Good video but its awesome to see that you answer all the questions in the comments section. I've never seen that before, this really helps people and improves your channel a lot. Thanks!
Do I need to prepare the Switch in any other way, or I can just follow your steps here? 1- Make sure the right files are on the RCM Loader 2- Boot software on Switch 3- Completely turn off Switch 4- Insert Jig 5- Set RCM Loader to proper setting (Blue Light) 6- Enter RCM Mode
Hey silly question but I don't have joy con's atm but I do have a wireless controller. Do I need the left joycon plugged in or can I just use touchscreen?
@@allaboutswitch9499which payload do you inject? i’m stuck in autorcm and switch isn’t booting. tried injecting hikate file but just tells me it’s already injected and i’m overwriting it. If i proceed anyways it gets stuck and stops responding. Any ideas or tips?
Hey, Just a question, does the RCM loader let you download any software onto the switch (Something like citra played running on switch). Can it also install mods for different games. Thanks!
hey could use your help. my switch is stuck in autorcm from when I was messing around in hakate. Ik u have to manually boot it back up with a pc with autorcm but I can’t get the payload to inject properly. I try to inject the hikate payload but tegrarcm just says i’m overwriting it and when i proceed it stops responding. Any tips or ideas?
this is coming quite handy. I doubt I can bring my laptop from USA to Japan for a visit family. and I need to at least bring something for entertainment that is handy. switch is my choice. perhaps I should grab rcm loader when I'm traveling that my pc is not there.
Do u need to do these everytime u need to boot in cfw? I mean, I usually turn off my console when I'm going to work and turn it back on when I got home. I'm wondering if I boot up, what os will be opened, stock or cfw
Okay, so everything is working find until I see the Launch buttons. I choose launch just like you did but when I choose Launch I don't see anything inside. What did I miss?
Your nintendo switch must be version 1 And eligible for cfw Put rcm rig jig Turn off you switch Put rcm loader to usb slot Enter rcm mode like my video
Hello, how do i contact you? i have several problems. So I just accidentally updated my Switch and suddenly my Switch cannot work properly. I need your help, I used a same RCM loader and using Hakate
Hey, I have a problem with my Rcm Loader. Why can't I choose between directories? Only one led works for me. Previously, I had a choice of probably 5 different catalogs, and the colors of the LEDs were changing
Hey, I could need your help I injected my rcm loader to the switch, held volume up & power button but nothing appeared. Now the rcm loader is lighting blue constantly, I can’t even connect it to my pc
Is your switch eligible for cfw ? If yes. Try to connect rcm loader to your pc. It should be like usb drive. How to inject payload. - turn off switch - put rcm jig. - press vol up and power to enter rcm mode - plug rcm loader on usb c port
I got the blue light when pushing volume up and power, but then nothing happens. I've updated my rcm loader (v2.02), I've prepared my SD card via SDsetup... I don't understand... Any help there ?
You can read readme.txt on rcm loader There is explanation about light and which folder payload will be use. Payload on rcm must be named. With “payload.bin” If you want to inject the payload Put rcm jig and right side controler Plug rcm loader into usb c port Press “vol up + power”
Hey, question everything worked like a charm using this.. but how do i install the training mod pack? do i just put it on the sd card or do i have to inject it with the rcm loader?
you say its for nintendo switch v1 un patched, but i seen its for all models made before 2019, i have a v1 pached version HAC-001 I just orderd the loader so hope it works.
is there any prerequisite, when I use RCM using Vol up & power button, I see still selected firmware light on device but nintendo doesn't boots up, anything I am missing?
Please make sure that your switch v1. And eligible for cfw Place rig jic on slide right joycon. Press power and volume up at same time. There is no sign when enter rcm mode. ( blank screen ) It will detect when connect with tegra gui. If your switch on rcm mode or note
hey when i plug my injector into my pc no files show up and i want to use this for portability. The rcm jig works fine but the injector dosent work. Would you know how to fix this?
