ja tenho uma Licença para Controladores de código G, comprei uma FIber Laser , se eu atualizar a licença no site para Controladores Galvo: vou poder usar o software nos dois tipos de laser com a mesma licença?
I would make sure that your fiber laser is compatible with LightBurn. LightBurn currently supports EZCad2 and EZCad2-lite based Galvo controllers. If so then yes you will only need to upgrade your current license to have support for both gcode and galvo. Here is the link: lightburnsoftware.com/products/lightburn-add-galvo
Just did my first testing with my 5W UV laser. Can someone tell me how I can change the power setting in Lightburn? I can change speed , frequency and pulse but Lightburn isn’t letting me change the power setting?
Power is right under Speed in the cuts/layers window. You can also double click any layer to open the Cut Settings Editor. Power is also under speed in that window.
@@LaurentiuVasiliu-z8w - I’d suggest reaching out to support@lightburnalftware.com. We’ll need screen shots and config information and there’s no way for you to provide that in TH-cam comments.
In the Device Settings window you can reverse the output of either galvo along the left side of that window. If you imported your EzCad config it should have done that for you. docs.lightburnsoftware.com/galvo/Setup.html
Not sure what I'm doing wrong, but none of the Frame options are working for me. The only button that works there is Start which of course starts an actual burn. Thanks in advance!
Man i wish lightburn worked with full spectrum laser..well without changing the controller. This software is so awesome with my fiber.
ja tenho uma Licença para Controladores de código G, comprei uma FIber Laser , se eu atualizar a licença no site para Controladores Galvo: vou poder usar o software nos dois tipos de laser com a mesma licença?
I would make sure that your fiber laser is compatible with LightBurn. LightBurn currently supports EZCad2 and EZCad2-lite based Galvo controllers. If so then yes you will only need to upgrade your current license to have support for both gcode and galvo. Here is the link: lightburnsoftware.com/products/lightburn-add-galvo
@@lightburnsoftware7189sim, o laser de fibra é compatível, muito obrigado
Just did my first testing with my 5W UV laser. Can someone tell me how I can change the power setting in Lightburn? I can change speed , frequency and pulse but Lightburn isn’t letting me change the power setting?
Power is right under Speed in the cuts/layers window. You can also double click any layer to open the Cut Settings Editor. Power is also under speed in that window.
Look awesome. When it show the red laser pointer we want to change size with outline drawing. İs it possible now?
No, not yet.
I followed the steps in the tutorial to install the galvo laser and nothing happens when I press the frame and start buttons.
@@LaurentiuVasiliu-z8w - I’d suggest reaching out to support@lightburnalftware.com. We’ll need screen shots and config information and there’s no way for you to provide that in TH-cam comments.
does anyone know how to fix image/project to laser correct. Just switched to lightburn on 50 watt Wisley and it marks everything in mirror
In the Device Settings window you can reverse the output of either galvo along the left side of that window. If you imported your EzCad config it should have done that for you.
docs.lightburnsoftware.com/galvo/Setup.html
Not sure what I'm doing wrong, but none of the Frame options are working for me. The only button that works there is Start which of course starts an actual burn. Thanks in advance!
nm I got it. Had to go to device settings and choose Red Dot IO port. (Port 4 worked for me)
Woah wait….what is that LED on your galvo head?? Link please
Do you mean the lighting strip, or the two focusing lasers?
@@lightburnsoftware7189 yes the light strip. Of IRS just an LED battery powered strip, I can do that. It appeared to be built into the galvo head
Is software can working with MR.Carve M1 device?
Not yet, but we're working on it.
Hi Guys.....Mines doing a mirror burn of the text :(
Have you fixed the problem?
Strange I still can not figure out why my laser won't engrave but follows the engraving lines when start is clicked lol
Has the laser ever worked? Can you manually fire the laser? If you are still having issues contact our support team - support@lightburnsoftware.com