Hey Chad & Jolene. I enjoyed watching you make the “shaker” cover. When you wondered what to do for the “corners” and you came up with the idea of making them like an Airstream was good. Something I do, which comes in handy for spots like that, is I save the steel toe inserts out of my old work boots - they have quite a deep compound curve and they are left and right handed. I’m actually going to use a couple of pairs when I enlarge the sump of my 460 oil pan sometime soon. Keep up the great work you two 😃👍
I was mentored for auto body basics but always had a love for metal work this really opened my eyes on how to achieve bends on thicker gauge steel I really enjoyed it
I added a Shaker scoop to my Black and Blue 69 mustang, Also shared you videos with brother, son and best friends. Love your creativity. You inspire me to try new things.
I'm 58 and disabled due to several spinal surgeries n other illnesses. I bought a 1950 Chevy Delux, of course it has rust but either way I'ma go for it. After watching you for bout a year, I'm gonna let my mind and ideas run loose. I used to think my ideas were crazy but after watching you, lol hell I'm normal. So thanks for releasing the Cracking! Take care my friend and say hello to your beautiful wife for me. Y'all take care from Gonzales Louisiana
Loved your comment on Jolene's taping skills and how proud Jim would be to see how little tape she used. You said it would probably bring Jim to tears. Love the show and Fina.
Wow!! Bad Chad and Jolene, I've been watching your vidios for months almost daily, to see your enthusiasm and work is down to earth,, and to see your viewers into it, great follower's and comments
I went out and bought a welder Sunday because of you. And because of you it's a Lincoln. It's the 140HD Weld Pak Once it pays me back I'm going to look closer at getting that plasma cutter.
Amazing how Chad just lines stuff up and most times it spot on. A true Craftsman and artist. Also amazing how Jolene gets all the little stuff. Love watching.
This was really interesting to watch. Love watching completely fabricated pieces you made up in your mind. Thank you Chad and Jolene. Shared with a friend.
I have found that a “ Tailors “ tape works far better then a self rolling tape measure . They lay nice and flat on curves . You can get them at any sewing supply store and the com in varying lengths . I used to do Custom auto interiors, except for welding , it’s similar fabrication - no welding -lots of sewing
You do a great job on everything you do. I'm trying to save up to get a welder so that I can start on a project of my own . I have everything else and even the project so ,I'm ready to go as soon as I get it together. In the mean time I'll just keep watching and learning. Keep up the great work and God Bless you guys and your family. 💯👍👍🙏🙏✌😊✌
I've watched ever so many of your videos Chad, and have to say this one was most informative! At the beginning I was thinking how the hell is he gonna make all those curves ? .... You killed it Chad !!!
GID DAY Chad & Jolene wasn't Dane so full of very good information yesterday, he is one very nice man i hope we do see more of him in the near future..
You are an amazing artist bad Chad🤔. For never making something like that before and figuring it all out right in front of our eyes in just over an hour is amazing to me !! I learned so much from this channel it’s amazing 🤩 🥇🥇
Just catching up on your videos and man you are a wizard with that sheet metal. I don't know if you have ever heard of being in a "flow state" but man you are there when you are working on that metal.
The shaker is going to look good Chad you make it look easy to make one thank you for the great videos elvis is really going to be king of your cars with the color you chose its fit for a king
Another fun project to get Elvis dressed up.
Best channel on TH-cam. Keep up the good work team Hiltz.
Hey Chad & Jolene.
I enjoyed watching you make the “shaker” cover. When you wondered what to do for the “corners” and you came up with the idea of making them like an Airstream was good. Something I do, which comes in handy for spots like that, is I save the steel toe inserts out of my old work boots - they have quite a deep compound curve and they are left and right handed. I’m actually going to use a couple of pairs when I enlarge the sump of my 460 oil pan sometime soon.
Keep up the great work you two
😃👍
Just a beginner but since watching you, I have used the taper/shrinking method for jeep project. I appreciate your skill so much.
I was mentored for auto body basics but always had a love for metal work this really opened my eyes on how to achieve bends on thicker gauge steel I really enjoyed it
I added a Shaker scoop to my Black and Blue 69 mustang, Also shared you videos with brother, son and best friends. Love your creativity. You inspire me to try new things.
I'm 58 and disabled due to several spinal surgeries n other illnesses. I bought a 1950 Chevy Delux, of course it has rust but either way I'ma go for it. After watching you for bout a year, I'm gonna let my mind and ideas run loose. I used to think my ideas were crazy but after watching you, lol hell I'm normal. So thanks for releasing the Cracking! Take care my friend and say hello to your beautiful wife for me. Y'all take care from Gonzales Louisiana
A manufacturing genius. It's nice to see the progress of the project. Thank you for the video.