Do you mean like , if when we shutdown or switch go to shutdown when battery empty ? In that condition we have to inject payload again to enter cfw. Because its back to official firmware
Please check, is your switch eligible for cfw. If eligible - check switch firmware is it match with payload that already copy on rcm loader - check about light on rcm loader is it on right folder
Hi I bought a RCM loader on Aliexpress (type B). (i added a picture in attachement) I connected it to my PC (through the usb-cable), and i wiped out all the data that was on the RCM loader... Stupid me... (the maps and all the files)
Rcm loader just tool to jailbreak n switch easier. With out using pc. You can use pc to do so. By using tegragui. Atmosphere is for jailbreak n switch. When n switch turn off. N switch will be back to normal switch
@@allaboutswitch9499 I have a question can I use this one on the switch www.amazon.com/Owltree-Connector-Nintendo-Recovery-Simulator/dp/B08YRS8X15/ref=mp_s_a_1_5?dchild=1&keywords=rcm+jig+for+nintendo+switch&qid=1627345446&sprefix=rcm+jig&sr=8-5
This only work with nintendo switch v1 and unpatched. If you bought switch on 2020 it will be v2. And can not use this method. You have to use mod chip.
So I followed the video and After I updated the files and injected the firmware I got an error messages saying that I to update the bootloader folder. Any Ideas what went wrong. It is already modded I just want to get the CFW to load.
Theres a light that indicate payload that you are using. On rcm loader when you connected to pc. There is some folder like atmosphere etc.rename and replace payload with same name with default.
@@allaboutswitch9499 its working somehow .. I followed your steps and I reach when i suppose to press the power button with the volume up but nothing is happened
Please check is you switch is v1 and unpatched. After that insert rig jig rcm into tray right joycon Then insert rcm loader and press power and vol up button
Hey man I could use your help, I deleted all the unnecessary files that I didn’t need and it did work so that’s not the issue however I can’t get my rcm loader to stay on the color I want. The only payloads I have is hetake (blue) and fusee (green). Before deleting all the files I could only swap the colors if it was plugged into my switch and the white light was on and even then it never 100 percent stayed on the color I wanted but now It only stays on blue. Why can you change your color without having it plugged in and I can’t?
basically what he's saying is unless you got so lucky you SOMEHOW got a switch that was from all the way when the console first launched even after all the shortages and stuff it probably won't work since they patched out the exploit in the present switches
Hi was wondering if anyone could help, I’m very new to this, was mainly wanted to mod/jailbreak to get the Pokémon switch save files. The homebrew one seems a long process , is this rcm loader gonna make it easier for me to mod for a beginner like me ? I still wanna go online sometimes and all, 🙏🏻
If you want to play online You can use emunand If you want to play online you can use OFW If you want to play offline CFW you can inject payload using rcm loader
Payload is on folder bootloader. There is fuseprimary.bin for atmosphere. Fuse primary.bin it depend which cfw you are using. If you using 10.4.1 then you have to look for fuse primary.bin for that version
@@allaboutswitch9499 thank you is there anyway you can make a video on how to do this with the lates version 11.0.1 with the rcm loader without the tegra?
This is only for switch v1 and unpatched. Yes this still work with 9.x. By using payload for that version Different betwen newest firmware is on loading game speed and controller update and you can play newest games
I had one question though. I just realized that when after using the rcmloader1 and inside the cfw, the firmware is updated. But if I go back to normal (power off then normal boot) the firmware is still the same 9.1
Yes it is. Because you are using emunand When you turn on to normal to official firmware Your system will be at 9.xx You can update your system to newest if you want to play online
If your switch version 2. You have to use mod chip. But if your switch v1. You can check switch serial number on ismyswitchpatched.com. Is it eligible for cfw or not
@@allaboutswitch9499hey when i plug my injector into my pc no files show up and i want to use this for portability the rcm jig works fine if i plug it into my pc but the injector dosent work.
bought this a few months back and finally got to using it. the video still worked for me thanks!
Great 🙂
im new at this and want to buy one but does this load nintendo switch games or does it only load retro games that you get from a web site
This device only for inject payload for nintendo switch unpatched only. V1 or mariko
@@allaboutswitch9499 mines says at back of it (HAC-001) 32GB year 2020 does that mean it will work
You can check on web ismyswitchpatched.com/
By enter your serial number
Good video but its awesome to see that you answer all the questions in the comments section. I've never seen that before, this really helps people and improves your channel a lot. Thanks!
Thank you for your support
Thanks for this quick tutorial man. Straight forward and easy to understand.
Thank you 🙏🙏🙏
Create video, fast n informal
Thanks for the video! I'm glad you showed how to switch payloads. Mine kept trying to inject the green one at first :)
Your welcome
Watching this even though my switch is patch..😔
If your switch patch. You can use mod chip
Do I need to prepare the Switch in any other way, or I can just follow your steps here?
