Learn more about the 17x9" Fuel Enduro D608 Wheel (-12mm Offset) and LT295/70R17 Falken WildPeak Mud-Terrain M/T Tires over on our dedication build breakdown pages - www.stage3motorsports.com/Stage-3s-2014-F150-STX-Hunting-Truck-Builds-Leveling-Wheels-Tires.html
There's no such thing as a stupid question here! The 3" refers to the height of the physical block it's self, for this product when you go to order on our site you would select a 2", 2.25" or 2.5" block option!
If I was to just remove the factory block to level the back to the front would that effect drive ability? I can never seem to get straight answer anywhere
We had the FOX 2.5 Factory Series Piggyback Reservoir Rear Shocks installed! Learn more about the suspension setup on this build in the link! www.stage3motorsports.com/Stage-3s-2014-F150-STX-Hunting-Truck-Builds-Leveling-Wheels-Tires.html
If some kits go over 2 inch blocks what do I need to make driveline issues risk as low as possible and at minimum
What's the best way to do this using a floor jack and jack stands?
What wheels/tires? I really like the look of them. Thanks
Learn more about the 17x9" Fuel Enduro D608 Wheel (-12mm Offset) and LT295/70R17 Falken WildPeak Mud-Terrain M/T Tires over on our dedication build breakdown pages - www.stage3motorsports.com/Stage-3s-2014-F150-STX-Hunting-Truck-Builds-Leveling-Wheels-Tires.html
@@stage3motorsports Thank you
Can these blocks go on a 17 Gen2 raptor & do i need an alignment afterwards?
Do you need longer shocks?
If you want it to ride good yes
I have a Ford f150 4x4 2010 6" lifted can I add 2" on the rear
Give us a call for more on how to lift you rear end 2" Javier 623-434-5277
Did they ever say how
Maybe a stupid question...but here we go. So if the block says 2", 3", etc, is that the size of the block or the amount of the lift?
There's no such thing as a stupid question here! The 3" refers to the height of the physical block it's self, for this product when you go to order on our site you would select a 2", 2.25" or 2.5" block option!
If I was to just remove the factory block to level the back to the front would that effect drive ability? I can never seem to get straight answer anywhere
nope
Made my FX4 rear end ride smoother over bumps.
What kind of shocks did u used
We had the FOX 2.5 Factory Series Piggyback Reservoir Rear Shocks installed! Learn more about the suspension setup on this build in the link! www.stage3motorsports.com/Stage-3s-2014-F150-STX-Hunting-Truck-Builds-Leveling-Wheels-Tires.html
Any torque specs?
Gutentight!
No gloves or safety glasses.
Both are for pussies! That's why God gave you an extra eyeball and TEN fingers!