I miss an sd card slot for avoid to travel with a pc/mac for recording multitrack. with this feature this could be the next standar for field location recording but.. without SD card is a issue.
What I want to know: 1.) In multi-track, can you set the bit & sample rates? The manual says that it's 32bit / 96K. I'd like to record at 24bit / 48K. This is for the multi-track NOT the two track. 2.) the manual isn't clear enough about the USB port on the back of the mixer. Can a USB B3.1 cable be used? Or does it have to be a USB B2.0 cable? THANKS!
Hello. Thanks for your training🙏 With this mixer, can we record the sound both with and without effects at the same time in live performance, on only one input line? (in interface mode)🤔
Hi is there any way in cubase to send the sends to a fader on the Dm3? So that I can control the fx such as reverb and delay on that fader?Thanks for the videos these are great.
Do the outputs of Zoom default to a particular USB channel pair? I ask because on my StudioLive 32SC the Zoom output defaults to USB 1&2 which renders those inputs useless for analog connections and according to Presonus these Outputs are “assigned by Zoom software”. I wonder if this true for the DM3.
I think if Yamaha can make a TF Rack 3U version with 16 combo jacks, 10 inch screen (since I believe the behringer wing rack was roughly based on Yamaha TF rack) a bit more pricey than the TF rack. That would be awesome (and quiet enough for Studio/Live use). More than 1 headphone jack.
Hello. good time. Thank you for the videos you publish. I wanted to ask clearly, "Yamaha DM3" can do this?🤔👇👇 " After installing the driver on the laptop, the singer's voice is transferred from the mixer to the speaker, and multi-track recording is also done on the laptop. At the same time, the audio file will be played on the same laptop that is recording the sound, and its sound will also be heard from the speaker connected to the mixer. " Thank you very much for your attention and response🙏🙏
excuse me, I don't understand if it is possible to record several tracks in a stereo file on the USB stick without going through the PC / DAW. We are a piano and voice duo and we would like to record the performances on the USB stick with excellent audio quality without having to use Cubase or similar. Is it possible to send the mixed production directly to the DM3S on the front USB?all the post recording effects like compressor, reverb, limiter and voice effects how are they? is it possible to do everything from the dm3s machine? thanks
I'm assuming you've figured out the answer to your question by now, but if not-you can only record a stereo file to a USB stick inserted in the front panel. This means that if you want to record more than two mic sources, you should send all your tracks to a stereo mix bus, and tell the recorder to record that bus. Keep in mind all mixing and processing will have to be done in real time.
@@soundman1402 Thanks for the info... The DM7 is very nice but just a bit too much for my needs and or budget. If there was a way to cascade 2 DM3s that would be PERFECT for me!!!
Hi, I use the DM3 as an audio interface for Multitrack audio recordings. However, one very important issue I face is that the level going into the DAW through USB, cannot be adjusted through the faders. I have to adjust it through the audio gain knob, or somehow adjust the incoming level from the source itself which is not always possible. Is there a way to control the output level going through usb through the faders?
Can it control Logic X pro as it does with Cubase AI? Yamaha often disables certain functionalities for non Cubase DAWs to promote theirs. Also, can the turn knob be used as a jog/scrub wheel in a DAW like Tascam model 12? That would be great! I am missing 8 endless rotary encoder as well. What's the point of controlling pans with just one turning knob, the touch screen or faders? Can it control all my logic pro plugins like Behringer x touch does? Only controlling the faders and transport are not enough. I am sure Yamaha dropped the pots to save their other mixer products. That's how the music industry kills our dream of getting a perfect, convenient, ergonomic device for the sake of profit, politics and competition every f**** time! However, I am still planning to sale off my Behringer x touch DAW controller, analog mixer and my USB audio interface and buy this beast! I waited 20 years for an all-in-one mixer-interface-controller combo device like Digidesign Digi 002. Probably the post-pandemic drop of hi-end mixer sales prompted Yamaha to bring back this economical all-in-one old concept back.
just read the manual and found out that the touch and turn knob can actually be used as a scrub/shuttle jog wheel in DAW control mode and Yamaha didn't even bother to mention that! And there are other midi program change functions that can switch DM3 scenes on the fly and do some automation with faders! where are the instructions videos of those top selling features? Do Yamaha marketing guys think people would buy a $1700 digital mixer like this for live mixing only? it's main selling point is multi channel usb audio interface and DAW control, the very rare 3-in-1 device, yet Yamaha promoted a very little about those functions!
