Hey Guys, just a note on where to get this mapping. You can now download this mapping by going to my new companies website www.MIDIMonsters.com . Enjoy! :)
Endo hi Endo, this map is awesome ... great job ... a lot of people on web and my self too are searching for a serious map for the Traktor Z2 , if u ll do a better mapping (especially for a faster effect control ) than the default, would be great. all the best
Hope everyone's well out there and enjoying all the livestreams til concerts start up. for those asking, as I was about how to connect headphones and speakers simultaneously, may have found a way.. I just ordered a traktor audio 2.. details to follow. ✌🏽✌🏽 This mapping is pure brilliance, ROCK on brotha Endo!! Thank you!
Recently started DJing at a strip club. The booth is too small for my S4 and DJing with a mouse sucks balls. Thank you for showing me how to pull my barely used F1 out of storage and turn it into a badass controller! My only beef is that it's way too easy to hit sync when your hand is hovering over faders 1 and 2, but a bit more rehearsal should fix this problem. Keep up the Great work!
Thanks for the kind words Traktor tips! One thing worth adding is that you don't need to use the mixer section on my mapping if your using an External Audio Interface and external mixer. When you're in External Mixing mode in Traktor, the volume faders are disabled. I use the F1 as my primary controller all the time actually, and use the Audio 8 as my soundcard, and using a DJ mixer to do all of the mixing and filters. Guys be sure to check out Traktor tips for some great Traktor tutorials!
Hi Endo, finally downloaded the Mapping. This might seem way out there. I see that the Volume faders are labeled 'Unknown' in Shift mode. Can I map these to the Pitch Control slider and possibly use a Macro mapping for each so that it only starts moving the software pitch control slider once the 'Shift>Volume' fader mapped to it reaches that point? This would obviously be separate from the 'Reverse>Tempo-' and 'Type=Tempo+' mappings if I choose not to have sync on for that track. How would I do this if it is possible please?
This is a sweet mapping! Love it! Ideal for a very portable set up. If you're not using an audio interface and you want to cue up tracks in the headphones you only need an audio splitter to be able to use this straight from your laptop. Audio interface will likely give you better sound quality though! Great Mapping - i'm sure that took a long time!!! Well worth it!
BEAST MODE! This mapping is ridiculous. I was looking to make my own F1 mapping but mostly for fx presets/looping/flux mode tricks. Now I'm definitely inspired. Another great video Mike
Just bought this mapping, nice one! I have a couple of questions though. 1) How can I load a track into deck A-D after browsing? 2) Just switching to hotcues 1-4 (without them starting to play instantly) would be nice.
1) Once you've selected the Song you want by pressing Browser and then turning the Browser Pot to the song you want, press Shift and while holding Shift, select the Deck you want to load it into by pressing one of the four Deck Selector buttons at the bottom of the F1. Not too sure about 2), aven't gone that in depth at this point, I'm sure you can alter the Macros in the Controller Mapping section of the Traktor Preferences.
I love it. Easy to set up and still allows me to use the X1 MK II as my main deck controller. My F1 has sort of become a glorified mixer but it has saved me on buying a mixer for Traktor. Thanks Endo :)
You can map it so each channel can be used as a fader for each deck. A bit fiddly, but it can be done. I used mine with X1 MK II as my main controller for the decks. Loads of mapping online for most uses. I was just using the cheap Traktor soundcard which is perfectly serviceable. I hope that helps.
Been playing a lot with this mapping - find it so perfect for those 'sofa sets', when you just wanna sit on the couch with your laptop F1 and headphones! - I'm gonna do a review on the site!
Hey, thanks so much for your videos!! If it wasn’t for you I wouldn’t even be able to set anything up!! Props will go out to you with any set I make!! Thanks again!!
Excellent video. I did this a few years ago with my Reloop Contour IE. I wanted to just bring my Lap & Controller and since it has the built in SC it allowed me to have a portable controller/mixer hybrid. I have not used anything else since I did this! Maybe I should post a vid w/ my maps :)
Hey Jon, yeah, you can add a third F1 to your setup and use it with my mapping. You would just select the Traktor Kontrol F1-3 and load the .ncm file onto that device. Enjoy!
Hi .. this has given the f1 a nice new set of leggs .. I run it along side a Z2 and have a few issue with multiple buttons activating ... should i be laying the tsi in a certin order ... Cheers Mr ENDO
I was wondering why you assigned the upper right button to Sync when the dedicated Sync button seems to do the same thing. Is there a reason for this? Otherwise I'd rather assign it to Keylock. This is a great .tsi for when you need to mix without space to put or bring a full controller. In conjunction I think I'd make a keyboard mapping to use with it for controlling a few more mixer functions like EQ and simple FX.
I just bought the F1 midi mapping and it is amazing! (I did a similar one myself in a moment of need, but yours exceeds the expectation I had), I'm curious about you X1 Mk2 mapping, there is just short info about it on the midi monster website, is there an info video about it or more info somewhere?
For those of you looking for a C-A-B-D version of this mapping, here's the link to the all new CABD mapping. Ask and you shall receive! midimonsters.com/downloads/traktor-f1-deck/ - Choose the "CABD" option at the bottom.
@@erazor1306 Yup! The mapping will work great alongside the S2. You can use the mapping for all of the shortcuts and the S2 to do the mixing. All of my mappings are modular, so they all work together perfectly. Just make sure you have no mappings in your device drop-down menu that has the ports set to "all ports" and you're good to go!
Only just found this as i had tried TouchOCS (with NO success) Awesome job. I usually use a Denon MC 6000 but this is perfect for smaller spaces or just messing about at home with. Just one request. Would it be possible to map the effects to the filter knobs on a shift function? Not too bothered about the dry/wet, just the ability to control the effect. Shift & type and Sift & Size could turn the effect on and off. One observation as well. The reverse button slams my key fully right upon press and fully left on release. Was that intentional?