Agreed, Chad is a genius
Loved your comment on Jolene's taping skills and how proud Jim would be to see how little tape she used. You said it would probably bring Jim to tears. Love the show and Fina.
LS motor seems less intimidating after the wiring video. Chad keeps it simple and understandable. Thanks Chad and Jolene!
The kid seams to know what's going on with the engine.
On m q
Creativity is its own reward. Always a rewarding show.
Wow!! Bad Chad and Jolene, I've been watching your vidios for months almost daily, to see your enthusiasm and work is down to earth,, and to see your viewers into it, great follower's and comments
I went out and bought a welder Sunday because of you. And because of you it's a Lincoln. It's the 140HD Weld Pak Once it pays me back I'm going to look closer at getting that plasma cutter.
ALRIGHTY WELCOME BACK! I LOVE WATCHING THESE TWO WORK TOGETHER WHILE CHAD CREATES HIS ART STEP BY STEP!
Thank you for keeping it simple you make it very easy to follow along and I like that.
Good day HILTZ MOTOR CO. Love to watch Chad fabricate he makes it look easy..
Amazing ... absolutely amazing ! ... I would have had no idea how to do this !!! ... But now I do ! ... Thanks Chad and Jolene !
Thanks for letting us look over your shoulder while you work... I am always amazed how you make it all look so easy
It's always amazing watching you build something from scratch. That cover is going to look awesome under the hood, in between those louvers.
The joy of a shaker scoop shows how much fun cars can be.
I love how you show everything, from beginning to end
Another great metal working tutorial. Shaker hood going to look awesome. Thanks for your willingness to share your knowledge and experience
Louvers are a nice touch ! Always doing something unique!!
Amazing how Chad just lines stuff up and most times it spot on. A true Craftsman and artist. Also amazing how Jolene gets all the little stuff. Love watching.
Amazing fab work!! It's simply incredible how you take a flat piece of sheet metal and turn it into something!!
Awesome approach again.
Another way to make a complex curve without lots of hammer and dolly work and some plannishing.
I know the hood scoop is good to look great because you will make it look great 👍
This was really interesting to watch. Love watching completely fabricated pieces you made up in your mind. Thank you Chad and Jolene. Shared with a friend.
Another lesson in metalwork, love the outcome of the shaker hood, made on the fly and worked out first time, Excellent work by both of you
I have found that a “ Tailors “ tape works far better then a self rolling tape measure .
They lay nice and flat on curves . You can get them at any sewing supply store and the com in varying lengths .
I used to do Custom auto interiors, except for welding , it’s similar fabrication - no welding -lots of sewing
Yes a tailor's tape does work good
Make the passengers front window the same color as rear. I find the white distracting to the cars bueatiful lines.
I appreciate how you explain your past mistakes when telling why you do something a certain way.
Love the shaker on the trans am and the mustangs. Glad you're going that route.
me and my son watch daily. love your work.
The shaker Chad made looks better than the plastic one and can be painted. Jolene always does a fabulous job with the camera.
been wanting to learn how to do this....thank you for the visual aid and instructions
Now this is fun, the shaker hood scoop ROCKS !!!
Enjoying a Monday evening with Chad and Jolene! Thanks for the videos!
Great video watching talented tradesman working with basic tools to make his vision...awesome. Love this channel.
You do a great job on everything you do. I'm trying to save up to get a welder so that I can start on a project of my own . I have everything else and even the project so ,I'm ready to go as soon as I get it together. In the mean time I'll just keep watching and learning. Keep up the great work and God Bless you guys and your family. 💯👍👍🙏🙏✌😊✌
I knew you were going for a trans am shaker and you really got it right, great video 👍👍
Best show on TH-cam!! The engine harness video was great as well. Love the hood. Very creative.
Always fun to watch Chad take what he has and make something work and look cool. Keep doing what you're doing.
Great show Sunday and a great young man that knows his stuff
Every day I go to this show to see two people working together to complete a masterpiece, Jolene and Chad - thanks
Its nice to watch a fellow fabricator. You two are a good team.always look forward to your videos 😎
I must say…I couldn’t envision the final product of the shaker as you were piecing it together but you surprised me and pulled it off. Lookin good!
