html you can see it doing brakes. Maybe the dewalt mid torque would be good
Caliper bracket bolts should even be okay especially if you spray first.
there seem to be power lose with the many adapters
DeWalt advertised it at 1500 inch pounds I thought that equaled 125 ftlbs?
It says 200 ft-lbs? www.dewalt.com/products/power-tools/impact-drivers-and-wrenches/xtreme-12v-max-brushless-38-in-cordless-impact-wrench-tool-only/dcf902b
I see it says 1500 fastening and 2400inlbs breakaway - the 2400 gives them the 200
@@singlecams I see now the page I read only showed the fastening torque my bad, that's pretty impressive for a 12v I actually just bought one before I made the comment. Thanks for the info it took off my wheel lugs at 100ftlbs like nothing.
This gun can take off my mdx 22mm lugnut
Like for example if you look at the Tenwa video that impact with similar power and brushless struggles. So 200 ftlbs is really not strong enough rating to guarantee it will remove lugnuts.
Here is tenwa video th-cam.com/video/6YXHcDVXUJs/w-d-xo.html
Wei I watched your video 👍👍
ADDED YOURS TO TOP COMMENT
get the Milwaukee stubby instead
For 99 bucks with charger and two batteries I’ll take the Dewalt all day for what I need in a 3/8 capacity.
The stubby is awesome I've bought one and I'm not even in the red platform really. That being said I would consider them two different applications the stubby is kinda over kill for a 12v I think the DeWalt is better for light duty applications on the low setting I can mount a porcelain toilet perfectly without cracking the mounting tabs then take it in the garage and tear down a 2 stroke engine.
Good video, thanks.
Cool
Good video. I just saw yours 🙂👍🏻
ADDED YOURS TO TOP COMMENT
singlecams thank you 🙂👍🏻
@@singlecams I linked your video from last week in mine :)
@@jeffscomp Thank you
Wouldn't want to depend on that. Also wouldn't trust it for tightening them
torque wrench is alway the only trusted tool for tightening wheels lug nuts and bolts, I don’t drive the car without a torque wrench in the trunk for emergency
Nice video bro...
try to use 3/8 driver impact socket. I use imwaukee Shockwave 3/8 driver 7/8 Deep impact socket Tested this little gun can do 170-175 FT!
By the way you must know that 3/8 to 1/2 adapter Reduce some torque and you using chrome adapter!? serious?
Didnt you watch video when I said it reduce torque??? Reply back
Maybe you test on lugnut it can do 175 but you saw in video it could barely remove rusted caliper bolt even with charged batter and impact socket no adapter.
singlecams I just do the video. I’m trying to put the link on it
@@willy_9361 👍👍
singlecams I mean why do you always do unfair tests? M12 Stubby VS M18 compact impact you use completely different battery and use 3/8 to 1/2 chrome adapter on this gun come bro
Great video