Got another question. If i browse trough the Playlists, How could select a playlist. At my browser there are Playlists like 90s, 80s, HipHop or something like this. These are main Folders. I want to open this Folders to see the individual Playlists. Which Knob is mapped for that?
Sup Endo. i have enjoyed your mapping for the F1 and have adjusted a few features. what i need to know is do u have a way to have the rel mode to always activate when u load up a track?
Glad you like the mapping! Are you using the mapping with Timecode? Are you saying you don't want the play button to turn on when you push the hotcues? In this case you would need to remove the play command from the mapping so that it doesn't turn relative mode off. If you want to make a more custom mapping e-mail me at Mike@DJEndo.com since I do one on one mapping sessions.
Do you have any tutorials about midi mapping and changing this just a little? love everything, but dont need the 4 decks. was gonna change two of the top faders and knobs for effects. Thanks love the mapping!
I didn't realise you worked of all those Endo, I'm in the PTDJA with Pete and Nicole. Just got a basically new f1 for £100 never plugged in! Has there been update to Traktor 4 on a map for the f1?
@DeeJayEndo purchased, I know what I'll be doing today. Very much looking forwards to getting the f1 rocking. Also, passed on your warm regards through PTDJA. Stay blessed Endo 🙏
HI Mike. I've spent some time using this mapping now and wondered if there was a way to only have the volume faders using your mapping in conjunction with One of the remix decks where the faders in the internal mixer only move once the controller fader reaches that point? To put it another way, if I have mixer levels set in your mapping then switch to Remix Deck mode and adjust any of the Remix Deck Volume Faders, as soon as you touch the faders, they jump to that position and cause an abrupt volume change. Can we avoid this by changing something in the Macros settings in the Controller Preferences section?
Hi Endo, the mapping looks great but I can't figure out why it isn't working. I pressed shift + browse and all the lights went yellow. It's not controlling Traktor at all but when I press shift + browse again it went back to normal F1 remix deck controller. Thanks for all your videos, I basically learned how to use Traktor through your videos.
Always loved your work ... but this mapping is incongruous with my TWO D2 set-up for STEMS ... I either I messed up or the mapping conflicted ...perhaps you'll update this mapping to use with D2s ... cheers
This mapping is so enticing. I want to use it but have a question. I currently use (2) Kontrol F1s in my setup. The first is for classic use of the remix decks. The other F1 is used for the Tekken Instant Grat effects mapping. These along with an S4. Is it possible to add a third Kontrol F1 to my setup to run your 4 deck mapping as well and keep what i already have? I would like to loose the S4 and simply run (3) Kontrol F1s and my Audio2. Thanks.
I bought your mapping and it works nicely except for one major issue, I cannot get the browser to actually load a track. I have gone through your entire set-up process multiple times and the browse function works to scroll through but when I push it to load a track it does not work. Any help?
Hey i just bought the mapping, but you did not say how or what i will need to hear the cue track on my headphone. i want to use your mapping so i can send my s4 mk1 to trade in and get a s4 mk2. please tell me what i need to get. the headphone out on my computer will go the club mixer, one usb cable to my f1 and my headphone ?
Great video, I was wondering if I could use this mapping alongside of my S4. For example, the S4 would control decks A and B and the F1 would be used for deck C and D and for flux mode. Would this work? Or would the mappings clash at all.
Hey man, Traktor is totally modular so you can definitely use the F1 in conjunction with the S4, in fact it has some great macros assigned for assigning the headphones, like when you select Deck A, it turns all other decks headphones off and turns Deck A's headphones on. Huge timesaver! The mappings will not clash at all in fact they will work together. If I was you I'd use the F1 to control the Decks and the S4 only for the mixer and effects. Enjoy!
Hi Hovsep. I too will be using the S4 MK2 and F1. Did you try DJ Endo's recommendation to use both as he mentioned? Was it successful? What do you use now? Thanks.
Hello Endo, was wondering if you can help me with the following question... switching from timecode to regular vinyl on traktor A6. Ive heard people say you can switch back and forth by using the direct/thru" on the drop menu, but many say its a hassle recalibrating and all. Is it really such a hassle that it would interfere with a mix/set?. is there a way to do it using the line/phono toggle switch on mixerS, on-the-fly?. Basically id like to switch between analog/digital quickly and efficiently, like a push of a button on the Z2, but im not trying to buy a new mixer just for that (vestax 05pro3vca) thank you
Yeah you can toggle between direct thru and line very easily and you can even MIDI map a deck to switch between the two modes. It shouldn't be a hassle at all.
Hi Endo.. can I use your .tsi file in order do have A and B decks as normal decks, and C and D decks as remix decks? I dont understand, for example, what would happen if I press one of the four "stop" in the bottom.. will i select a channel of a remix deck, or will i select wich deck i will work with?
Basically the F1 works in MIDI Mode (my mapping) when you push Shift Browse, so you could control decks A&B with my mapping then just push shift browse to go into normal Remix Deck Mode. Thanks for watching!
Hey Endo, bought this mapping about a year ago, works great for me on my laptop , however I don't understand how I can "perform" with this even in a private party! I mean it seems I'd need an audio interface to hookup F1 to the PA system or home audio system..... I've connected my laptop to a TV once through HDMI and it still worked great, but I prefer to use a louder system than the TV.... You reply would be appreciated.... thanks Kamy
Hey Kamran, I'm glad you like the mapping and thanks for the feedback! An audio card would definitely be ideal but if you don't have one, you can use the four volume faders to control the channel volume in traktor and the filters as a replacement for EQs. Thanks for watching!
Hey Endo, thanks for Super fast reply ! I usually use the F1 with my DDJsx & Traktor and things are smooth. I also use your mappings when I wanna do mixes with a laptop & headphone. However I'm in a situation now where I'm away on a trip with my laptop & F1, no SX, there's private party they've asked me to play , but there's no mixer or audio interface, I can hoop the laptop directly to the audio system through headphone jack and a RCA connector. However I won't be able to use headphones anymore.... I can get a splitter cable on the headphone jack, but not sure if the mapping would work that way for pre-listening to songs. Would you have any suggestion by any chance ? In any case I'd like to point out that the instructions with the mapping along with the video make installation & usage of it quite easy & fun. Thanks again.
