Love you guys, great quality video with lots of info Im looking to do the same with my jb04, at own risk....😂 Do you use an other injector? Thanks from Holland
Thanks so much for that lovely comment! It’s great when we know people enjoy the effort we put in… we haven’t used a bigger injector because the standard one can still deliver more fuel than we are using at the moment! Maybe with the 4v kit next!
thanks for the reply,what cooler bracket did you use i have 2025 monkey,found the clutch cover dont know if cooler lines will route by my takegawa stock look high exhaust
just had a standard crank big end fail on my 2015 grom with takegawa 143 kit on it. owned from new the bike has been abused in terms of redline everywhere. if it wasn't for the crank failure the piston and bore etc were looking good. it's an excellent kit but as i'm rebuilding i purchased a kitaco 163cc kit + the kitaco crank.. see how it goes after a good tune
Normally use a tad of noise cancellation, but as we made an epic fail and didn’t mic Simon, we had to leave it off this time. Will try the lapel mics next vid👍🏻
Love you guys, great quality video with lots of info
Im looking to do the same with my jb04, at own risk....😂
Do you use an other injector?
Thanks from Holland
Thanks so much for that lovely comment! It’s great when we know people enjoy the effort we put in… we haven’t used a bigger injector because the standard one can still deliver more fuel than we are using at the moment! Maybe with the 4v kit next!
I can't find the summary/numbers. What was it?
Can you get a bigger throttle body and intake manifold?
great video 😊 Did you say you changed the rear sprocket
Yeah…minus 1 tooth to give me a little more clearance on the underbraced swing arm
what oil cooler kit did they use with this intake
@@SteveDeubach we used a 6 row universal cooler from steady garage in the USA👍🏻
@@SmallboreAndMore do you have a video & or a part number for what kit you used
@@SmallboreAndMore also it look like tou changed rt side cover to hookup oil cooler lines what oil cooler bracket did you use
thanks for the reply,what cooler bracket did you use i have 2025 monkey,found the clutch cover dont know if cooler lines will route by my takegawa stock look high exhaust
@@SmallboreAndMore please share with me what cooler bracket you used & where you bought it
just had a standard crank big end fail on my 2015 grom with takegawa 143 kit on it. owned from new the bike has been abused in terms of redline everywhere. if it wasn't for the crank failure the piston and bore etc were looking good. it's an excellent kit but as i'm rebuilding i purchased a kitaco 163cc kit + the kitaco crank.. see how it goes after a good tune
Could you link the tune file? Or a contact to get it mailed?
Just email technical@dynojet.co.uk. Franks team will sort you out
Is the takegawa 145cc kit the same one available at Ben's bikes?? S-stage????
Yes, if you contact Ben, he’ll sort you out with the same kit.
Hello, sorry but I didn't understand very well. In a future video will you test a Takegawa 4 v cylinder head on your 145 cc?
THANKS
Good evening
Yes, we have the Takegawa 4v kit ready to be installed on both the yellow and blue monkeys
Next time lapel mics should be used. The echo in the room while you are talking is pretty bad.
Normally use a tad of noise cancellation, but as we made an epic fail and didn’t mic Simon, we had to leave it off this time. Will try the lapel mics next vid👍🏻