ขนาดวิดีโอ: 1280 X 720853 X 480640 X 360
แสดงแผงควบคุมโปรแกรมเล่น
เล่นอัตโนมัติ
เล่นใหม่
Excelente, eu jamais conseguiria fazer um front de Macan sozinho, a solução que utilizou é muito eficaz.
o cara é bom mesmo... também não me garantiria em fazer sozinho
Great job. I have the same vehicle. My ppf is about 7 years old. What’s the best way to remove it without leaving glue behind. Thanks.
@@1000raulm use a steamer, or let sit under the sun. Peel the edge or corner, Then slowy pull the film towards yourself. That way you don’t leave glue behind.
Good job My friend
Thanks bro
Thank bro
You’re welcome man.
Sensacional Fazer escapou sozinho não é pra qualquer um😅
What is the red thing on the tip of the blow dryer? Also, what's in the spray she sprays?
The red thing on the tip of the heat gun is heat shield tape.
Do you use the rapid tac to clean the surface so the film sticks , do you use alcohol to clean it too?
I only wipe it with alcohol first. Then use rapid tac to help the film stick on to the surface.
Did you do this with a 60" roll?
Yes
DID YOU USE THE 1,6M OR THE 1,82M PPF
I use the 8.5 mil suntek ultra on this one.
hello, what fluids do you use at the moment, I also deal with PPF in the video you can see how great they stick
I use rapid tac.
Hey man I saw that door panel hanger you did. I’d like to get one.
@@TintStyle do you dilute your rapid tack?
@@jayd38357 No.
Quote of the day:“Jobs fill our pockets, adventures fill our soul.”
how long do you use ppf? There are 100 inches x 60 inches?
This one right here is 94X60
@@TintStyle thank you
where are you guys located?
We are located in Edmonton alberta
Do you guys put Ppf on headlamps?
Yes we do.
@@TintStyle do you do it on Porsche Macan, I heard it takes out the coating?
@@sukhoi01 yes they do if not taken off right. I will be uploading a video soon on how to remove ppf on porsches with out damaging the coating.
Where there any issues with Glue line/work lines Or thinning of material
Excelente, eu jamais conseguiria fazer um front de Macan sozinho, a solução que utilizou é muito eficaz.
o cara é bom mesmo... também não me garantiria em fazer sozinho
Great job. I have the same vehicle. My ppf is about 7 years old. What’s the best way to remove it without leaving glue behind. Thanks.
@@1000raulm use a steamer, or let sit under the sun. Peel the edge or corner, Then slowy pull the film towards yourself. That way you don’t leave glue behind.
Good job My friend
Thanks bro
Thank bro
You’re welcome man.
Sensacional Fazer escapou sozinho não é pra qualquer um😅
What is the red thing on the tip of the blow dryer? Also, what's in the spray she sprays?
The red thing on the tip of the heat gun is heat shield tape.
Do you use the rapid tac to clean the surface so the film sticks , do you use alcohol to clean it too?
I only wipe it with alcohol first.
Then use rapid tac to help the film stick on to the surface.
Did you do this with a 60" roll?
Yes
DID YOU USE THE 1,6M OR THE 1,82M PPF
I use the 8.5 mil suntek ultra on this one.
hello, what fluids do you use at the moment, I also deal with PPF in the video you can see how great they stick
I use rapid tac.
Hey man I saw that door panel hanger you did. I’d like to get one.
@@TintStyle do you dilute your rapid tack?
@@jayd38357 No.
Quote of the day:
“Jobs fill our pockets, adventures fill our soul.”
how long do you use ppf? There are 100 inches x 60 inches?
This one right here is 94X60
@@TintStyle thank you
where are you guys located?
We are located in Edmonton alberta
Do you guys put Ppf on headlamps?
Yes we do.
@@TintStyle do you do it on Porsche Macan, I heard it takes out the coating?
@@sukhoi01 yes they do if not taken off right. I will be uploading a video soon on how to remove ppf on porsches with out damaging the coating.
Where there any issues with
Glue line/work lines
Or thinning of material