Hi. In the part where you just loaded the file into the controller editor and you can see the mapping names on each button, it looks like there are just 4 cue buttons on the 3rd row down. Is there a mapping that has 8 cues on the same page, ideal in the top 2 rows? Thanks.
Hey Chris, This mapping only has 4 Hotcues but if you ever want to do a custom mapping with me that has 8 I can always do a session with you over zoom. This is the link to set up a lesson any time if you're ever interested - calendly.com/djendo
I've installed the mapping file first on controller editor then after I added the TSI file to the controller manager the in-port & out-port drop box reads "none" and does not allow me to select kontrol f1. Any solutions???
+NeightriX MuziK figured out the issue, even though my driver was installed previously, for some reason it wouldnt detect my F1 driver, try reinstalling the driver it should work.. worked for me thanks +Endo :)
hi ENDO! i have some cuestions already bought a mapping but a i dont know what i bought, i want de C A B D version, can i change it? i can t run the sistem, i dont know why, when i finish the installation, and conect the f1 kontrol, this doesnt work, (start up) i ready wrote to midimonsters but i don t have a answer yet, and soon will expire the link
The C-A-B-D mapping is different from the A-B-C-D mapping so those are sold separately. You have to follow the instructions in the manual step by step and not miss any steps otherwise it won't work. If you follow the instructions carefully, all will work (unless of course there is a problem with the hardware itself). Apologies for the email issue. Our email account got hacked and we get thousands of spam messages a day so I'm looking into a solution.
It depends. You can use the mixer as the soundcard and use the F1 as your controller. Or you can use any soundcard like the Audio 6 as your soundcard and plug that into the club mixer. When using external mixer mode and an external mixer or soundcard, you can monitor the decks through the mixer, or if you use Traktor's internal mixer, you can monitor whatever channel the monitor out is set to separate from the deck.
Hey Benjamin, definitely check out the manual. The Browse button doesn't load into a deck. You have to hold shift and push the bottom buttons. Also check your mappings as per the manual to make sure they aren't conflicting with each other.
Glad you liked the video! If you search for "Traktor Kontrol S4 Endo" you will see all of the tutorials I did for the Traktor Kontrol S4. There is a 3 part series on the Dubspot TH-cam. Its also on my website djendo dot com.
No, but the only thing that's really changed is the Filters are now called "Mixer FX". Everything else is still the same and still works just like it did when I made the mapping. :)
@@DeeJayEndo Thank you for your response but I'm not talking about the controller I'm talking about tractor pro I have tractor pro 3 and it looks a lot different today than it did years ago. So I'm having a hard time using the visual guide
@@josephfranco1495 TRAKTOR PRO 3 looks more or less the same I think except for a little of the over-skinning, so you should be able to find everything you need pretty easily. I don't plan on recording another tutorial for this, unfortunately, but hopefully, this one will stand the test of time as long as possible. :)
@@josephfranco1495 Everything works and pretty much looks the same though. Is there something in the instructions that's stumping you? Everything should work pretty much the same.
@@DeeJayEndo I was stumped. Plugged & it didn't work. So no video tutorials on step by step guide plug or troubleshoot once plugged in. I will do my own tutorial as I learn on my own. It took me days to figure out what I needed to do. Turns out its a setup wizard issue, but finally got it working. The other videos didn't show that, no video did. But days of figuring out paid off at a cost of days on not sleeping or eating, put my life on hold, lol, fueled with frustration losing my mind on wasted time of watching videos that did not explain troubleshoot or initial steps for the F1 installation initial response step by step. Not automic jump it already functioning on screen. But thanks for your supporting effort. I will do a video & give you a plug/shout out for your effort support when no one else did, as I did reached out to others... but nothing. But your response left me on it, not to five up. Thanks again.
DJ Endo can you please let me know if there is any way to set up my AUDIO 10 so I can pre listen to Remix Decks with individual Cues in external mode ???? pleeeeease reply to this, been looking all over for a solution can't figure out a way… D
@@DeeJayEndo so let's say i will use the F1 and this mapping to play in a club... ...(maybe it's a stupid question) but how would i connect the computer to the club's audio system? Would the sound have the necessary quality to be able to play in a club? with an audio card or? i am a bit confused... thanks again
Yup! If you press Shift + Browse you will go into Remix Deck mode and if you press it again you're back to my mapping so you can use it for both! The only thing that might be an issue is the hardware volume faders and filters won't match the software when you go back and forth so you will have to deal with the soft takeover of the knobs and faders, but that's not too much of a big deal unless you're doing a lot on the Remix decks.
@@DeeJayEndo hi Endo! Thanks for your fast response, i normally dont use the remix deck, i use more the control deck, i Need have some FX for my gigs, i Think i will change the volume decks to fx in your mapping, or Maybe with swift i can combines booth? Thsnks a lot for you work! Nice day!
@@djismaellora there is a way to, but it requires making a "user mapping" and is a very complex mapping with the Hotcue colors. I didn't go there with this mapping however I did with my MASCHINE mapping (the colors match the software colors). This is just a MIDI Mapping so I had to choose specific on and off colors for each function.
In theory, you could just load the mapping twice and load the controller editor file twice, then set the ports for each mapping to the different F1s. I haven't tested it, though, and there might be some limitations with having 2 F1s plugged in and using the Controller Editor. Worth testing out and report back to us. :)
You would have to remove the Sync command for the mapping. Try sorting by "comments" then find the sync command and remove it. If you want I also do custom mapping sessions where I can do this for you in a 15 minute session. If you want to set one up, you can do so at calendly.com/djendo
Please send an email to info@MIDIMonsters.com and explain in detail what is happening. There are no problems with the mapping. You just need to follow the steps in the manual including loading the controller manager template and mapping and setting the ports correctly for all of your mappings and it will work with no problems.
