Retrofitting F80 F82 Seats In my E91 M3! Also Works On (E90,E92,E93,328i,335i,M3)
ฝัง
- เผยแพร่เมื่อ 15 ต.ค. 2024
- Let me know you guys have any questions about this retrofit and would you guys do it? I think it made the interior and just mad it that much more modern! Absolutely love it and can't wait to get the rest of the interior done!
●My Ebay Store: www.ebay.com/u...
● Merch: NADIPERFORMANC...
● Follow me on Instagram: / nour_hummadi
----------------------------------------------------------
SPONSORS! (CODE)
KiesMotorsports NOUR5
BurgerTuning
FCP EURO
AzaAutoWheel
Suvneer
SSR Performance
----------------------------------------------------------
You need to run canbus to the passenger seat module and connect pin 2 to ground (pin 8) on the main power/canbus connector to the seat module to tell the module its on passenger side (driver and passenger side modules are the same but needs this extra wire connect to ground to know the position.
This is because e90 / e91 usually dont have a canbus seat module on passenger side and have a separate pwm heating module.
Feel free to hmu if you need help figuring it out
Would be great if you have some links or info to share. I bought F30 seats for my E90 LCI.
@@SinanGhareb, same. 🙋♂️
Is this the wiring process to get tje heated function to work on the passenger seat?
I wonder if there's ever any viewers that are coincidentally diy'ing the same project as Nour at the time he drops vids
Big up to you Nour, the ///M3 E91 just keeps on getting better!
Can’t wait until it is finished!
Keep up the grind Nour! 👏🏼
I did this on my e90 and did the forge carbon backs and love it and put the rear seats too I love it the stocks seats suck compared to these and I saw ur last video and was hoping u did this swap
Uk says the new seats look stunning. Awesome transformation. Keep going Nour. You’ve the best channel by far. 🇬🇧
Fr
Bro I’m so glad too see you uploading again, I’ve missed your vids so much😭😭
Glad to see Nour bringing in help so we can all see it done mostly the right way. :}
That’s what takes a vid to the next level, props Nour!
Nice little upgrade to the interior 🎉
bro haha same crap happened to my passenger seat on my f32. the bar where the motor sits broke. in my case it was a metal water bottle that got caught under the seat while moving it, which broke the bar in half. I bought a second seat to swap over the full rail system just like you, but I wasn't able to remove the original seat off of the rails, so it's been sitting there like this for months now lol. I think about it every time I get in the car :( I'm going to try and see if I can loosen the same bolts as you have, thank you so much for this video
Will f83 m4 seats work on E93 m3, ? Air scarfs too?
the small Module on the passinger seat is the seat heating module - only controlling the heating funktion - those have a different wireing connection than the big moduls
the small modules get a PWM Signal from the centre console buttons
the big ones from the can bus
to get the heating working you basicly need to add in the can bus wireing inside the car to the passinger seat connector and then also add it into the seat itself
Doubt that little wire did any damage to the seats. My m4 had that same problem. It just randomly froze up on one side.
these would look so dope in an e46
Truly a one of one E91 M3 😊
Wouldnt you get a black interior nour??
I think the limerick paint with the Silverstone interior would be goals so aiming for that even this its harder!
Yeah the limerock/orange will look absolutely badass✌️✌️
Paint wen?
@@B48Benje not sure, it’s 10-13k for full paint so might be a while haha
@@NourHummadi not if we all team up and paint it :) you saw my Sparkling graphite E90, that was with cans🥹
I think a ticket too Murica and some basic paint supplies we can get it painted for around £2000
Black would be a higher contrast with the outside, sure, but Nour lives in a place with a lot of sunshine... black leather and sun is just a bad mix, dawg 😂😂
How do you fix the problem with the Seat belt from E9x on the F8x Seats? Thanks for help
He said the e90 belt bolted straight to the F30 M3 seat. I don’t think that’s the case for my E90 M3 belt to my F30 M3 comp seats? 🤔
Hello bro, I bought seats the same as yours for a 2014 m4, I tried to place them on my 2011 e90 but I noticed that the rails of the m4 seats are wider and do not fit the body, did you make any adaptations?
Nice 👍🏽
Salam Nour!
What's the part number of the seat Module? Doing the same seat swap on my E93 .Thank you!
Did you code out the errors? If so, how did you do that. I put in f82 seats in my e92 and trying to get the errors coded out. Carly doesn't work.
Did they bolt straight in or custom rails?
Will this work for E46 M3?
Bring this ride to Sema😏
Just done this but heated seats and bolsters not working, any ideas?
Don't have the part numbers for the seat modules?
Will this work on e82 135i?
Good video💪
does the seat airbags still work?
yes sir
what beat did you use for the b roll?
link for seats??
Where can I buy your seats??
We need a "I drifted my M3" type of videos,I ain't tranna watch rewiring seats
Lum-BAR like a bar. Not lumber, it's not a 2x4
Frankenstein bmw
Where's nick???
"I want to get this car at 100% and make sure everything works as intended" 😂😂😂😂😂😂 can't even wire the seats
How about you go down there and wire em?
Goofy asl 😂 🤡
thats not a m3 lmao
ur e46 is not an m3… baby power
@@ai335i wen did I say it was lmao
It's the M3 BMW should have built. And wagons are just better looking than sedans.
@@razorwireclouds5708 ur high asf wagons are for family’s
Yea I really don't care that you used a real m3 donor. But it's not an m3 unless you used those numbers too. I mean It is an e91 m3 just not an m3 if that makes sense
L take
yeah, noone really cares what you think either..... hope that makes sense