Thanks mate, really helped in a Tjoc (The Joy Of Creation) maze area because I didn’t want it constantly going after players, mainly for the fallen but really thanks
YOO NO WAY HE LIKED MY COMMENT BTW the game is fire I played with my friends, the jumpscare were scary asf, especially the little girl one, that caught me off guard
Its probably better if you clone your map (optimize for ink lol) and put the ai on the lower one and maje the "y offset" the y of the ai but add a number. (Unless the map is fully flat)
After the should run, put another if and the condition will be "player get is authority of" wire the target player to the closest player and the object to the monster. If he's the monster authority, then wire it to the next if. Else, wire it to a "rec room object set authority"
Ok but my only problem is I don’t wanna make all this and then have them change the path points or something in beta in a month and have to gut my entire game and remake it all without any of the helpful modern stuff
I have a two story map but when I follow the steps but when on the lower map and the ai spots me it goes on it’s way upstairs till it loses sight of me
For more info I have a basement and an upper floor and I have it set at 50 above the goblin and I have the other thing (the vector create for 2 floor) also set to 50 but for some reason it just decides to go upstairs instead of going for me it’s bugging me so much
Can you make a kind of this with no cuts in the video? When you cut when u were doing the subtract thingy or whatver (I don’t do circuts) You cut on a part so I didn’t know where to hook the bottom of the subtract to, I just am tryna make some ai that can hear you or just wander around
You connect the bottom of the subtract to the position of the AI so the get position that's connected to the Rec Room Object get first with tag. Rematch 7:37. I will make a huge vid later on how to make a full Goblin AI.
Soooo.. when you bake the NAVMESH it has a purple floor… but when I bake the NAVMESH it creates are tall big white box.. anyone know what’s going on? I’m new with circuits! 😬
Make sure you navmesh has objects in it so it can create navmesh, but if it is really tall it might be getting something the is really high up, so fly up there and delete it if that's the problem.
I want to make a monster but I don't know how to really make one with the shapes, so can you make a video showing how to use the shapes to make a monster like the one you showed in the beginning of the video?
yo trevo i think i have a bug on mine. the goblin just like starts changin the path point mid travelin then it just starts spinnin around like hes confused. do u know how to fix this?
The random from list that's getting a random pathpoint might be executing too much. Make sure it's only executing once by checking the if chip and the bool variable that's connected to it. Watch my second ai vid I think I went over this.
Hey you should do a tutorial on the pathfinder component in Rooms2.0 because rec room is starting to lean heavily to 2.0 so it would be more beneficial to people in the future.
You make the animations for your monster and connect the monster to the main part of a clamp, and connect the animations to clamp and play the animation.
It's just how the chip works, only the authority if the room can spawn the AI and by using an event sender and event receiver you can send an event to the room authority to activate the AI.
6:25 i spawned in the AI and it went half way across the map to a random pathpoint and just stayed there and didn’t go anywhere else? How do i fix? Edit: and when i went into my actual map the monster was gone?
Does this follow the nearest player or only room authority? Please let me know because once I learn this I can finally know every circuit possible in recroom
I just found a bug where this actually just follows the room authority but there will be a Video out later today showing how to fix it and make it follow the closest player.
i had one bug now i have a second, once my ai spots me it always knows where i am and it wont stop following me, i think i messed something up by acident while making the sfx. Trevo do you happen to have a high quality picture of all the circuits anywhere online i could use to double check?
Ya, but you can't use the event to get the goblin. You have to add a tag to the goblin and use a rec room object get first with tag chip. Watch my second AI vid i explain how you can have multiple ai's.
Try watching my newest AI video, but make sure the ai pathpoints have the right tag and check your vector 3 creates and vector 3 split. Make sure the y value is added by a certain amount.
How do you make it so you can’t hear the ai “moving” sound? Do you just raise the map and move it far enough away from the main map so players can’t hear it?
