Je to šrot strielat je ztoho nebezpečne nestoji to za to skoea casu a energie dnes sa daju kupit lugere fungl nove originalne zo starych NZ skladov za prijatelne ceny
EXACTLY! He buys these old badly damaged and broken gun super cheap, he beats them a bit on a lathe, and then rusts them himself. You can tell because ALL of his guns have the same patina. Go use translate the Cyrillic comments on the Makarov video and they explain how this being done: This guy buys old broken guns in the cheap, beats them up a bit to try to emulate additional pitting - with obvious lathe marks, and then synthetically rusts them - and he uses the same resulting technique on all, clearly. Thus a simple catalytic bath restores it 99% to the conditin it is when he bought it. This not the condition the base metal metal when be in with this amount of oxidation. Complete fraud.
Don't reset this educational video either. I'm someone who just can't seem to move on if you do that. Since I'm someone who sees other old-timer guns getting restored. No need to see things more than once.
Watched few videos. This should be called “collection preservation” or something. Definitely not “restoration”, as nothing was restored. I admire the effort though. The skill and sheer amount of work you put into it is impressive. Personally I would prefer if you just leave it bare steel so I can hang one on the wall as decor. If you do want to blue it, why don’t wear it up afterwards - that will make it look real battle worn.
He buys them cheap and broken, beats them a bit on a lathe, and then rusts them himself. You can tell because ALL of his guns have the same patina. Go use translate the Cyrillic comments on the Makarov video and they explain how this being done: This guy buys old broken guns in the cheap, beats them up a bit to try to emulate additional pitting - with obvious lathe marks, and then synthetically rusts them - and he uses the same resulting technique on all, clearly. Thus a simple catalytic bath restores it 99% to the conditin it is when he bought it. This not the condition the base metal metal when be in with this amount of oxidation. Complete fraud.
the work of reconstructing the corroded steel is admirable, but precisely for this reason the lack of care for the rest, the trigger guard, the trigger itself, bolt and extractor, muzzle of the barrel, safety, disassembly lever and knurling of the bolt are perplexing they pity, and kill all the work done before, much more difficult. Are you bored? keep in mind that even the stock finish of the worst lugers was fantastic, if you restore it these things have to be taken care of.
Don't forget, most of these restorations are functionally dead on arrival. At least now they can be used as training aids or display pieces. Good job. I wouldn't want to fire any of them, unless you wanted to start a youtube channel on building your own prosthetic fingers.
He buys broken damaged guns, rusts them with the same chemicals every time (the same exact patina on all), and then "restores" them. Go use translate the Cyrillic comments on the Makarov video and they explain how this being done: This guy buys old broken guns in the cheap, beats them up a bit to try to emulate additional pitting - with obvious lathe marks, and then synthetically rusts them - and he uses the same resulting technique on all, clearly. Thus a simple catalytic bath restores it 99% to the conditin it is when he bought it. This not the condition the base metal metal when be in with this amount of oxidation. Complete fraud.
Sometimes relics should be left alone. Now it looks horrible.
Frankenstein's Luger.
Hahahaha right,
Exellent,👍
Love your videos
Люгер Парабелум легенда Р-08👍👍💪👏
Looks like a 3D print gun 🤣 nice work 💪🏻😎
Did any of us ask
Man the end gave me n64 007 vibes
Execelente reparación, es como escuchar asmr pero con reparaciones.
Для макета сойдет.А так,профанация а не реставрация.
that Luger been in bits be for not much rust on it or the gun looks like crap
Do not use mig . Tig only.
👍👍👍
I want to watch a new AK-47 renewal clip
You can watch the old one again:D Anyway they are doing the same stuff from one video to another 😅
Can it shoot?
No
someone buy him hand files
Je to šrot strielat je ztoho nebezpečne nestoji to za to skoea casu a energie dnes sa daju kupit lugere fungl nove originalne zo starych NZ skladov za prijatelne ceny
После реставрации вещь обязательно нужно хромировать
Is it official rule for restoration? Hmm
После такой лучше выкинуть
@@ГеннадийАлейник-д7ц or hang on your wall, it's definitely not a gun for use anymore
@@ГеннадийАлейник-д7ц данная вещь конечно реставрации не подлежит.
Столько труда и всё псу под хвост.😢
Good God how are you going to fix that
Fake restoration
EXACTLY!
He buys these old badly damaged and broken gun super cheap, he beats them a bit on a lathe, and then rusts them himself. You can tell because ALL of his guns have the same patina.
Go use translate the Cyrillic comments on the Makarov video and they explain how this being done:
This guy buys old broken guns in the cheap, beats them up a bit to try to emulate additional pitting - with obvious lathe marks, and then synthetically rusts them - and he uses the same resulting technique on all, clearly.
Thus a simple catalytic bath restores it 99% to the conditin it is when he bought it. This not the condition the base metal metal when be in with this amount of oxidation. Complete fraud.
Es war eine wunderbare Pistole, sowohl zu ihrer Zeit als auch heute
now go and shoot that paperweight and watch it blow up in your hand.🔥🔥🔥
8:49 😂😂😂😂😂
Too short:D i want a full parody😅😅😅😅
Absolutely love your videos great job 🙂 question we’re do you get your guns for restoration?
