Thank you! I watched two other videos that showed four holes that were used to release four pins for air bag removal, which is what my Haynes and Chiltons show. Glad I found your video for the correct info. Liked and subscribed.
Thank you so much for this video I could not figure out how to remove the airbag on my 04 blazer and after watching this video I had it changed in a few minutes much appreciated
Dude that was very helpful I did hit the sub button I work on my own stuff and been turning a wrench form the age of 8 and some stuff I don't know and turn to utube thanks bro
Thanks for taking the time to explain the intricacies of that spring/clip/thing on the airbag. Other vids just say "ok cram this or that effin thing in there" and I bout mangled mine before I found your C L E A R (!!!) explanation.
Where can I get an open air wiring harness, like the one in this video, going from the fuse box to under the hood by way of the door jam. I've been looking everywhere!!! ;) Thanks for the video
Great video! Other videos say you should disconnect the battery when disconnecting airbags. You are the first video to show by removing the airbag fuse it will not deploy the airbag correct? Just trying to figure out which way is safer. Still great detailed video!
Great video! I have a 2009 suburban and need to remove my airbag to replace the 2 plastic pieces on each side. The small holes you talked about, do I just press inwards to release the airbag or bend?
I have Chevy Astro 2001, may i know what is the size of the steering wheel centre lock nut size? Because I’m planning to change new after market steering, Tq
I have tried and tried to get the retainer to release. No matter how much I try.(even with a little smaller flat head). It seems the connector is corroded or something. I have even used a mirror and light to make sure I was doing it properly. still no luck. Any suggestions would be greatly appreciated.
So when I take my airbag out and off the horn or plastic cover I can put the plastic cover back without the airbag? The 4x4 I drive does not have a working clockspring nor do they make them anymore hence the reason to lose what will not work on my4x4.
@@dudewecanfixit Well if you can not use the air bag anymore because the part that makes it work is no longer in production I figured one of these days to get a different steering wheel and the airbag removed before.
@@dudewecanfixit yes then replace the plastic cover till such time as I get another steering wheel. Rather not have a pit in the middle of the steering wheel with airbag and plastic missing ,just for aesthetic reasons.
I still don't understand why you are concerned with removing it. Even if it doesn't work, it's not big, heavy, or visible. That being said, I don't see why you couldn't remove it and install the plastic cover without it in place. Might even make for an interesting storage compartment
Tools used in this video
BLACK+DECKER Magnetic Screwdriver Set: amzn.to/3HnQIYM
Edward Tools Pro-Grip Needle Nose Pliers 6”: amzn.to/39jhDZg
Thank you, helped me a lot 20 minutes ago watching your video.
Thank you for the video, I was struggling at this and got it done quickly after watching. Fixed my horn!
Awesome, great job!
This needs way more likes than this this is the best one I've seen so far thanks man
I appreciate the comment, please subscribe to our channel for future videos.
Thank you! I watched two other videos that showed four holes that were used to release four pins for air bag removal, which is what my Haynes and Chiltons show. Glad I found your video for the correct info. Liked and subscribed.
Glad you got it!
You nailed it! Other videos said twist the screw driver, which didn’t work. Thanks
Nice, glad you got it!
Thank you so much for this video I could not figure out how to remove the airbag on my 04 blazer and after watching this video I had it changed in a few minutes much appreciated
I'm glad you were able to do it successfully!
Great video I needed this, I know you removed the fuse, but do I have to disconnect the battery as well
Thank you sir for the information no one never explained it fix my horn
we appreciate the feed back!
Praying for you Dillon!!!! You've been fighting for weeks you got this!!!
Thanks!
Dude that was very helpful I did hit the sub button I work on my own stuff and been turning a wrench form the age of 8 and some stuff I don't know and turn to utube thanks bro
Thanks for the sub!
Thanks for taking the time to explain the intricacies of that spring/clip/thing on the airbag. Other vids just say "ok cram this or that effin thing in there" and I bout mangled mine before I found your C L E A R (!!!) explanation.