Ya, you move your main map or the ai map really high up, so you can't hear the goblin. No, you can't make an invention out of it because half the circuits are beta circuits, and you can't publish beta stuff.
trevo vr why does my goblin ai spazz out when more than 2 people are in the game at oncehe looks at the 2 or more of them making him brake {note i think i made him follow more than 1 player}
@@T-Revo second problem he can't path find anymore i think i just need to try and learn pathfinder instead and nope not that that's a rooms 2 welp i am f--ked i just give up 5 days of this and 3 mental brakedowns how worse can it get.
my there are certain ai path points that once my ai reaches it just stays there until a player agros it im confident i didnt forget any circuits, anybody have a solution?
Make sure that your random from list (The Random that gets a random pathpoint) is only activating once. That's what that If chip and Bool variable is for, it only activates once.
Watch my second AI video. It might help you. Make sure your pivot point is in the middle of your monster and you have the correct tag and can modify with circuits on your monster.
@@T-Revo I have all that but when I spawn the monster in it move’s normally but 2 to 3 sec it starts going in circles in the middle and when I get close to the cube it does not follow me but what it does is stop moving until I reset it
Thanks mate, really helped in a Tjoc (The Joy Of Creation) maze area because I didn’t want it constantly going after players, mainly for the fallen but really thanks
Thanks man you really helped me a Lot! Now I can finally make a horror games it’s still in progress but you helped me a lot
Im working on a horror game and needed an ai, but a lot of videos are outdated , so when this popped up, i was so happy to see it.
YOO NO WAY HE LIKED MY COMMENT
BTW the game is fire I played with my friends, the jumpscare were scary asf, especially the little girl one, that caught me off guard
I'm glad you liked it!
@T-Revo no problem.
BTW do you have a tutorial for the power ups and if not could you by any chance make a video about it? Thank you.
This one made me visit rec room again after several months
I quit rec room but this video popped up and now I want to try to make one again
On rooms 2.0 they have a pathfinder that you can make follow people
Ya, but this is for rooms 1
Its probably better if you clone your map (optimize for ink lol) and put the ai on the lower one and maje the "y offset" the y of the ai but add a number.
(Unless the map is fully flat)
Tysm u deserve a sub!
good looking definitely needed this ❤
After the should run, put another if and the condition will be "player get is authority of" wire the target player to the closest player and the object to the monster. If he's the monster authority, then wire it to the next if. Else, wire it to a "rec room object set authority"
Great idea
bro im levi we played laser tag loll
Mom Trevo Uploaded Another Banger Tutorial Video 🗣️
Bro, I am making a backrooms game and this helps extremly much.
you are so helpful 😭😭
YOOO you trully need to be famous like really famous and do you think you can do a how to make a relistic monster tutorial???
and maybe a jump scare???
I'm not that good at making monster models my friend made the monster. But I'll do a tutorial on how to do a jumpscare for the ai.
@@T-Revo alr thank you soooo much bc I am making a horror game and it kinda sucks lol so thanks
Ok but my only problem is I don’t wanna make all this and then have them change the path points or something in beta in a month and have to gut my entire game and remake it all without any of the helpful modern stuff
They're not gonna change anything that's in beta, but turning on beta is the only why to make the ai
I have a two story map but when I follow the steps but when on the lower map and the ai spots me it goes on it’s way upstairs till it loses sight of me
For more info I have a basement and an upper floor and I have it set at 50 above the goblin and I have the other thing (the vector create for 2 floor) also set to 50 but for some reason it just decides to go upstairs instead of going for me it’s bugging me so much
Watch this 14:36 part of the video. I show how to fix this.
@@T-Revo okay
Can you make a kind of this with no cuts in the video? When you cut when u were doing the subtract thingy or whatver (I don’t do circuts)
You cut on a part so I didn’t know where to hook the bottom of the subtract to, I just am tryna make some ai that can hear you or just wander around
You connect the bottom of the subtract to the position of the AI so the get position that's connected to the Rec Room Object get first with tag. Rematch 7:37. I will make a huge vid later on how to make a full Goblin AI.
@@T-Revo ok
Soooo.. when you bake the NAVMESH it has a purple floor… but when I bake the NAVMESH it creates are tall big white box.. anyone know what’s going on? I’m new with circuits! 😬
Make sure you navmesh has objects in it so it can create navmesh, but if it is really tall it might be getting something the is really high up, so fly up there and delete it if that's the problem.