1- Make sure the right files are on the RCM Loader
2- Boot software on Switch
3- Completely turn off Switch
4- Insert Jig
5- Set RCM Loader to proper setting (Blue Light)
6- Enter RCM Mode
Correct.
(5) - if you use another folder on rcm loader it will be different light colour.
Read description on rcmloader.
NOW i like tutorials without sounds.
Thanks, dude.
Great
so using the rcm loader i can skip the process of usb connecting my switch to pc?
Yes. You can skip that process
my screen stays black when I plug the thing in and go to RCM mode
Check atmosphere version and ofw.
But first check is your switch eligible for cfw
Hey silly question but I don't have joy con's atm but I do have a wireless controller. Do I need the left joycon plugged in or can I just use touchscreen?
Yes you can use touchscreen
What if i enabled auto rcm and i use rcm loader only without using the rcm jig ?
If you enable autorcm you no need using rcm jig to enter rcmmode.
Just inject payload. By using rcm loader or tegra Gui
@@allaboutswitch9499which payload do you inject? i’m stuck in autorcm and switch isn’t booting. tried injecting hikate file but just tells me it’s already injected and i’m overwriting it. If i proceed anyways it gets stuck and stops responding. Any ideas or tips?
@maltime2047 depend which system
If using hekate. You will be boot on hekate system menu. Then choose cfw that you are using now
Hey, Just a question, does the RCM loader let you download any software onto the switch (Something like citra played running on switch). Can it also install mods for different games. Thanks!
No there is no software needed for rcm loader.
Just download payload file for inject n switch
@@allaboutswitch9499 Thanks
hey could use your help. my switch is stuck in autorcm from when I was messing around in hakate. Ik u have to manually boot it back up with a pc with autorcm but I can’t get the payload to inject properly. I try to inject the hikate payload but tegrarcm just says i’m overwriting it and when i proceed it stops responding. Any tips or ideas?
My rcm loader that came in the other day is unresponsive, what should i do?
Rcmloader should charge using usb on pc.
When it charge the led will be blinking
this is coming quite handy. I doubt I can bring my laptop from USA to Japan for a visit family. and I need to at least bring something for entertainment that is handy. switch is my choice. perhaps I should grab rcm loader when I'm traveling that my pc is not there.
there is Nxloader for android, which can inject payload files
Is that payload file the fusee.bin file that you use to inject payload on PC?
Yes it is
Do u need to do these everytime u need to boot in cfw? I mean, I usually turn off my console when I'm going to work and turn it back on when I got home. I'm wondering if I boot up, what os will be opened, stock or cfw
When u boot up. It will retun to stock or ofw
Okay, so everything is working find until I see the Launch buttons. I choose launch just like you did but when I choose Launch I don't see anything inside. What did I miss?
Your nintendo switch must be version 1
And eligible for cfw
Put rcm rig jig
Turn off you switch
Put rcm loader to usb slot
Enter rcm mode like my video
Hello, how do i contact you? i have several problems. So I just accidentally updated my Switch and suddenly my Switch cannot work properly. I need your help, I used a same RCM loader and using Hakate
If you update to latest firmware. You have search hekate version that support that firmware. Just copy hekatexxx.bin to rcmloader. Then inject
Hey, I have a problem with my Rcm Loader. Why can't I choose between directories? Only one led works for me. Previously, I had a choice of probably 5 different catalogs, and the colors of the LEDs were changing
When pressing “+” about 1-2 second. The colors not changing ?
Please check directory on rcm loader. Is it same like default ?
@@allaboutswitch9499 Yes. Previously, it worked, and now it doesn't change colors. Only one is flashing
@Artur Szarek sorry, i’ve never experienced that 😅
@@allaboutswitch9499 thx
Hey, I could need your help
I injected my rcm loader to the switch, held volume up & power button but nothing appeared. Now the rcm loader is lighting blue constantly, I can’t even connect it to my pc
Do you know how I could solve this?
Is your switch eligible for cfw ?
If yes. Try to connect rcm loader to your pc. It should be like usb drive.
How to inject payload.
- turn off switch
- put rcm jig.
- press vol up and power to enter rcm mode
- plug rcm loader on usb c port
Have the same Problem!
could you solve it?!
Is your switch eligible for cfw ?
@@allaboutswitch9499 yes it worked so far.
