Sorry for the lateness in comments, but THANK YOU! I did come across the same site you showed, but obviously had no idea what the settings were (or even if they were for teh T8), so this is more than helpful. I think the only change I would make would be the brakes, which I think are set to strong, which means I can stop on a dime, but could also go tumbling off if not careful. Thanks again for this!
I just subscribed to your channel. I find your videos very helpful. I pulled the trigger on the Hiley T8 Pro after discovering your channel. Keep up the awesome content! 👍🏼
I’m not sure if there’s a factory reset - I think you just have to manually change them all to the stock settings. These displays are used on a wide variety of scooters and are programable for that reason.
@@ChefMarty97 The video explains it - you hold down both buttons to get into your P settings and 2626 is your unlock code to get in and switch settings.
@@CarelessKingdom thank you what should my P1 be. It was at 50.0 but I put it at 41.0. Just want to make sure it’s right but I don’t want my battery to turn off to quick.
It's the voltage - I'm not sure what it changes to I'd assume 52v from 48v. ***Do Not Change*** It as it could potentially cause damage to your scooter.
Hi I got the discount code you was saying that it ships to anywhere in the world but I'm not in the usa I'm in jamaica so how do I go about ordering it?
@@CarelessKingdom thanks for coming back. But I don't think so. But I can get someone to order it in the usa for me. And bring it back with them. One thing I'd like to ask how do I go about getting spare parts
Mine has been charging for like 8-9 hours and the indicator says green but it isn’t turning on and I’ve looked through the user manual so many times. Do you have any ideas why?
Make sure the display is connected to the scooter. It had a quick disconnect cable near the display before running into the scooter - unplug and plug back in.
@@elite_ham1 AHHH! Yeah that’s the NFC lock mine didn’t come with that. Dope feature though - drop of a sub if you haven’t I’d much appreciate it and thank you for watching! Safe riding!
@@Karuyukata try changing it to 50 then saving - go back and change to 100 again. If this doesn’t work be sure you’re on turbo, and have dual motors engaged.
@@CarelessKingdom ok thanks anyway and would you make a video of changing the tire mine is finished and I don't want to take it to the shop they take $60 for each tire to replace
@@CarelessKingdom i figured it out, so for all the e-scooter in europe you need to open it up where the controller is and find a cable that goes in a loop on the controller and cut the wire. boom
Sorry for the lateness in comments, but THANK YOU! I did come across the same site you showed, but obviously had no idea what the settings were (or even if they were for teh T8), so this is more than helpful. I think the only change I would make would be the brakes, which I think are set to strong, which means I can stop on a dime, but could also go tumbling off if not careful.
Thanks again for this!
Happy to help 😊
I just subscribed to your channel. I find your videos very helpful. I pulled the trigger on the Hiley T8 Pro after discovering your channel. Keep up the awesome content! 👍🏼
Thank you!
Is there any options for change tire to off-road and what is the diameter inside the hub
There is no off-road option with this version of the T8P - you'd want to look into the T9P or T10P with the pneumatic tires
burat
ay thanks this really made my scooter much better
Happy to help! Slap that like and sub for ya boy ❤️
Hey bro I have the T9 just wondering if changing from hard start to soft start would save me range?
It should - how significantly though I'm not sure
Thank you for this even though i own raze valkyrie but its the same p settings
Thanks mate Yr awesome, can't wait for more videos on this scooter 🙌🏻👍🏻
Thank you!
@@CarelessKingdom How do you plug 2626 in and what does that do.
love your channel❤
Thank you so much!!
Does this go 31 MPh out of box cause mine is only going 15 mph
@@salski81 you might need to change the p settings or make sure you have the modes correct
Hi I put 2626 never turn to the p sitting what can I do
Email them
how do you reset the display I just changed my speed to 20 only I want to reset the whole thing
I’m not sure if there’s a factory reset - I think you just have to manually change them all to the stock settings. These displays are used on a wide variety of scooters and are programable for that reason.
How do I put 2626 in? I got every down but that
Also what does that do?
@SoapsDope
@@ChefMarty97 The video explains it - you hold down both buttons to get into your P settings and 2626 is your unlock code to get in and switch settings.