Here's the link to the CABD mapping. Just uploaded today. Just make sure to choose the "CABD" option at the bottom. Enjoy! midimonsters.com/downloads/traktor-f1-deck/
Here's the link to the CABD mapping. Just uploaded today. Just make sure to choose the "CABD" option at the bottom. Enjoy! midimonsters.com/downloads/traktor-f1-deck/
Hi, I've suddenly started having problems with this mapping after over a year of it working perfectly. Now whenever I press shift/browse to go into user mode it will flash on for a few seconds then immediately go back to the yellow flashing square of the remix mapping. Occasionally all the squares will go blue but do nothing except browsing with rotary knob and play (only whilst being held) with the usual play button. Anyone else having this problem?
Make sure if you go to preferences - Traktor Kontrol F1 that the MIDI Mode type is set to MIDI Mode. This sounds like it's set to User mapping which would explain why everything is blue. Also delete their generic MIDI Mapping as well so the mappings don't get confused.
Hi thanks for the reply, I have tried it both modes and it still wont work. I also cleared the other MIDI mappings. Still it wont stay in the correct mapping ater pressing shift/browse and will return to either the blue (I guess because then I had it in the wrong mode) or the remix mapping with the yellow flashing squares.
In the mean time I am looking into this issue. Even I've had problems with things like this, especially when messing with step sequencer mappings. Try just removing any mappings that you don't need, make sure the ports are set correctly for each mapping, and that the MIDI Mode type is set to MIDI Mode. Load the template in the controller editor. If that still doesn't work, let me know. Also, it doesn't hurt to update your software and firmware, and drivers as well.
Hi yes I have reinstalled everything many times now and reinstalled drivers etc. Ensured it is in MIDI mode and deleted all other tsi mappings. It might work for a few seconds in the initial start up but then it quickly switches back to remix mode. Then when I press shift and browse the normal the lights come on but no response. The controller is working fine in ableton so its very strange.
Hi crack ¡ i just buy the map but i didn't receive de email with the file, please give me and email and ill send the number of receipt, thanks a lot , cheers
This is so sweet thanks so much Endo!! Bought it and it works perfect, Could you make a 4 deck mixer mapping for the traktor control x1 ?! Like in this video : th-cam.com/video/69srjdq-CYk/w-d-xo.html I would buy that in a second, I know you could make something sweet !!!
Hey Guys, just a note on where to get this mapping. You can now download this mapping by going to my new companies website www.MIDIMonsters.com . Enjoy! :)
Endo hi Endo, this map is awesome ... great job ... a lot of people on web and my self too are searching for a serious map for the Traktor Z2 , if u ll do a better mapping (especially for a faster effect control ) than the default, would be great.
all the best
Hope everyone's well out there and enjoying all the livestreams til concerts start up. for those asking, as I was about how to connect headphones and speakers simultaneously, may have found a way.. I just ordered a traktor audio 2.. details to follow. ✌🏽✌🏽 This mapping is pure brilliance, ROCK on brotha Endo!! Thank you!
Recently started DJing at a strip club. The booth is too small for my S4 and DJing with a mouse sucks balls. Thank you for showing me how to pull my barely used F1 out of storage and turn it into a badass controller!
My only beef is that it's way too easy to hit sync when your hand is hovering over faders 1 and 2, but a bit more rehearsal should fix this problem.
Keep up the Great work!
Thanks for the kind words Traktor tips! One thing worth adding is that you don't need to use the mixer section on my mapping if your using an External Audio Interface and external mixer. When you're in External Mixing mode in Traktor, the volume faders are disabled. I use the F1 as my primary controller all the time actually, and use the Audio 8 as my soundcard, and using a DJ mixer to do all of the mixing and filters. Guys be sure to check out Traktor tips for some great Traktor tutorials!
Hi Endo, finally downloaded the Mapping. This might seem way out there. I see that the Volume faders are labeled 'Unknown' in Shift mode. Can I map these to the Pitch Control slider and possibly use a Macro mapping for each so that it only starts moving the software pitch control slider once the 'Shift>Volume' fader mapped to it reaches that point? This would obviously be separate from the 'Reverse>Tempo-' and 'Type=Tempo+' mappings if I choose not to have sync on for that track. How would I do this if it is possible please?
@@garethmillers5453 did you ever find a way?? im trying to do the same.
This is a sweet mapping! Love it! Ideal for a very portable set up. If you're not using an audio interface and you want to cue up tracks in the headphones you only need an audio splitter to be able to use this straight from your laptop. Audio interface will likely give you better sound quality though!
Great Mapping - i'm sure that took a long time!!! Well worth it!
BEAST MODE! This mapping is ridiculous. I was looking to make my own F1 mapping but mostly for fx presets/looping/flux mode tricks. Now I'm definitely inspired. Another great video Mike
Just bought this mapping, nice one! I have a couple of questions though.
1) How can I load a track into deck A-D after browsing?
2) Just switching to hotcues 1-4 (without them starting to play instantly) would be nice.
1) Once you've selected the Song you want by pressing Browser and then turning the Browser Pot to the song you want, press Shift and while holding Shift, select the Deck you want to load it into by pressing one of the four Deck Selector buttons at the bottom of the F1. Not too sure about 2), aven't gone that in depth at this point, I'm sure you can alter the Macros in the Controller Mapping section of the Traktor Preferences.
I love it. Easy to set up and still allows me to use the X1 MK II as my main deck controller. My F1 has sort of become a glorified mixer but it has saved me on buying a mixer for Traktor. Thanks Endo :)
how do you cue your music is there certain soundcard you use looking to cue 4 channels
You can map it so each channel can be used as a fader for each deck. A bit fiddly, but it can be done. I used mine with X1 MK II as my main controller for the decks. Loads of mapping online for most uses. I was just using the cheap Traktor soundcard which is perfectly serviceable. I hope that helps.