@@myspikkels1 No it's not :-) I rather suspect he was once a primary school teacher I still enjoyed the very informative video - I just found myself giggling at the (clearly unintentional) but rather patronising tone.
Please add the dugan mixer and an update where dante can be expanded to allow 32 inputs.
I think you are referring to the QL1 update!!!
And add insert points!!!
Dugan is coming.
@@howlingwolvenAny idea when? (I’d also love to see Mackie MCU support.)
I miss an sd card slot for avoid to travel with a pc/mac for recording multitrack. with this feature this could be the next standar for field location recording but.. without SD card is a issue.
Ok but im not clear on how to actually record the show file onto the drive???!!!????
Use the record and play/pause minbar
What I want to know:
1.) In multi-track, can you set the bit & sample rates? The manual says that it's 32bit / 96K. I'd like to record at 24bit / 48K. This is for the multi-track NOT the two track.
2.) the manual isn't clear enough about the USB port on the back of the mixer. Can a USB B3.1 cable be used? Or does it have to be a USB B2.0 cable?
THANKS!
Hello. Thanks for your training🙏
With this mixer, can we record the sound both with and without effects at the same time in live performance, on only one input line? (in interface mode)🤔
Hi is there any way in cubase to send the sends to a fader on the Dm3?
So that I can control the fx such as reverb and delay on that fader?Thanks for the videos these are great.
Will it allow me to scroll all tracks and change their volumes if the number of tracks is over 22 in Cubase?
Do the outputs of Zoom default to a particular USB channel pair? I ask because on my StudioLive 32SC the Zoom output defaults to USB 1&2 which renders those inputs useless for analog connections and according to Presonus these Outputs are “assigned by Zoom software”. I wonder if this true for the DM3.
How do they come up w 22x channels? Can u hook it up to a tio n expand it to say a full 32 channel mixer? Only 4x combo jacks?
DOES THE DM3 COME WTH THE SAME PREAMPS OF THE TF SERIES???
Hi, can i run out from daw to DM3 and return into daw for mix-sum (L+R) via USB?
Seems like you can. Skip to about 4 minutes in. I would also enjoy seeing someone demonstrate this, to be certain.
I own a dm3 mixer. How can I connect audio via USB from my computer
Where’s the Dugan?! I know a lot of companies that would buy this in a heartbeat with a Dugan onboard!
I think if Yamaha can make a TF Rack 3U version with 16 combo jacks, 10 inch screen (since I believe the behringer wing rack was roughly based on Yamaha TF rack) a bit more pricey than the TF rack. That would be awesome (and quiet enough for Studio/Live use). More than 1 headphone jack.
Hi! Has anyone done multitrack recording using the DM3S (standard, not Dante) with Logic???
Tôi không thể thiết lập được recording từ bàn DM3 qua máy tính
Hello. good time. Thank you for the videos you publish.
I wanted to ask clearly, "Yamaha DM3" can do this?🤔👇👇
" After installing the driver on the laptop, the singer's voice is transferred from the mixer to the speaker, and multi-track recording is also done on the laptop.
At the same time, the audio file will be played on the same laptop that is recording the sound, and its sound will also be heard from the speaker connected to the mixer. "
Thank you very much for your attention and response🙏🙏
Tôi không thể làm được
Is it possible to record multitrack live? So sound and record all tracks at the same time?
Can it be also used with Protools, Ableton and Logic the same way as with Cubase and Nuendo?
Hi can use DM3 mixer to control BMD Vision Mixer on Midi control
Which ATEM MINI are you using there?
Atem mini pro
@@thbcd09etninjafirio95 I love mine, one of my best decisions
excuse me, I don't understand if it is possible to record several tracks in a stereo file on the USB stick without going through the PC / DAW.
We are a piano and voice duo and we would like to record the performances on the USB stick with excellent audio quality without having to use Cubase or similar. Is it possible to send the mixed production directly to the DM3S on the front USB?all the post recording effects like compressor, reverb, limiter and voice effects how are they? is it possible to do everything from the dm3s machine? thanks
I'm assuming you've figured out the answer to your question by now, but if not-you can only record a stereo file to a USB stick inserted in the front panel. This means that if you want to record more than two mic sources, you should send all your tracks to a stereo mix bus, and tell the recorder to record that bus. Keep in mind all mixing and processing will have to be done in real time.