@@CarelessKingdom thank you what should my P1 be. It was at 50.0 but I put it at 41.0. Just want to make sure it’s right but I don’t want my battery to turn off to quick.
@@ChefMarty97I do believe 41 is correct
What application do you use to change lightings?
I forgot the name but it’s in the user manual
Hey boss, did u figure out what p3 is? Thank you
It's the voltage - I'm not sure what it changes to I'd assume 52v from 48v. ***Do Not Change*** It as it could potentially cause damage to your scooter.
Wait so p7 makes the top speed higher? Or does it just accelerate faster
P07 makes it give all the power instead of a slow build up
Hi I got the discount code you was saying that it ships to anywhere in the world but I'm not in the usa I'm in jamaica so how do I go about ordering it?
I’m not sure - I know for the UK they have their own site. Maybe they ship to Jamaica? 🤔
@@CarelessKingdom thanks for coming back. But I don't think so. But I can get someone to order it in the usa for me. And bring it back with them. One thing I'd like to ask how do I go about getting spare parts
Hey do you know another code for the scooter because 2626 is not working for mine?
Hey! Try all 0’s if that doesn’t work contact Hiley and they will be able to give you a few to try. Thanks for watching 🌻
Thank you
Mine has been charging for like 8-9 hours and the indicator says green but it isn’t turning on and I’ve looked through the user manual so many times. Do you have any ideas why?
Make sure the display is connected to the scooter. It had a quick disconnect cable near the display before running into the scooter - unplug and plug back in.
@@CarelessKingdom yeah I just tried that and it still doesn’t work. Thanks though
@@elite_ham1 Happy to help - definitely reach out to them because something is wrong
@@CarelessKingdom I just figured it out I had to like put the little tags on the small screen
@@elite_ham1 AHHH! Yeah that’s the NFC lock mine didn’t come with that. Dope feature though - drop of a sub if you haven’t I’d much appreciate it and thank you for watching! Safe riding!
How do I fix the display not showing the right speed
If it possibly in KPH instead of MPH? If so change that setting. (KPH will read a lot higher than MPH)
What does P2 do
@@joshuagordon5572 The magnets per motor don’t change
The P settings on my Hailey Tiger T8 does not work at all, I think it’s a bunch of crap.
Contact the manufacturer that’s definitely not good
What’s the passcode for the hileyx10 and how do I lock it in?
Same as the T8 I think
Hi , how to unlock the full speed please mine is lock at 25
Make sure P8 is at 100
@@CarelessKingdom it is at 100
Please help I can't find the issue
@@Karuyukata try changing it to 50 then saving - go back and change to 100 again. If this doesn’t work be sure you’re on turbo, and have dual motors engaged.
@@CarelessKingdom I've try all of this but still 25 kmh 😢
Which do you prefer in p7?
Set to 0 = Hard start on - N Soft shown on the display
What is the p08 ?
It’s the percentage of top speed. For instance if top speed is 28 and you put it at 50% then your top speed is now 14
and what about P0 if you changed higher ? exemple to 9
You'd be less efficient I'd assume. I don't think it would gain any benefit from it.
how to reset please
Hey! Just got off the P Settings in the video and manually adjust back to stock - I’m not sure if there’s a way to reset. Thanks!
@@CarelessKingdom thanks it works great now......Do you know if I remove speed limiter what will happen can you tag me in video or
alot of people says it burns the battery and controller if I cut the speed limiter wire
@@crip2170 That I'm not sure of - I'd probably avoid cutting the wire
@@CarelessKingdom ok thanks anyway and would you make a video of changing the tire mine is finished and I don't want to take it to the shop they take $60 for each tire to replace
I have t8, password 2626 is not suitable, where can I find out the password?
Contact Hiley - it should be 2626 its the same for my T10p as well
Try 1111 :)
@@d3stinYwOwYeah it worked. Thanks
I did everything but mine is still 20kmh
That’s no good! Contact the manufacturer 😮
@@CarelessKingdom i figured it out, so for all the e-scooter in europe you need to open it up where the controller is and find a cable that goes in a loop on the controller and cut the wire. boom
@ thanks for the information
Nevermind im an idiot lol
@@salski81 lol you’re good my dude