I did it, got the mapping done, thanks, this is awesome, makes it much easier when you got the 411, I thank you, Endo
I love Endo mapping, its super dope and save my live.. Thank ENDO and Salute Ni Instruments
Been playing a lot with this mapping - find it so perfect for those 'sofa sets', when you just wanna sit on the couch with your laptop F1 and headphones! - I'm gonna do a review on the site!
This guy is the Albert Einstein of Traktor period......
This mapping is very helpful and good value for money. Thanks.
This mapping is dope Endo! Great stuff.
Just bought your mapping endo, Its great, i like it a lot :D.
Thank you!! I'm glad you like!
This is still so awesome!! Thank you!
Hey, thanks so much for your videos!! If it wasn’t for you I wouldn’t even be able to set anything up!! Props will go out to you with any set I make!! Thanks again!!
Excellent video. I did this a few years ago with my Reloop Contour IE. I wanted to just bring my Lap & Controller and since it has the built in SC it allowed me to have a portable controller/mixer hybrid. I have not used anything else since I did this!
Maybe I should post a vid w/ my maps :)
Wow ENdo !! You nailed it
Awesome mapping! Just bought it! :)))
Just bought it, great mapping! thanks
you perfectly explain exactly what I was looking for! Thank you pro ;)
Awesome! I'm glad you like the mapping! Thanks for watching :)
Wow. Fantastic! Thank you!
Hey Jon, yeah, you can add a third F1 to your setup and use it with my mapping. You would just select the Traktor Kontrol F1-3 and load the .ncm file onto that device. Enjoy!
Brilliant mapping! Thank you big time!
Hi Endo, saw your video and the mapping for F1 seems stunning - by any chance, do you also have these mappings for Windows or they only work on Macs?!
The mappings work on both windows and mac
Hi .. this has given the f1 a nice new set of leggs .. I run it along side a Z2 and have a few issue with multiple buttons activating ... should i be laying the tsi in a certin order ... Cheers Mr ENDO
thats awesome i was actually wondering how this mapping would work with an external mixer and my audio 8…now i look forward to testing this out….
I was wondering why you assigned the upper right button to Sync when the dedicated Sync button seems to do the same thing. Is there a reason for this? Otherwise I'd rather assign it to Keylock. This is a great .tsi for when you need to mix without space to put or bring a full controller. In conjunction I think I'd make a keyboard mapping to use with it for controlling a few more mixer functions like EQ and simple FX.
I just bought the F1 midi mapping and it is amazing! (I did a similar one myself in a moment of need, but yours exceeds the expectation I had), I'm curious about you X1 Mk2 mapping, there is just short info about it on the midi monster website, is there an info video about it or more info somewhere?
For those of you looking for a C-A-B-D version of this mapping, here's the link to the all new CABD mapping. Ask and you shall receive! midimonsters.com/downloads/traktor-f1-deck/ - Choose the "CABD" option at the bottom.
Can I also use this mapping with my Traktor Kontrol S2? Do I have to set something else to make it work?
@@erazor1306 Yup! The mapping will work great alongside the S2. You can use the mapping for all of the shortcuts and the S2 to do the mixing. All of my mappings are modular, so they all work together perfectly. Just make sure you have no mappings in your device drop-down menu that has the ports set to "all ports" and you're good to go!
great story! clever guy you are.. nice work
Es el que usa marco carola?
Only just found this as i had tried TouchOCS (with NO success) Awesome job. I usually use a Denon MC 6000 but this is perfect for smaller spaces or just messing about at home with. Just one request. Would it be possible to map the effects to the filter knobs on a shift function? Not too bothered about the dry/wet, just the ability to control the effect. Shift & type and Sift & Size could turn the effect on and off. One observation as well. The reverse button slams my key fully right upon press and fully left on release. Was that intentional?
Got another question.
If i browse trough the Playlists, How could select a playlist.
At my browser there are Playlists like 90s, 80s, HipHop or something like this.
These are main Folders.
I want to open this Folders to see the individual Playlists.
Which Knob is mapped for that?
Sup Endo. i have enjoyed your mapping for the F1 and have adjusted a few features. what i need to know is do u have a way to have the rel mode to always activate when u load up a track?
Glad you like the mapping! Are you using the mapping with Timecode? Are you saying you don't want the play button to turn on when you push the hotcues? In this case you would need to remove the play command from the mapping so that it doesn't turn relative mode off. If you want to make a more custom mapping e-mail me at Mike@DJEndo.com since I do one on one mapping sessions.
Do you have any tutorials about midi mapping and changing this just a little? love everything, but dont need the 4 decks. was gonna change two of the top faders and knobs for effects. Thanks love the mapping!
If you want to set up a one on one session I can remap it for you. E-mail me at Mike@DJEndo.com
I didn't realise you worked of all those Endo, I'm in the PTDJA with Pete and Nicole.
Just got a basically new f1 for £100 never plugged in!
Has there been update to Traktor 4 on a map for the f1?
Awesome! Please tell Pete and Nicole I say hi! The mapping still works perfectly with Traktor Pro 4. :)
@DeeJayEndo that's awesome, I'll go buy it now. And of course Endo, I'll pass that on good sir 🙏
@DeeJayEndo purchased, I know what I'll be doing today. Very much looking forwards to getting the f1 rocking. Also, passed on your warm regards through PTDJA. Stay blessed Endo 🙏
HI Mike. I've spent some time using this mapping now and wondered if there was a way to only have the volume faders using your mapping in conjunction with One of the remix decks where the faders in the internal mixer only move once the controller fader reaches that point? To put it another way, if I have mixer levels set in your mapping then switch to Remix Deck mode and adjust any of the Remix Deck Volume Faders, as soon as you touch the faders, they jump to that position and cause an abrupt volume change. Can we avoid this by changing something in the Macros settings in the Controller Preferences section?
Which Soundcard do you use? Directly that from the Laptop or maybe a Pioneer Club Mixer?
Usually an AlphaTheta/Pioneer DJ mixer, or Xone 96.
Just copped the mapping.. This is very convienient to take to a quick gig
For the traktor kontrol F1: Are there any digital download tutorial video free or for a small price?
how to use this mapping and cue the tracks in headphones which audio card is best to cue 2 or 4 tracks ?