But I am unable to block connection to nintendo via DNS.
I'm new to this. Got a 2020 model. Can I do this mod on it or does it need to be a pre-2018 model. Thanks
If your switch v2. You have to use mod chip for cfw.
I got the blue light when pushing volume up and power, but then nothing happens. I've updated my rcm loader (v2.02), I've prepared my SD card via SDsetup... I don't understand... Any help there ?
You can read readme.txt on rcm loader
There is explanation about light and which folder payload will be use.
Payload on rcm must be named. With “payload.bin”
If you want to inject the payload
Put rcm jig and right side controler
Plug rcm loader into usb c port
Press “vol up + power”
Do you have to use rcm every time that i start the console or this is a 1 time thing?
Use rcm only when your switch shutdown or run out of battery.
Is this how to homebrew the switch, or just how to launch into it after it's initially homebrewed? I'm new to switch homebrew and looking for help!
Rcm loader only short cut to get into cfw mode.
Can I start only one Switch with the RCM loader, or can I start several Switch with the same RCM? Thanks
You can use rcm loader on any nintendo switch that eligible for cfw 😊
Hey, question everything worked like a charm using this.. but how do i install the training mod pack? do i just put it on the sd card or do i have to inject it with the rcm loader?
Put training mod pack to sd card by connect sd card to pc.
Or use tinfoil connect to switch. Juat copy file.
Your switch must be start by atmosphere
@@allaboutswitch9499 cool thanks! I’m a few steps ahead now. Now I gotta find some new files to get it to work.
Great 👍
you say its for nintendo switch v1 un patched, but i seen its for all models made before 2019, i have a v1 pached version HAC-001 I just orderd the loader so hope it works.
If your switch patched. You have to use mod chip for cfw😊
is there any prerequisite, when I use RCM using Vol up & power button, I see still selected firmware light on device but nintendo doesn't boots up, anything I am missing?
Turn off you switch
Put rig jig rcm on right tray of joycon.
Put your rcm loader to usc c connector. Then
Press vol up with power button at same time
@@allaboutswitch9499 did the same but it doesn't loads up, I have V2
@Vivek Khanna this only work for switch v1 un patched. 😊
If your switch v2. You have to use mod chip
Mine doesn’t do anything when I plug it in and hold the 2 buttons down ?
Please make sure that your switch v1. And eligible for cfw
Place rig jic on slide right joycon.
Press power and volume up at same time.
There is no sign when enter rcm mode. ( blank screen )
It will detect when connect with tegra gui. If your switch on rcm mode or note
Hi does, this works on oled and v2 switch ??
V2 and oled version must use mod chip
hey when i plug my injector into my pc no files show up and i want to use this for portability. The rcm jig works fine but the injector dosent work. Would you know how to fix this?
I always charge rcm loader using pc. I never plug into charger
does it need a pc or can i use a laptop?
Need a pc or laptop just for copy payload to rcm
After copy it doesnt need pc or laptop
My rcm loader's battery must be dead it never lights up when I click on the plus button
You can charge using usb port on Pc or laptop
Hey my payload injector is stuck on one color when I hold it it only lets me select the last color
If your payload injector stuck on one color you can change file payload that relate to that color
I did everything you did in the video and keep getting missing lp0,missing old minerva lib and update bootloader folde. Any idea what i'm doing wrong?
There maybe different version of payload when you inject to your switch.
Do u know how to check which payload I should use or just use atmos
Use atmosphere is the simple way.
If you want to play online with official firmware and play cfw. You can use emunand like hekate
Im new to this, is there a way to turn the switch back to normal after you inject? or is it permanent
Its temporary
You can shutdown your switch then turn it on.
Your switch will be on normal firmware.
@@allaboutswitch9499 okay thanks for the info
Your welcome
@@allaboutswitch9499 i suppose rebooting works too? (just asking in case)
Do you mean like , if when we shutdown or switch go to shutdown when battery empty ?
In that condition we have to inject payload again to enter cfw. Because its back to official firmware
hi do i need to format my sd to fat32 cuz mine is exfat and if I do have to, can i backup my switch save files from previous games?
Yes you can.
How do I exit the rcm mode
Just shutdown your switch
If this piece enters the switch in the jailbreak mode without using the PC?
Yes without using pc
do I still need a microsd in order to install apps on the atmosphere or can I just get the rcmloader and be set?