Hello Chad & Jolene, I enjoyed the video, very educational. Thanks for sharing, I may make one for my COE project.
you are fast with the welding, loved the video, learn more here than any other youtube channel ty
I like that you can see more of the motor in the engine bay by having a saker inner hood cover. Thanks Mark Dutka Oakville Ontario Canada
Love your will to fab together anything you need for your project. Great job !!
This will be very interesting to see
Best channel on TH-cam. Keep up the good work team Hiltz.
Wow!!! Really coming along nicely!
It is always very interesting to see pieces of sheet metal molded to create something beautiful.
Great job guys. 😎👍
Greetings from Switzerland
Looking great ,another masterpiece gets completed,great job of both of you again,thanks for sharing
I love the idea of a shaker hood on Elvis. I have an LS in my truck and I want to do that to it.
Always loved ths shaker hood scoops
Glad to see you’re making a shaker/cover rather than using the plastic one. 👌
Your talents amazes me it's a pleasure to see you work
The car is coming along great, you are doing an amazing job walking through your process. Thank you for the great insite
You are an absolute amazing artistic car guy! Love watching your videos and seeing how you create everything!
Fabrication videos are the greatest👍
The Engine tutorial was informative. That young man knows his stuff. Thanks Chad and Jolene.
bad chad, the duke of cool, the billy idol of custom car's, keep's up the great work's man.
Long video but so much interesting content!! I’m going to use this for sure!
It still amazes me that you know exactly where to cut. Great job.
Nice Fabrication Chad. Nice workbench, my knees aren’t nearly as sore watching you work on your bench. Love the closeups Jolene
Looking good! Can’t wait to watch the wiring install and computer set-up. Thank you both for sharing.
Hats Off to Hiltz Auto co.✨🏆✨..Always Much Respect For everything You make come to alive.. 👊😎...Got to Grind to shine .
Excellent fabrication work... ✌🇬🇧
Luv the outcome of the dhaker hood ... will look amazing under the hood
My husband really enjoyed you making your shaker hood great job you guys. 👍😎
I've watched ever so many of your videos Chad, and have to say this one was most informative! At the beginning I was thinking how the hell is he gonna make all those curves ? .... You killed it Chad !!!
was going to suggest doing pie cuts on corners but you the man you figured it out
Look like a good start on the shaker, can’t wait to see it finished 👍
GID DAY Chad & Jolene wasn't Dane so full of very good information yesterday, he is one very nice man i hope we do see more of him in the near future..
Master fabrication and well filmed
It's fascinating to watch how bends are made. Jolene follows each step like a professional so we can see each move Chad makes. Whatta team!!!!!
enjoy watching the progress.
it is great that chad shows us every step in the process of what he does
U 1 of the best around and of time. Seen a lot of welders and fabricators pretty dang good sir but our gen work is our zin
Good evening jolene and chad hope your having a great Monday also thank you for sharing your journey also congratulations to last week’s winners
Shaker time!!! on Air!! Love to watch as it happens in real time...thank you!
I’m making mine just like you if I ever get to it thanks for all the lessons you teach 👍
Elvis is in the building. Keep up the great work. You inspire me every day.
You are an amazing artist bad Chad🤔. For never making something like that before and figuring it all out right in front of our eyes in just over an hour is amazing to me !! I learned so much from this channel it’s amazing 🤩 🥇🥇
Just catching up on your videos and man you are a wizard with that sheet metal. I don't know if you have ever heard of being in a "flow state" but man you are there when you are working on that metal.
Keep the videos coming. I really need to get working on my 1965 Barracuda
So much great content everyday!! I like how you just go for it!!
The shaker is going to look good Chad you make it look easy to make one thank you for the great videos elvis is really going to be king of your cars with the color you chose its fit for a king
Awesome job you're doing on this car
Another creation by Bad Chad- Looking good. Glad your enjoying creating. Keep up your creativity. Enjoy your show.
Keep up the good work guys. Love watching each day
Fabrication is just the best!
The Shaker scoop looks great!
Dane done a great job yesterday on the LS swap , good information
thanks ,you give me the confidence to try it.
Absolute fabrication work Chad. Awesome video Work Jolene
Chad is brand new to the LS scene but already doing things that i haven't seen others do to the LS. The shaker hood is going to come out great!!!
You have mad skills Chady. I can't wait to see your creations.
I do collision repair much respect fabricating is not as easy a you make it look. Nice job..
I love the longer videos. Thank you Chad and Jolene. The extra stuff in Facebook is awesome. Jolene saved Chad a lot of tape lol. Jim would be happy