Hi Endo, the mapping looks great but I can't figure out why it isn't working. I pressed shift + browse and all the lights went yellow. It's not controlling Traktor at all but when I press shift + browse again it went back to normal F1 remix deck controller. Thanks for all your videos, I basically learned how to use Traktor through your videos.
Mkt Dg I have this exact same problem and can’t find an answer anywhere. Did you get a response?
Thanks.
Hey Guys, I just saw this. Make sure if you go to preferences - Traktor Kontrol F1 that the MIDI Mode type is set to MIDI Mode.
Is it possible to add another mapping? (switching between 3 mappings)
can i use this set up and use my x1 mk1?
Always loved your work ... but this mapping is incongruous with my TWO D2 set-up for STEMS ... I either I messed up or the mapping conflicted ...perhaps you'll update this mapping to use with D2s ... cheers
CABD Mapping coming soon!
This mapping is so enticing. I want to use it but have a question. I currently use (2) Kontrol F1s in my setup. The first is for classic use of the remix decks. The other F1 is used for the Tekken Instant Grat effects mapping. These along with an S4. Is it possible to add a third Kontrol F1 to my setup to run your 4 deck mapping as well and keep what i already have? I would like to loose the S4 and simply run (3) Kontrol F1s and my Audio2. Thanks.
You need a exernal mixer or soundcard?
I bought your mapping and it works nicely except for one major issue, I cannot get the browser to actually load a track. I have gone through your entire set-up process multiple times and the browse function works to scroll through but when I push it to load a track it does not work. Any help?
Hey i just bought the mapping, but you did not say how or what i will need to hear the cue track on my headphone. i want to use your mapping so i can send my s4 mk1 to trade in and get a s4 mk2. please tell me what i need to get. the headphone out on my computer will go the club mixer, one usb cable to my f1 and my headphone ?
Thanks so much!
hello endo ,,, a question like is a called the name of the track that plays when this beginning this video tutorial ???
I can't cue up a track in the headphones???
Impressive !
hey so if you need to press the button to activate a filter with the knobs on top can i use them and map them by default to be the low EQ knob
Great video, I was wondering if I could use this mapping alongside of my S4. For example, the S4 would control decks A and B and the F1 would be used for deck C and D and for flux mode. Would this work? Or would the mappings clash at all.
Hey man, Traktor is totally modular so you can definitely use the F1 in conjunction with the S4, in fact it has some great macros assigned for assigning the headphones, like when you select Deck A, it turns all other decks headphones off and turns Deck A's headphones on. Huge timesaver! The mappings will not clash at all in fact they will work together. If I was you I'd use the F1 to control the Decks and the S4 only for the mixer and effects. Enjoy!
Hi Hovsep. I too will be using the S4 MK2 and F1. Did you try DJ Endo's recommendation to use both as he mentioned? Was it successful? What do you use now? Thanks.
WTF! Thank u so much.
Thank you and enjoy the mapping!
Hello Endo, was wondering if you can help me with the following question...
switching from timecode to regular vinyl on traktor A6. Ive heard people say you can switch back and forth by using the direct/thru" on the drop menu, but many say its a hassle recalibrating and all. Is it really such a hassle that it would interfere with a mix/set?. is there a way to do it using the line/phono toggle switch on mixerS, on-the-fly?. Basically id like to switch between analog/digital quickly and efficiently, like a push of a button on the Z2, but im not trying to buy a new mixer just for that (vestax 05pro3vca) thank you
Yeah you can toggle between direct thru and line very easily and you can even MIDI map a deck to switch between the two modes. It shouldn't be a hassle at all.
@DeeJayEndo Is this F1 setup working with the new versions od traktor pro? Thanks
Yup!
Hi Endo.. can I use your .tsi file in order do have A and B decks as normal decks, and C and D decks as remix decks? I dont understand, for example, what would happen if I press one of the four "stop" in the bottom.. will i select a channel of a remix deck, or will i select wich deck i will work with?
Basically the F1 works in MIDI Mode (my mapping) when you push Shift Browse, so you could control decks A&B with my mapping then just push shift browse to go into normal Remix Deck Mode. Thanks for watching!
Hello i did all the steps but it didn't worked... i always find none into the in port and out port
How Can I get pads colors by midi mapping ?
Hey Endo, bought this mapping about a year ago, works great for me on my laptop , however I don't understand how I can "perform" with this even in a private party! I mean it seems I'd need an audio interface to hookup F1 to the PA system or home audio system.....
I've connected my laptop to a TV once through HDMI and it still worked great, but I prefer to use a louder system than the TV....
You reply would be appreciated....
thanks
Kamy
Hey Kamran, I'm glad you like the mapping and thanks for the feedback! An audio card would definitely be ideal but if you don't have one, you can use the four volume faders to control the channel volume in traktor and the filters as a replacement for EQs. Thanks for watching!
Hey Endo, thanks for Super fast reply ! I usually use the F1 with my DDJsx & Traktor and things are smooth. I also use your mappings when I wanna do mixes with a laptop & headphone.
However I'm in a situation now where I'm away on a trip with my laptop & F1, no SX, there's private party they've asked me to play , but there's no mixer or audio interface, I can hoop the laptop directly to the audio system through headphone jack and a RCA connector. However I won't be able to use headphones anymore.... I can get a splitter cable on the headphone jack, but not sure if the mapping would work that way for pre-listening to songs. Would you have any suggestion by any chance ?
In any case I'd like to point out that the instructions with the mapping along with the video make installation & usage of it quite easy & fun. Thanks again.
@@KamranArasteh any solution? im trying to do the same thing. perhaps a usb soundcard with headphone jack? i might try that today
Hi. In the part where you just loaded the file into the controller editor and you can see the mapping names on each button, it looks like there are just 4 cue buttons on the 3rd row down. Is there a mapping that has 8 cues on the same page, ideal in the top 2 rows? Thanks.