Still need microsd
Because atmosphere file in microsd
Can you please help I put my new RCM loader in my Nintendo switch now it we'll not turn on or charge at all
Please check, is your switch eligible for cfw.
If eligible
- check switch firmware is it match with payload that already copy on rcm loader
- check about light on rcm loader is it on right folder
Am I able to use the end of my headphones cord to touch pin 9 and 10 so I can go into RCM mode?
I never try that method
Because there is rcm jig available on market. And its cheap. 😊😁
@@allaboutswitch9499 fair enough 😃 👍
Mine isn’t working it says fatal error. To Stage 2
What did I forget to do
Please make sure that your switch version is v1 and eligble for cfw.
Make sure your using correct payload. With atmosphere file or hekate file
Do I need to add any extra files to the sd card?
Yes.
You must have atmosphere file to use cfw.
Copy to root of sd card. And enter rcm mode then inject
@@allaboutswitch9499 ok I guess I know what was wrong. Thanks
question,this only works on unpatched switch?
Yes it is.
Yo. Just got my rcm loader and I'm not sure if I should put it in my switch.
Dose this allow you to use mods on non hacked switches?
This just tools for simplify injection command only.
If your switch non hack. You have to use mod chip
My RCM wont show up as a device on my PC. Any ideas?
When you connect rcmloader to pc. It will automaticly recog as usb drive
will this work on unmodded switch?
Can not.
You have to use modchip
So it is not permanent cfw. If you reboot, you are on ofw and can I play online without any risks by doing so
Yes you can play online using ofw
I recommend to use emunand cfw if you want play online using ofw
Hi I bought a RCM loader on Aliexpress (type B). (i added a picture in attachement)
I connected it to my PC (through the usb-cable), and i wiped out all the data that was on the RCM loader... Stupid me... (the maps and all the files)
Just create folder
ATMOSPHERE_HEKATE
SXOS
USER1
USER2
Does my switch have to be jailbroken before using this or this will do the jailbreaking for me?
Rcm loader just tool to jailbreak n switch easier. With out using pc.
You can use pc to do so. By using tegragui.
Atmosphere is for jailbreak n switch.
When n switch turn off.
N switch will be back to normal switch
Where do you get the Hekate Atmosphere files that you rename?
You can search on github via google 😊
@@allaboutswitch9499 where on github? Could you maybe provide a link please:)
You can search github hekate on google.
@@allaboutswitch9499 thanks:)
where can i buy this tool ?,i searched on amazon but i didnt find it.
You can search using RCM Jig. Or RCM Loader
@@allaboutswitch9499 but its not on amazon :(
On amazon i only found rcm jig. 😊
@@allaboutswitch9499 yes,so where did u get the loader ?,i wanna buy it too.
I bought it on amazon 😊
Maybe you can find on another store.
is it best to use a brand new sdhc memory card or can it be the main one be fine to use
Saved games are locate on sdhc memory.
You dont need to use brand new.
You can back up to pc first before do this method.
@@allaboutswitch9499 well do. I had this for so long and finally going to set up later today
@@allaboutswitch9499 another thing. how should I fit the game size since I have only 128gb and nearly full
You have to remove or uninstall another games to get free storage. Other wise you should use new sdh. Memory
My rcm loader doesn’t have to atmosphere_hekate and the other payloads any help would be nice
On rcm loader there some folder
Each folder present blue or red color or etc on rcm loader
Where can I buy this from on amazon?
Maybe you can find on aliexpress or alibaba
Do i need the RCM tool or can i simply do it with an adapter?
You have to option
1. Use rcm rigjig + with tegra
2. Use rcm rigjig + with injector tool
@@allaboutswitch9499 I have a question can I use this one on the switch www.amazon.com/Owltree-Connector-Nintendo-Recovery-Simulator/dp/B08YRS8X15/ref=mp_s_a_1_5?dchild=1&keywords=rcm+jig+for+nintendo+switch&qid=1627345446&sprefix=rcm+jig&sr=8-5
That is rcm jig.
Before you buy 1 of that.
First check if your seitch eligible for cfw. 😊
@@allaboutswitch9499 alright 👍🏾😄
When was this released? In october 2020?or could you buy it inn2019?
I bought it on 2020.
Where can i buy that?
You can find at aliexpress
@@allaboutswitch9499 ok thanks
Hi, is it possible with all nintedo switch or not, i have bought this year 2020, is it working or just with before July 2018??
