I loosed the top coupling bolts to pull the motor and the seal stated spraying water when I pulled on the motor? Do I need a new seal or did I do something wrong?
Hi, if you have only loosened the clutch and removed the engine (so if you have not tampered with the shaft seal or the nuts on the pump), then the shaft seal should not be leaking. Maybe you have shaken the pump shaft when you removed the motor? Then you have to change the axle seal. I hope this is of help, otherwise please contact your local service office: gfos.ly/60549QXGO.
Hi! Thanks for reaching out to us and for your interest in our products :) Can you specify a bit what kind of information you need? Otherwise, I can also recommend you to visit our website via this link and filter for CR 20 pumps: gfos.ly/6056PVWSG Here you will be able to see descriptions and variants of each pump model, specifications, spare parts, drawings, documentation and services etc. Let me know if there is anything else I can help you with. Have a great day! Kind regards, Sofie
Hi Daniel - The service tool numbers are shown in the CR, CRI, CRN 10, 15, 20 Service Instructions: grundfos.to/3r3HvOQ. Hope this helps. Kind regards, maria
Good working company grundfos❤
I loosed the top coupling bolts to pull the motor and the seal stated spraying water when I pulled on the motor? Do I need a new seal or did I do something wrong?
Hi, if you have only loosened the clutch and removed the engine (so if you have not tampered with the shaft seal or the nuts on the pump), then the shaft seal should not be leaking. Maybe you have shaken the pump shaft when you removed the motor? Then you have to change the axle seal. I hope this is of help, otherwise please contact your local service office: gfos.ly/60549QXGO.
Make a video to conection pipe with intake pump
I need a video to show how collecting the parts of the mechanical seal. Thanks 😊
C'est très intéressant.
Good working company grundfos
Yo tengo problema con un bombeo de una bomba centrífuga tengo parte de piezas del bombeo y no se donde consequirla
envianos un mail, y veamos si podemos ayudarte...
perfect
thanks
I need to vido and spicification and sop CR 20 Pump Gurndfos makeCR 20 please kindly sent Thanks
Hi! Thanks for reaching out to us and for your interest in our products :)
Can you specify a bit what kind of information you need?
Otherwise, I can also recommend you to visit our website via this link and filter for CR 20 pumps: gfos.ly/6056PVWSG Here you will be able to see descriptions and variants of each pump model, specifications, spare parts, drawings, documentation and services etc.
Let me know if there is anything else I can help you with. Have a great day!
Kind regards, Sofie
nice service
Good Working
A mola fica na parte de cima ou de baixo??
@grundfos part no. of special tools are very hard to find. It would be helpful to show the number of any special tool used in the video. Thank you.
Hi Daniel. Great question. I will investigate this and get back to you as soon as possible! Kind regards, Maria
Hi Daniel - The service tool numbers are shown in the CR, CRI, CRN 10, 15, 20 Service Instructions: grundfos.to/3r3HvOQ. Hope this helps. Kind regards, maria
@@grundfos thank you!
@@danielkarlsson608 Thank you for asking - we have put it into the description of the video now :)
Obrigado pelo vídeo, corrigi vários erros de montagem aqui na empresa
Very well❤❤❤
👍
Harga cnp berapa bos
L80 hadir
Good working company grundfos❤