one thing I did do was perfectly center the speaker, then put four dabs of hot glue on the speaker and mount to hold it in place when drilled the 4 holes for mounting the speaker to the mount. that helped to keep the speaker from moving when drilling the holes.
adapters ... I was thinking for wiring; assuming female spade connectors ... this was not what I was expecting and if I need to, will follow this guide, thanks for putting it up! ;)
@@superdelsol I guess my main issue is wondering if the screws that came with my speakers are too big and will crack the bracket but thanks for the reply
note the video did not talk about hooking up the wires, and when putting the door back in you need to watch out to make sure the door lock push pull tab goes in the hole correctly, it is a bit hard getting it thru. other than that I had no problems following the video.
ps: the project took me 2.5 hours (first time I ever installed speakers) for both front door speakers. the dremel 4000 I bought was the perfect tool for cutting out the old speaker.
Daniel Reverter technically yes. There are harnesses you can get to keep the factory connectors. But I didn't waste my money. I just snipped the wires and put on some connectors on. Then put it on the speaker
I didn't have to even snip wires...if you look closely at the connectors on speaker wires..the looked like they were hinged...so I figured I'd have to cut anyway so I played around...if you open them hinges..them connecters will pull right out of the white incasement plug.and there you have stock wires that plug right up... I did take neednose pliers and barely pinched each connecter take make a nice tight connection
"i put my new radio on and it was easy ... but i forgot to change the speakers" you are a liar. you needed an introduction to the video - but you DID NOT forgot to change the speakers - since they are in a totally different place.
Thanks for posting. This really got my speakers installed. Crutchfield included a usless mounting kit, your video works.
Excellent video! Very straight forward for someone like me doing all of this for the first time. Great job!
one thing I did do was perfectly center the speaker, then put four dabs of hot glue on the speaker and mount to hold it in place when drilled the 4 holes for mounting the speaker to the mount. that helped to keep the speaker from moving when drilling the holes.
bro thank you so much you saved me a bunch of money
Damn. The one thing that would have finished this video off.... wire colors..... good video, it helped. Thx
Do you know how to get the information on how figure out out what is neg. & pos. On the off the wall colored wires
Gracias amigo no sabia que hacer. Saludos desde guatemala. Thanks man i didnt know what to do.
been looking for adapters for the front everywhere, thanks
Based af no problem!
2004 EX to be precise 😂 thank you for the video
adapters ... I was thinking for wiring; assuming female spade connectors ... this was not what I was expecting and if I need to, will follow this guide, thanks for putting it up! ;)
Straight to the point, Thank you.
now that's a weird way for honda to install a speaker. Nice little hack to get em in there! cheers man.
Yeah, Honda used to be a lot better about the little details like that.
superdelsol ya. cars have been changing a lot in just how easy they are to work on. i miss the older cars. things are just so easy peasy.
+paradoxdesigns 100% agree with that statement
I have 275 watts 8inch on my doors will my car be able to handle that?? It’s a civic 02
good video very informative thanks for the info ill be sure to do this to my civic
Thanks, I'm glad it could help
How tough was it to drill the holes into the bracket? That’s the part I’m having trouble with at the moment
It was easy for me, it was just plastic
@@superdelsol I guess my main issue is wondering if the screws that came with my speakers are too big and will crack the bracket but thanks for the reply
@NoLlif3 just pre drill the holes first and you shouldn't have a cracking issue
bro from where u got these door tweeters
Great video. That was a huge help!
note the video did not talk about hooking up the wires, and when putting the door back in you need to watch out to make sure the door lock push pull tab goes in the hole correctly, it is a bit hard getting it thru. other than that I had no problems following the video.
ps: the project took me 2.5 hours (first time I ever installed speakers) for both front door speakers. the dremel 4000 I bought was the perfect tool for cutting out the old speaker.
Sweet video, thanks!
Just miss to how plug the conector to the speaker....you buy a adapter conector?
No I just cut off the factory one and put on some electrical connectors
jus got my first car wich is a 05 civic and 3 speakers were busted thanks for the vid
same lol
Gotta do what ya gotta do ! Nicely done son . Now back to work on the HO monster !
+IRON MAN thanks! and yes sir, right away sir! lol
Thanks alot, I have the exact same car and all the other videos made it look tougher than it actually is
I'm glad it was able to help
Geezus..... soo much freakin' work just to replace the damn speakers. With my car it's just right there, move cover... BAM!
Tony Kart Racer yeah, my Del Sol ones are easy too. Just remove the speaker cover and done
whats the mounting depth on the front door speakers of the 01-2005 civics?
Edible Enigma I have no idea, sorry.
do you know the depth of your speakers?
Edible Enigma sorry, it was a quick install in my wife's car or stuff that was laying around for a while
to get the tweeters off do you need to remove anything else?
Brandon McELroy I don't think so
great !
did you need an adapter for the wire harness?
Daniel Reverter technically yes. There are harnesses you can get to keep the factory connectors. But I didn't waste my money. I just snipped the wires and put on some connectors on. Then put it on the speaker
I didn't have to even snip wires...if you look closely at the connectors on speaker wires..the looked like they were hinged...so I figured I'd have to cut anyway so I played around...if you open them hinges..them connecters will pull right out of the white incasement plug.and there you have stock wires that plug right up... I did take neednose pliers and barely pinched each connecter take make a nice tight connection
Nice diy
Very nice hack man impressive
Fucking magician
This speakers 16 cm?
safak kaplan 16.51 cm according to the converter I used.
Wish i wouldve watched your vid before pulling mine off. I broke all the clips....womp womp. Ill be careful pulling the passenger side
Surprise... surprise! :)
Yeah, it was a surprise, but I think I dealt with it pretty well
those are for sure 6.5 inch speakers?
slOU mOU yes
Lots of whatevers.
:)
Right on, I got a smiley from rex!
Anyway...whatever.
Cut through this video way too fucking much
"i put my new radio on and it was easy ... but i forgot to change the speakers"
you are a liar. you needed an introduction to the video - but you DID NOT forgot to change the speakers - since they are in a totally different place.