Tks
This only work with nintendo switch v1 and unpatched.
If you bought switch on 2020 it will be v2. And can not use this method. You have to use mod chip.
Is this exactly like the Team Xecuter Dongle?
Similar.
Why isnt my rcm loaders light turning on even if i long press?
Please try connect to your pc for charging.
@@allaboutswitch9499 i did it also it slowly blinks white just like how charge it in a power outlet how long should i charge in in my pc?
I think 30mnt more than enough
So I followed the video and After I updated the files and injected the firmware I got an error messages saying that I to update the bootloader folder. Any Ideas what went wrong. It is already modded I just want to get the CFW to load.
Theres a light that indicate payload that you are using.
On rcm loader when you connected to pc.
There is some folder like atmosphere etc.rename and replace payload with same name with default.
Hey I have a few questions about the rcmloader, would it be okay if I asked them?
Its okay.
Rcmloader just tool for inject payload.
If you doesnt have rcmloader. You can use tegragui and rcm jig to inject payload
So are there different rcm loaders that only work with certain versions of the switch, or can I use any kind of rcm loader
Rcm loader only work on switch that eligible for cfw.
Do I need to do this every time I want to use the cfw?
No need.
It only need when switch restart or run out of battery
Sorry but the windows cannot recognize the adapter .. any solution ???
When you plug adapter to pc or laptop is it charging ?
@@allaboutswitch9499 its working somehow .. I followed your steps and I reach when i suppose to press the power button with the volume up but nothing is happened
Please check is you switch is v1 and unpatched.
After that insert rig jig rcm into tray right joycon
Then insert rcm loader and press power and vol up button
Hey man I could use your help, I deleted all the unnecessary files that I didn’t need and it did work so that’s not the issue however I can’t get my rcm loader to stay on the color I want. The only payloads I have is hetake (blue) and fusee (green). Before deleting all the files I could only swap the colors if it was plugged into my switch and the white light was on and even then it never 100 percent stayed on the color I wanted but now It only stays on blue. Why can you change your color without having it plugged in and I can’t?
We need default directory to change payload by press “+”
Please try to restore default directory
@@allaboutswitch9499 how can I restore default? Be resetting with the pin holes?
I will open my rcm loader. Then let you know.
Atmosphere_hekate
Reinx
Sxos
User1
User2
User3
To je najboljši video doslej
Do I need to do this everytime I start my switch?
No need.
If your switch shutdown or run out of battery you need to reinject payload
@@allaboutswitch9499 I mean I do have to shutdown my switch after playing don't I?
You dont have to shutdown your switch.
Just press power button once to put your switch to sleep mode
When I plug it in it’s red what does it mean
Rcmloader have 4 light.
It indicates which payload currently use
Are there files that I can load with Macbook Pro?
Yes you can.
But you cant change partition tipe.
I bought my switch today, Does it still work with the latest version of the switch?
Your switch must be v1 and unpatced
basically what he's saying is unless you got so lucky you SOMEHOW got a switch that was from all the way when the console first launched even after all the shortages and stuff it probably won't work since they patched out the exploit in the present switches
@@LuigiLament is there a way to jailbreak a patched switch?
You have to use mod chip
@@proot174 use a mod chip, although there might be other exploits that let you but im not sure, if it requires rcm it won't work
Do you still need a sd card with the method
Yes. You need sd card on your switch with file cfw on it
Hey I got my rcmpayloader to go to one of the user profiles but can’t get it to go back to the original now lol
I just buy a Nintendo switch,can i use this to jailbreak my console?
Please check if your switch patch or unpatch
( can jailbreak or not )
If it unpatch you can jailbreak by this method.
@allaboutswitch9499 i can but it's V2 and i need tu use a chip just like Oled version if i understand correctly
Yes it is
when I press the + button, all leds flash pretty fast and it turns off. what is this? lol
@thaisbrollo which leds flash ? Lol.
Hi was wondering if anyone could help, I’m very new to this, was mainly wanted to mod/jailbreak to get the Pokémon switch save files. The homebrew one seems a long process , is this rcm loader gonna make it easier for me to mod for a beginner like me ? I still wanna go online sometimes and all, 🙏🏻
If you want to play online
You can use emunand
If you want to play online you can use OFW
If you want to play offline CFW you can inject payload using rcm loader
Does this work with the Nintendo switch OLED?