I'm so glad that it was helpful! Please subscribe so you can stay up to date on our latest videos!
Where can I get an open air wiring harness, like the one in this video, going from the fuse box to under the hood by way of the door jam. I've been looking everywhere!!! ;) Thanks for the video
Great video! Other videos say you should disconnect the battery when disconnecting airbags. You are the first video to show by removing the airbag fuse it will not deploy the airbag correct? Just trying to figure out which way is safer. Still great detailed video!
It doesn't hurt to disconnect the battery. If you want to be as safe as possible, I would definitely recommend it.
@@dudewecanfixit sounds good! I appreciate the advice.
Great video! I have a 2009 suburban and need to remove my airbag to replace the 2 plastic pieces on each side. The small holes you talked about, do I just press inwards to release the airbag or bend?
I think you press straight in, please update me if I am incorrect
Yeah i pressed right in, had to feel around for the right spot though.
That's great!
I am fan of your channel brother .
Thanks, I appreciate it. Please subscribe to my channel
Man this was a god send
Glad it helped!
Appreciate video , helped me remove airbag on 2000 suburban
Hey, I’m glad it helped!
Hey man! When removing the airbags is their supposed to be a “sensor” controlling the bags? Like an airbag module?
There are impact detectors on the car's bumpers
You just saved me from throwing the whole truck away 😅
Oh wow!
Glad we could help!
My 98 Chevy S10 has 4 tabs in the back of my steering column. I have popped each one and the airbag won’t budge. What am I doing wrong?
I'm not familiar with that style unfortunately
Thank u brother for this video,very helpful
Happy we were able to help!
Thank gaaaaawd I found this. Was about to get a bigger hammer
Lol, I'm glad you found this too!!!
I have Chevy Astro 2001, may i know what is the size of the steering wheel centre lock nut size? Because I’m planning to change new after market steering, Tq
I don't have that information unfortunately
I can’t get the airbag to go back in. It’s lined up but doesn’t pop in easily like all the videos? Any advice
Did you remove anything other than the airbag?
Need to put back together,96 dodge dakota v-8 the sterring colume back together.
I have tried and tried to get the retainer to release. No matter how much I try.(even with a little smaller flat head). It seems the connector is corroded or something. I have even used a mirror and light to make sure I was doing it properly. still no luck. Any suggestions would be greatly appreciated.
You may need to bring it to a shop, this should be a simple procedure. If it won't release, maybe a new set of eyes will help
Same here
What a stupid idiotic Gdamn design 🙄
Great job
Thank you!
Yes!
Your sierra or sierra
??
unhh you the MAN '' LIKE IT'
No no no. YOU the man! Thank you for watching 😁
So when I take my airbag out and off the horn or plastic cover I can put the plastic cover back without the airbag? The 4x4 I drive does not have a working clockspring nor do they make them anymore hence the reason to lose what will not work on my4x4.
I'm not sure exactly what you're asking, but why are you trying to remove the airbag?
@@dudewecanfixit Well if you can not use the air bag anymore because the part that makes it work is no longer in production I figured one of these days to get a different steering wheel and the airbag removed before.
So, you are trying to remove the airbag from the horn cover?
@@dudewecanfixit yes then replace the plastic cover till such time as I get another steering wheel. Rather not have a pit in the middle of the steering wheel with airbag and plastic missing ,just for aesthetic reasons.
I still don't understand why you are concerned with removing it. Even if it doesn't work, it's not big, heavy, or visible.
That being said, I don't see why you couldn't remove it and install the plastic cover without it in place. Might even make for an interesting storage compartment
How about a 2003 Chevrolet Venture
I have never worked on one of those
This is the second video I've seen showing this and I cannot get it to work for anything. Starting to really hate this vehicle
What particular problem are you having while trying to get it to work?
How do I permanently remove the air bag, without it blowing up in my face,
I don’t think we are at liberty to give you that kind of advice 😂 Our apologies
The 👍👍✌️
Thanks!
Excuse me... replacement? Explain, why, you, took, it off, just, to put it back on... WTF?