I want to make a monster but I don't know how to really make one with the shapes, so can you make a video showing how to use the shapes to make a monster like the one you showed in the beginning of the video?
I'm not that good at making monsters, my friend made that.
yo trevo i think i have a bug on mine. the goblin just like starts changin the path point mid travelin then it just starts spinnin around like hes confused. do u know how to fix this?
The random from list that's getting a random pathpoint might be executing too much. Make sure it's only executing once by checking the if chip and the bool variable that's connected to it. Watch my second ai vid I think I went over this.
Great Tutorial. But do you know how I can add a jumpscare sound or sounds in general to my monster?
i need help
Ay trevo, anyway you could show how to hook a CV2/seated jumpscare to this?
Ya ill post another video on how to do some more stuff like this to the ai
Trigger volume hook up player entered to a seat and then the player to the player on the seat also it should teleport you into the seat
Question. Does the monster model need to have all of the parts merged together.
No, just clamp any other part you want on the monster to the clamp.
AHHHH, THE WAY THE MONSTER WALKS IS CREEPY
This video was the best for me
Very awesome sauce tutorial might get traumatized from that game but oh well
Hey you should do a tutorial on the pathfinder component in Rooms2.0 because rec room is starting to lean heavily to 2.0 so it would be more beneficial to people in the future.
Ya, I'm about to make a tutorial on it.
@@T-Revo amazin
Also can I contact u on discord
@@ThatBSgamer sure it's trevo2
When i summoned the ai it always knows where im at and never stops chasing me and dosen't follow the ai path
Check your raycast and see if the distance is correct. Watch my newest ai vid if it still doesn't work. Ill make another AI vid soon.
@@T-Revo alright thanks
Theres a problem with the ai path, theres points where the AI stop pathing and just kinda slides and stops pathing for some reason, any fixes?
Configure the pathpoint and make the wait time 1 second this should fix it. Watch my second ai vid I did some bug fixes for this ai.
what about the rest of the monster like would all of them be coneccted to a cube or something?
If you have multiple pieces to your monster, you connect them all to the clamp.
how do you add animations to the monster like walking, running, and killing
You make the animations for your monster and connect the monster to the main part of a clamp, and connect the animations to clamp and play the animation.
is it just me or the cv2 spawners should already be out of beta by now [its been over a year]
Ya, it's been a while.
Best helper
You should be way more famous you deserves millions of subs and a custom playbutton
Rec room not popular
I don’t understand, how exactly does the authority activate the spawn of the ai?
It's just how the chip works, only the authority if the room can spawn the AI and by using an event sender and event receiver you can send an event to the room authority to activate the AI.
You bassically made me but AI Version
So cool 👌🥶
6:25 i spawned in the AI and it went half way across the map to a random pathpoint and just stayed there and didn’t go anywhere else? How do i fix?
Edit: and when i went into my actual map the monster was gone?
Make the wait time on the pathpoints 1 second
@ i did i set it as 1 but they’re still unresponsive once they reach the point
@T-Revo How do i make it so it doesnt only go after room authority
Watch my other ai tutorials. I showed some bug fixes for the ai and I think that is one of them
Does this follow the nearest player or only room authority? Please let me know because once I learn this I can finally know every circuit possible in recroom
This will follow the closest player but the circuit runs on the room authority.
I just found a bug where this actually just follows the room authority but there will be a Video out later today showing how to fix it and make it follow the closest player.
i had one bug now i have a second, once my ai spots me it always knows where i am and it wont stop following me, i think i messed something up by acident while making the sfx.
Trevo do you happen to have a high quality picture of all the circuits anywhere online i could use to double check?
on your discord server or something
Make sure the player variable is being set to nobody so set it to Invalid Player after the delay. Check 11:59 spot in the vid.
Is there any way to make multiple goblins roam at the same time? I have a good understanding of goblin AI, I made my own but it’s all glitchy.
Ya, but you can't use the event to get the goblin. You have to add a tag to the goblin and use a rec room object get first with tag chip. Watch my second AI vid i explain how you can have multiple ai's.
Dude thank you!
can you make a tutorial on weeping angel ai please?
I don't really know that much on how to make that, but I'll try.