Sorry , this only work with n switch v1 anda maroko
@@allaboutswitch9499 do I need a rcm loader if I have a nitnedo switch OLED with modded chip?
Switch oled. You have to use mod chip.
When you using mod chip , no need rcmloader and this method anymore
@@allaboutswitch9499 ok so if I have mod chip already installed I just need to put atmosphere and Hekate files into an SD card?
Yes it is :)
hello when i'm in hekate mode and go to launch and it says CFW (emmumc) and when i start it it says error
Which hekate are you using right now. ?
When you run hekate and atmosphere.
Please check you fuse primary.bin. Is it right version
I have the same problem
I don’t know how to check the fuse primary bin or where to get it
@@allaboutswitch9499 can you help I’m trying to figure it out
Payload is on folder bootloader.
There is fuseprimary.bin for atmosphere.
Fuse primary.bin it depend which cfw you are using.
If you using 10.4.1 then you have to look for fuse primary.bin for that version
my switch keeps booting up in default mode
Please check if your switch eligible for cfw ?
@@allaboutswitch9499 how do i check
if you mean to see if its modable it is
You can check on ismyswitchpatched.com/
Will this work for patched versions of nintendo switch?
This not work with patched nintendo switch
You have to use modchip
I accidentally deleted the files that were on the RCMLoader that came with it is there anyway i can get those back?
Yes, just go to RCMLoader site and all the sites of the homebrew and download the latest one.
@@TheHitmanSF thanks when i plus in the rcm and and put it in rcm i get a message saying missing lpo (sleep mode) what’s that?
Maybe your payload file incorrect version
@@allaboutswitch9499 thank you is there anyway you can make a video on how to do this with the lates version 11.0.1 with the rcm loader without the tegra?
The different only when inject the payload only.
You can copy payload to your rcm.
Then inject with rcm load
Switch is still on 9.X would this still work? Is there a reason for or against updating to 11.x before utilizing this?
This is only for switch v1 and unpatched.
Yes this still work with 9.x. By using payload for that version
Different betwen newest firmware is on loading game speed and controller update and you can play newest games
@All About Switch Yes that’s what I have. I figured it out and updated to 10.2 for now with atms 16. Thanks
Great 😊
I had one question though. I just realized that when after using the rcmloader1 and inside the cfw, the firmware is updated. But if I go back to normal (power off then normal boot) the firmware is still the same 9.1
Yes it is.
Because you are using emunand
When you turn on to normal to official firmware
Your system will be at 9.xx
You can update your system to newest if you want to play online
when i use this i get a blank screen
Please check if you cfw version same with payload version
If cfw version same with payload and blank screen issue
Go to atmosphere folder
Delete contents folder
Would’ve left a like if you put an Amazon link… :]
You can find on any online store.
Maybe aliexpress or alibaba will be easier to find
How did you get the updated version of hekate?
You can search at google on github
I bay in januar my switch can i do it?
If your switch version 2. You have to use mod chip.
But if your switch v1. You can check switch serial number on ismyswitchpatched.com. Is it eligible for cfw or not
Can this work on switch lite and switch v2?
This can not work with switch lite and v2.
You have to use mod chip 😊
@@allaboutswitch9499 so we can use RCM on v1 without any chips?
You can verify your nintento switch serial number on ismyswitchpatched.com
To see if your switch is eligible for cfw.
where can i find the firmware update for the RCM loader
You can search on google for payload file that you needed 😊
will nsp and xci files work with this
This only for n switch v1 unpatched
Sir does this work with an patched NS?
Sorry can not.
You can use sx core for cfw.
How do u get out of the jailbreak mode and go back to the normal mode?
Just shutdown your switch then turn it on again
@@allaboutswitch9499 thx and this might sound dumb how do i charge the rcm loader?
Just plug usb to pc
@@allaboutswitch9499k thanks im saying this because when i got this i plugged it into my pc and nothing showed up so i think it needs a charge
@@allaboutswitch9499hey when i plug my injector into my pc no files show up and i want to use this for portability the rcm jig works fine if i plug it into my pc but the injector dosent work.
could use their YT audio library
please reupload the audio version as unlisted and put a link i'm sure youtube can't remove that
I will try on next video 😄 thank you
You have modchip??
Sorry i dont have 😊
Where is the emummc folder
Emummc only when you inject payload with hekate
From where ican get the file?
Which file you need ?