Hey Chris, This mapping only has 4 Hotcues but if you ever want to do a custom mapping with me that has 8 I can always do a session with you over zoom. This is the link to set up a lesson any time if you're ever interested - calendly.com/djendo
I've installed the mapping file first on controller editor then after I added the TSI file to the controller manager the in-port & out-port drop box reads "none" and does not allow me to select kontrol f1. Any solutions???
+NeightriX MuziK figured out the issue, even though my driver was installed previously, for some reason it wouldnt detect my F1 driver, try reinstalling the driver it should work.. worked for me thanks +Endo :)
hi ENDO! i have some cuestions
already bought a mapping but a i dont know what i bought, i want de C A B D version, can i change it?
i can t run the sistem, i dont know why, when i finish the installation, and conect the f1 kontrol, this doesnt work, (start up) i ready wrote to midimonsters but i don t have a answer yet, and soon will expire the link
The C-A-B-D mapping is different from the A-B-C-D mapping so those are sold separately. You have to follow the instructions in the manual step by step and not miss any steps otherwise it won't work. If you follow the instructions carefully, all will work (unless of course there is a problem with the hardware itself). Apologies for the email issue. Our email account got hacked and we get thousands of spam messages a day so I'm looking into a solution.
Would you be able to use your mapping with a Z2? I'm a little confused about the audio routing, I guess.
Thanks in advance!
Yup! The mapping works great with the Z2. It would just be an add on to your Z2 setup.
Can you send me a maping for the f1 to youse on rekord box withe the ddj1000
Cane i use the control f1 fwithe the ddj 1000
Hi, im interested to buy this mapping but I want to ask if I will can edit the map of the faders and filters to use efects, somebody knows it?
what is the real set up, soundcard, cable connection, headphone pre-listening please? i use a audio 6 lit' s possible
It depends. You can use the mixer as the soundcard and use the F1 as your controller. Or you can use any soundcard like the Audio 6 as your soundcard and plug that into the club mixer. When using external mixer mode and an external mixer or soundcard, you can monitor the decks through the mixer, or if you use Traktor's internal mixer, you can monitor whatever channel the monitor out is set to separate from the deck.
Do you have a mapping to use Resolume Arena with Traktor?
I don't sorry!
Hi there, where can I get some support for a mapping setup I bought? Traktor F1 Browse button won't load song into deck...
Hey Benjamin, definitely check out the manual. The Browse button doesn't load into a deck. You have to hold shift and push the bottom buttons. Also check your mappings as per the manual to make sure they aren't conflicting with each other.
Hi Endo... What about if you show us mapping from the begging the KS4 for Traktor?
That will be just AWESOME!
BTW! Thnx for the video !
Glad you liked the video! If you search for "Traktor Kontrol S4 Endo" you will see all of the tutorials I did for the Traktor Kontrol S4. There is a 3 part series on the Dubspot TH-cam. Its also on my website djendo dot com.
Endo non cest de la merde croyer moi beaucoup de beugue il montre pas sa dans la video arnaque
Is there a more up to date 2022 tutorial on this for traktor pro 3?
No, but the only thing that's really changed is the Filters are now called "Mixer FX". Everything else is still the same and still works just like it did when I made the mapping. :)
@@DeeJayEndo Thank you for your response but I'm not talking about the controller I'm talking about tractor pro I have tractor pro 3 and it looks a lot different today than it did years ago. So I'm having a hard time using the visual guide
@@josephfranco1495 TRAKTOR PRO 3 looks more or less the same I think except for a little of the over-skinning, so you should be able to find everything you need pretty easily. I don't plan on recording another tutorial for this, unfortunately, but hopefully, this one will stand the test of time as long as possible. :)
@@josephfranco1495 Everything works and pretty much looks the same though. Is there something in the instructions that's stumping you? Everything should work pretty much the same.
@@DeeJayEndo I was stumped. Plugged & it didn't work. So no video tutorials on step by step guide plug or troubleshoot once plugged in. I will do my own tutorial as I learn on my own. It took me days to figure out what I needed to do. Turns out its a setup wizard issue, but finally got it working. The other videos didn't show that, no video did. But days of figuring out paid off at a cost of days on not sleeping or eating, put my life on hold, lol, fueled with frustration losing my mind on wasted time of watching videos that did not explain troubleshoot or initial steps for the F1 installation initial response step by step. Not automic jump it already functioning on screen. But thanks for your supporting effort. I will do a video & give you a plug/shout out for your effort support when no one else did, as I did reached out to others... but nothing. But your response left me on it, not to five up. Thanks again.
DJ Endo can you please let me know if there is any way to set up my AUDIO 10 so
I can pre listen to Remix Decks with individual Cues in external mode ???? pleeeeease reply to this, been looking all over for a solution can't figure out a way… D
Unfortunately this is not possible. You can only pre listen to individual remix deck slots in Internal Mixing mode.
@@DeeJayEndo so let's say i will use the F1 and this mapping to play in a club... ...(maybe it's a stupid question) but how would i connect the computer to the club's audio system? Would the sound have the necessary quality to be able to play in a club? with an audio card or? i am a bit confused... thanks again
does the mapping work with the new Traktor Pro?
Yup! The mapping works with the most current version of Traktor Pro 3
You now i lovee you right smarthyyy hehe
Hi! Sorry for disturb you, could i have this mapping control 4 decks + remix deck in the same Traktor F1? Thanks
Yup! If you press Shift + Browse you will go into Remix Deck mode and if you press it again you're back to my mapping so you can use it for both! The only thing that might be an issue is the hardware volume faders and filters won't match the software when you go back and forth so you will have to deal with the soft takeover of the knobs and faders, but that's not too much of a big deal unless you're doing a lot on the Remix decks.
@@DeeJayEndo hi Endo! Thanks for your fast response, i normally dont use the remix deck, i use more the control deck, i Need have some FX for my gigs, i Think i will change the volume decks to fx in your mapping, or Maybe with swift i can combines booth? Thsnks a lot for you work! Nice day!