As far as ive seen in the description under one of his vids, people send him stuff to restore. Idk if its truth though
@@Irusssska dann ist das Niveau des Meisters wahrscheinlich sehr hoch, vielleicht, wenn nicht Houdini, dann sein Schüler?
@@Alex_Tisse he knows what he's doing for sure 😮 excellent job
@@RHGzxc Nach den Aktionen zu urteilen, stimme ich Ihnen wahrscheinlich zu
Don't reset this educational video either. I'm someone who just can't seem to move on if you do that. Since I'm someone who sees other old-timer guns getting restored. No need to see things more than once.
Watched few videos. This should be called “collection preservation” or something. Definitely not “restoration”, as nothing was restored. I admire the effort though. The skill and sheer amount of work you put into it is impressive. Personally I would prefer if you just leave it bare steel so I can hang one on the wall as decor. If you do want to blue it, why don’t wear it up afterwards - that will make it look real battle worn.
i will try this,vut i have no rusty gun ,who is possible find?
kinda looks ass at the end
if that was a real Luger you not have it you sold it as fast as you got it fake
Ida Sheaffer Bellumat
Sdd vó
The length of grinding and sanding, this pistol is trash
Houdini, is that you?)))
Harry😍
4:24 one of the best shots
hey man Where and where do you find these weapons to restore you do very well restoring very old weapons
A maioria eles recolhem das trincheiras da ww2.
He buys them cheap and broken, beats them a bit on a lathe, and then rusts them himself. You can tell because ALL of his guns have the same patina.
Go use translate the Cyrillic comments on the Makarov video and they explain how this being done:
This guy buys old broken guns in the cheap, beats them up a bit to try to emulate additional pitting - with obvious lathe marks, and then synthetically rusts them - and he uses the same resulting technique on all, clearly.
Thus a simple catalytic bath restores it 99% to the conditin it is when he bought it. This not the condition the base metal metal when be in with this amount of oxidation. Complete fraud.
Not really good, piece of scrapmetal.
Ficou muito bom!👏🏼👍🏼
good restore👍👍
6:19 flash allert :D
😊
Katastrophe....😮
Why?🤔
If you are talking about this gun before restoraation - i agree :D
@@RHGzxc i think its about after the restoration😂
@@Irusssska but looks great, no? I mean it's not perfect, but if you see what they had and what they've got, thats a huge difference
You made it worse
Il aurait mérité une restauration plus pouce
Over-engineered...
the work of reconstructing the corroded steel is admirable, but precisely for this reason the lack of care for the rest, the trigger guard, the trigger itself, bolt and extractor, muzzle of the barrel, safety, disassembly lever and knurling of the bolt are perplexing they pity, and kill all the work done before, much more difficult. Are you bored? keep in mind that even the stock finish of the worst lugers was fantastic, if you restore it these things have to be taken care of.
Man you sound like you know what you're doing. Can we get a link to your video of you restoring a luger? Or anything for that matter?
and what about the knurling, it feels like they tried to unscrew it with pliers?
*You guys have done the impossible!*
Изначально он был очищен с помощью электролиза, но это не показали...
firs time no electrolysis in their video lol you are right :/
Ich rate Ihnen, den Gasversorgungsschlauch auszutauschen, der alte hat bereits funktioniert
It looks good...but are the tolerances ok and is the strength of the parts sufficient still?
They don’t care, they’ll never actually use the gun. Just did this for the views.
good job
Can i buy this one? Id love to have it in my collection 😍
500$ only
ルガー？
Awesome!
Я хочу потому убила школу 3:12
What do you mean? Should we worry?😮
good job!
Круто
Looks like somebody got a sponsor
Sponsor,y?
Okay I see how you do it now you just gave the gun herpes lol
“It’s perfect”
Ikr?
Will it Fires?😊
No
Nice restoration. 👍👍. You did a great work.
Awesome
So satisfying ❤
Don't forget, most of these restorations are functionally dead on arrival. At least now they can be used as training aids or display pieces. Good job. I wouldn't want to fire any of them, unless you wanted to start a youtube channel on building your own prosthetic fingers.
He buys broken damaged guns, rusts them with the same chemicals every time (the same exact patina on all), and then "restores" them.
Go use translate the Cyrillic comments on the Makarov video and they explain how this being done:
This guy buys old broken guns in the cheap, beats them up a bit to try to emulate additional pitting - with obvious lathe marks, and then synthetically rusts them - and he uses the same resulting technique on all, clearly.
Thus a simple catalytic bath restores it 99% to the conditin it is when he bought it. This not the condition the base metal metal when be in with this amount of oxidation. Complete fraud.
You would think this guy would at least have a bench grinder with a wire bristle wheel?
Fake, pistolet déjà nettoyé et démonté en amont.. Remontage et oxydation de surface😠
Fake? I see a corrosion under the rust, how can it be fake?
I am wondering when it will be a day without "fake" in comments :D
@@RHGzxc idk , usually i yell fake but not on this one, cause it looked like sh..t before the restoration😂
@@Irusssska it always looks like sh*t before restoration :D maybe you've got tired of doing the same again and again?:D
@@Irusssska also why still watch channel if you think everything here is fake?