GEETT THE CAMERA HE FINALLY POSTED A VIDEO
THIS IS A MOMENT IN HISTORY, TAKE A PICTURE
pretty sick, I didn´t know that this engine / software exists. :D
can you make a tutorial on how to make an ai that moves when you look away or even a scp 096 ai?
maybe
6:45 I'm here
Thank you so much im making a horror game and this helped you deserve more subs
Same im also trying to make a horror game
@@GraveGTVR nice whats the type of horror game if your ok with telling me?
@@-Skrael- Sry im late but its nightmare huggywuggyforbidden if you want to help you can.
Hay i have a problem when i spon the event reserver it only gives me one orange pin what do i do about that?
You have to configure it and make it a update 30hz
What's the game name from that thumbnail of this video pls. i know it's rec room but the title of the game inside of rec room game.
Silent Ward
@@T-Revo THANK YOU SIGMA- ayo
Is there any way to make the goblin faster than 10? It’s kinda lame because my game has a huge map, and you have to move slower because of the limit.
There's no limit to how fast your ai can go. Just make the ai set pathing speed chip to however much you want.
@@T-Revo oh alright, I was trying to change the speed by configuring the spawner
Everything works but my monster wont spawn above the ai. I did everything you said but thats the only problem im having.
Make sure the Y value on the vector3 that's is 10 or how high your map is.
I dont know what i did but the block i used it does not go up slopes with the goblin
Make sure you have an add connected to the Y between the Vector3 split and Vector3 create.
My monster got stuck on tue ai path points
Yeah I have a problem my box does not move up to the map when I spawn the goblin. How do I fix this?
Also my goblin won’t follow the path points.
Try watching my newest AI video, but make sure the ai pathpoints have the right tag and check your vector 3 creates and vector 3 split. Make sure the y value is added by a certain amount.
@@T-Revo thanks! I’ll see if it works.
Looks way better than what i made
You would give the ai a tag and get first with that tag, instead of using ai spawn event
Ya you can do that too
You should make a tutorial on the new pathfinder in rooms 2.0
Will do
can you make a tut on how to make a in play jumpscare?
Yup, a video is abouts to come out on how to put animations and other stuff on the ai.
the voice thing doesn't work please help
omg you jit I’m AlbinoSphynx I go to your workshops and then I stumble upon this and I’m in visible shock after checking the creator of the vid
Whats the workshops???
@@jimmy918w47 I forgor
Wait, Albino, it been awhile
@@UnknownFilmzRR you know what the workshops are called
@@UnknownFilmzRR I can either be completely screwed or just having some nostalgia
who are you
Uhh do you think you can help me? I really do not have the time or patience to do it…
i finished the ai but can i have help animating
Wait why dont u just put it in the workshop
because you don’t learn anything
daylightwastaken fr
How to I hook up my monster with an animation when I can’t put a tag on it
Watch my second ai vid it shows how to use a trigger volume instead of using tags.
Alr thx
I like it but the pathpoints make my goblin stupid
How do you make it so you can’t hear the ai “moving” sound? Do you just raise the map and move it far enough away from the main map so players can’t hear it?
Also is it possible to make this an invention? (Sorry I’m lazy and slow lol)
Ya, you move your main map or the ai map really high up, so you can't hear the goblin. No, you can't make an invention out of it because half the circuits are beta circuits, and you can't publish beta stuff.
Aii ty man
Great tutorial!
For some reason randomly the goblin starts going one way then in a millisecond to another and repeats
Make sure the random that is randoming the path points is only executing once.
@T-Revo it is but it's still be weird tho it might my because a connected a path point to several others edit: nvm it's not that
@@T-Revo maybe it's because the map is too big
@T-Revo it got better but randomly he tweaks out
Question can I make the ai be ballin just in case the player is breaking its ankles
sure
This is cool but
FYI: the goblin AI is outdated, use the pathfinder component instead, it’ll save you a headache and a half
FYI it’s in rooms 2.0 only which is also a headache due to it not fully being out yet.
Ya this is for rooms 1, if your gonna use rooms 2.0 definitely use the pathfinder.