@@djismaellora Yup! You can definitely remap the volume faders and filter knobs to control the FX
@@DeeJayEndo hi again! Thanks por you response! I have another question About HOT CUE, can get same color as traktor? Thanks
@@djismaellora there is a way to, but it requires making a "user mapping" and is a very complex mapping with the Hotcue colors. I didn't go there with this mapping however I did with my MASCHINE mapping (the colors match the software colors). This is just a MIDI Mapping so I had to choose specific on and off colors for each function.
how can i use 2 F1 controller in deck mode?
In theory, you could just load the mapping twice and load the controller editor file twice, then set the ports for each mapping to the different F1s. I haven't tested it, though, and there might be some limitations with having 2 F1s plugged in and using the Controller Editor. Worth testing out and report back to us. :)
hey endo i went to MIDIMonsters website to buy your kontrol f1 mapping.... and it saying author not found.... i need this mapping!
+Jeremy Penn it's there. I think you just clicked on the wrong thing. Try again.
is there anyway to use your hot cue's with out enabling sync?
Did you ever figure this out? I'm trying to do the same thing.
You would have to remove the Sync command for the mapping. Try sorting by "comments" then find the sync command and remove it. If you want I also do custom mapping sessions where I can do this for you in a 15 minute session. If you want to set one up, you can do so at calendly.com/djendo
@Endo Thanks for your reply. I'll give this a shot next time I use a "F1 Only" setup.
hello Endo have a problem with the mapping
Please send an email to info@MIDIMonsters.com and explain in detail what is happening. There are no problems with the mapping. You just need to follow the steps in the manual including loading the controller manager template and mapping and setting the ports correctly for all of your mappings and it will work with no problems.
Ive how do you say my name on it..?
CABD instead of ABCD?
Coming soon!
Here's the link to the CABD mapping. Just uploaded today. Just make sure to choose the "CABD" option at the bottom. Enjoy! midimonsters.com/downloads/traktor-f1-deck/
I already purchased the Mapping in ABCD format. Can I download it in CABD format for free?
works with 2.11 traktor ? cause i'd like to use this...
Yup! It works great with Traktor 2.11
bought... I like and i'll use but i'd prefer CABD decks (as S4)... However good work!
CABD Mapping coming soon!
Here's the link to the CABD mapping. Just uploaded today. Just make sure to choose the "CABD" option at the bottom. Enjoy! midimonsters.com/downloads/traktor-f1-deck/
Is there a Windows version?
This mapping will work on both Windows and Mac
Hi, I've suddenly started having problems with this mapping after over a year of it working perfectly. Now whenever I press shift/browse to go into user mode it will flash on for a few seconds then immediately go back to the yellow flashing square of the remix mapping. Occasionally all the squares will go blue but do nothing except browsing with rotary knob and play (only whilst being held) with the usual play button. Anyone else having this problem?
Make sure if you go to preferences - Traktor Kontrol F1 that the MIDI Mode type is set to MIDI Mode. This sounds like it's set to User mapping which would explain why everything is blue. Also delete their generic MIDI Mapping as well so the mappings don't get confused.
Hi thanks for the reply, I have tried it both modes and it still wont work. I also cleared the other MIDI mappings. Still it wont stay in the correct mapping ater pressing shift/browse and will return to either the blue (I guess because then I had it in the wrong mode) or the remix mapping with the yellow flashing squares.
Are you sure you don't have a step sequencer mapping loaded?
In the mean time I am looking into this issue. Even I've had problems with things like this, especially when messing with step sequencer mappings. Try just removing any mappings that you don't need, make sure the ports are set correctly for each mapping, and that the MIDI Mode type is set to MIDI Mode. Load the template in the controller editor. If that still doesn't work, let me know. Also, it doesn't hurt to update your software and firmware, and drivers as well.
Hi yes I have reinstalled everything many times now and reinstalled drivers etc. Ensured it is in MIDI mode and deleted all other tsi mappings. It might work for a few seconds in the initial start up but then it quickly switches back to remix mode. Then when I press shift and browse the normal the lights come on but no response. The controller is working fine in ableton so its very strange.
Does this work today ?
Yup! Everything still works great. The filters now work as mixer FX as well.
@@DeeJayEndo i honestly
Thought there’s no way this mans gunna reply after eight years 😂 thank you ! . I just bought the f1 z1 x1 ,
so doesnt work for traktor 2 scratch?
It works for Traktor Scratch Pro 2. Since I made it in Traktor Pro 2, it should be compatible with all versions. I haven't changed anything. :)
@@DeeJayEndo thanks!!! its working now!!
@@dongarcia6105 Awesome! 🙌
This mapping doesn’t work for Traktor 3 🙁
really I just bought it for a f1 I'm expecting this week for pro 3
I bought it Yesterday and works amazing on traktor 3.2
Hi crack ¡ i just buy the map but i didn't receive de email with the file, please give me and email and ill send the number of receipt, thanks a lot , cheers
Please e-mail use at info@midimonsters.com
Endo hold up, you had no mixer or speakers,so how did you play a set with no speakers Hmmmm.
D twist Rewind I played out of a TV for 12 hours. Aux in ;)
+Endo that's some macgyver business right there fella, good thinking endo.
No speakers? So what were they listening off of, just the Macbook? 😂
I was playing out of their TV with an RCA to 1/8" cable for over 12 hours.
I’ve done that before. #rememberwhereyoucamefrom 💪🏼
This is so sweet thanks so much Endo!! Bought it and it works perfect, Could you make a 4 deck mixer mapping for the traktor control x1 ?! Like in this video : th-cam.com/video/69srjdq-CYk/w-d-xo.html
I would buy that in a second, I know you could make something sweet !!!
Incredible mapping, thanks so much!!
Hi, im interested to buy this mapping but I want to ask if I will can edit the map of the faders and filters to use efects, somebody knows it?
You can definitely edit the mapping on your own. If you need to set up a one on one session I can also do it for you. E-mail me at Mike@DJEndo.com