Do these mixers come in a 16-ch version?
How does this product compare to the DLZ creator mixer from Mackie and to the Rodecaster Pro ii?
Wow love the presenter
Andy always does a good job
sugest latest all in one purpose audio interface
Does it work well with Protools?
How can i record my band please?
I really need a DM-6 with 24 inputs and 16 outputs for Dolby Atmos mixing
There's a new DM7! Have you seen it?? Amazing!
@@soundman1402 Thanks for the info... The DM7 is very nice but just a bit too much for my needs and or budget. If there was a way to cascade 2 DM3s that would be PERFECT for me!!!
@@xmusicstudiosLA I'd love to see a DM5. I suspect we'll see one in a few months at this cadence!
Compatible abeltone live ?
Hi, I use the DM3 as an audio interface for Multitrack audio recordings. However, one very important issue I face is that the level going into the DAW through USB, cannot be adjusted through the faders. I have to adjust it through the audio gain knob, or somehow adjust the incoming level from the source itself which is not always possible. Is there a way to control the output level going through usb through the faders?
did you solve this problem?
No
thanks infomation
Почему Touch display так плохо отзывчивый? Проблема многих, DM3 не исключение
Its a shame that headset audio is so shit for an audio tool presentation
What bout Logic Pro X users
👍
Were are music Demos, everybody talking but no music demos in youtube.
Fails in that you cannot multi channel to usb drive. Not everyone wants to carry a laptop to a gig.
YAMAHA : GRAVAÇÃO ;
STREAMING : TOP : DIGITAL - MIXER 3 ;
APARELHOS : SUPER :
SOFISTICADOS : DIGITAL :
CONTROLLER :
GRÁFICOS : DIGITAIS ;
SUPER : MESA : CONTROLLER ; PROFESSIONAL ; SOM AUDIO ; VÍDEO : CAMERA ;
WIRELESS : TOP :
COMPLETED : DM3 : ( Áudioversity ) : Webinar ;
YAMAHA : ELETRÔNICS :
2023 ~ 2025 ; Valor :
US$ 8.000 .
Can it control Logic X pro as it does with Cubase AI? Yamaha often disables certain functionalities for non Cubase DAWs to promote theirs. Also, can the turn knob be used as a jog/scrub wheel in a DAW like Tascam model 12? That would be great! I am missing 8 endless rotary encoder as well. What's the point of controlling pans with just one turning knob, the touch screen or faders? Can it control all my logic pro plugins like Behringer x touch does? Only controlling the faders and transport are not enough. I am sure Yamaha dropped the pots to save their other mixer products. That's how the music industry kills our dream of getting a perfect, convenient, ergonomic device for the sake of profit, politics and competition every f**** time! However, I am still planning to sale off my Behringer x touch DAW controller, analog mixer and my USB audio interface and buy this beast! I waited 20 years for an all-in-one mixer-interface-controller combo device like Digidesign Digi 002. Probably the post-pandemic drop of hi-end mixer sales prompted Yamaha to bring back this economical all-in-one old concept back.
just read the manual and found out that the touch and turn knob can actually be used as a scrub/shuttle jog wheel in DAW control mode and Yamaha didn't even bother to mention that! And there are other midi program change functions that can switch DM3 scenes on the fly and do some automation with faders! where are the instructions videos of those top selling features? Do Yamaha marketing guys think people would buy a $1700 digital mixer like this for live mixing only? it's main selling point is multi channel usb audio interface and DAW control, the very rare 3-in-1 device, yet Yamaha promoted a very little about those functions!
Useless vedio
Please show how to save recording
Is it me or is this guy painful to watch?
It's just you👈😉
@@myspikkels1 No it's not :-)
I rather suspect he was once a primary school teacher
I still enjoyed the very informative video - I just found myself giggling at the (clearly unintentional) but rather patronising tone.
Not really. I've seen much worse! Plus I'm sure he was taking direction and doing as he was instructed.
what an sounding awful mic. what is it?
Worst presenter EVER 😢
Joke of digital mixer 😂
nothing for 2 grand can touch this!
Sad Clown show has arrive, yet again.
Does it work with Logic?