@@T-Revo yea
When i did this tutorial the cube didnt follow the goblin is there a fix?
Make sure your set transform chip has no errors, and make sure your rec room object get first with tag chip has the same tag as the cube.
trevo vr why does my goblin ai spazz out when more than 2 people are in the game at oncehe looks at the 2 or more of them making him brake {note i think i made him follow more than 1 player}
Make sure the bool variable is synced and make sure you have a if player is room authority chip after your update 30hrz event receiver.
@@T-Revo second problem he can't path find anymore i think i just need to try and learn pathfinder instead and nope not that that's a rooms 2 welp i am f--ked i just give up 5 days of this and 3 mental brakedowns how worse can it get.
@@T-Revo why did you cut the vid after the connect the player head position to the subtract chip i can't see what the bottom connects to.
The bottom of the subtract is connected to the position of the ai
@@T-Revo why is there so many cuts in the video when you need to wire something its so anoying...
my there are certain ai path points that once my ai reaches it just stays there until a player agros it
im confident i didnt forget any circuits, anybody have a solution?
Configure the pathpoint and make the pause time 1 second, it should work
thanks think that worked but it took along time since ive already made a huge map😭
can you make it an invention please i'll buy it😭😭🙏🙏
I can't it uses beta circuits and I can't publish beta stuff
I didn't know you had to use an event to control the ai. I though it was just broke
what voices that is perfect
btw im making a horror game were its a pvp but you can kill the monster so ima use this video and a boss health thing from other tuts
👍
the spawner component is in beta
Ya, that's why you gotta turn on beta content.
when i try to make the ai do the ai paths it doesnt turn on
Make sure your tags for the monster are correct
@@T-Revo thanks
How do you make animation with that ai?
th-cam.com/video/Bib_WB_NYSM/w-d-xo.htmlsi=5bWJbcBybp4JHe3Y
Can you make this an invention?
No, you can't publish beta inventions but you can make it an unpublished inventions so you don't have to keep on remaking it.
Is this in rooms 2.0
No, that's why it's a goblin AI
Help its not working it just keeps following me 😢
Watch my newest AI vid it's a lot better.
@@T-Revo alright
@@T-Revo wanna help me build my world?
My frontal lobe is pulsing
Tysm
The goblin wont spawn for some reason
You have to make sure you are the room authority if you are not the room authority. Watch 15:15 in the vid to spawn the goblin.
Bro ik u put everything nd show how to do but bro im still lost 😢
You should make it so it can only hear you but not see you
Just get rid of the raycast, and the if that is checking if the raycast detected a player.
@@T-Revo k
how do i fix it going to so many points before it even gets to 1?
Make sure that your random from list (The Random that gets a random pathpoint) is only activating once. That's what that If chip and Bool variable is for, it only activates once.
help my monster wont move 🙃
Make sure your monster has can modify with circuits on in the configure settings and make sure it has the right tag.
@@T-Revo yea I did that but it still won’t move
@@Novabutbetter watch my new ai vid it might help you.
ok
Would the cube be the centre of the chest?
Ya
@@T-Revo alright, also would it be possible for you to make a video on how to animate/ get better at animating the monsters n that
@G1ZM04NDG4DG3T I made a video on that and my recent ai vid I show how to put animations on it too.
my cube cant see me
Can you help me
It doesn’t work for me 😢
Watch my second AI video. It might help you. Make sure your pivot point is in the middle of your monster and you have the correct tag and can modify with circuits on your monster.
@@T-Revo I have all that but when I spawn the monster in it move’s normally but 2 to 3 sec it starts going in circles in the middle and when I get close to the cube it does not follow me but what it does is stop moving until I reset it
I love skibidi toilet
Naw
nvm
He keeps going to the path points not to me when I’m close 8:40
Make sure the bool variable is setting to false when it sees a player.
@@T-RevoTy man
Make it invis idk if you can I'm a art person
You can't make the goblin invisible that's why you need two separate maps, one for the goblin and one for the real map.
@@T-Revo Thx for correcting me I'm mostly make models so thx
I crashed AND NOW I NEED TO DO IT
ALL OVER
Load the auto save
@@T-Revo make a new goblin ai it's outdated
Dont work1