hello thanks for this tuto, i 'v check the contacts for the transponder and also for the batterie and everythings is ok... the card open the doors of the car , but it is non detected ... i' ve you got an advice ? is it possible that the car reading device have a problem?
Hello. On my Scenic 3 I get "KeyCard not recognized" message and the engine is starting ONLY if I insert the keycard. Also doors Lock/UNlock works. I allready replaced the battery. Could be the same issue as you presented in your video ?
@@rako7020 before i changed the plastic cover the buttons worked well but changing the plastic they worked sometimes but now are not working, i don’t even know how to replace the buttons..
+DJ Khunji If it's working with the knife I'm sure you made something wrong. Watch the video carefull again. Now about the knife. The only thing it does is that is pressing on the soldering points so they make contact. Resolder the contacts and it will work.
DJ Khunji generally problemes are caused because of hard drop so you have ti check smal compoment if there is one moved or complitly removed then check the coil witch make a magnetec field to be detected.
@@noemannoeman2176 thank you sir! It worked! To open the Cardkey i used an exacto hobby knife. (Very short blade) to open. If you are to rough you can damage the circuit board. Thank you again 😎
Thank you so much for this video. I just success to fix my card by myself just following your tutorial :)
J ai rebobiné le transpondeur et ça marche 👍
Comment rembobiner le transpondeur svp ?
Thanks a lot for the infornations!
hello thanks for this tuto, i 'v check the contacts for the transponder and also for the batterie and everythings is ok... the card open the doors of the car , but it is non detected ... i' ve you got an advice ? is it possible that the car reading device have a problem?
Thank you Sir, for saving my day 🙂
excellent video, a million thanks
Good day I like to know the component from the first leg on the round black thing what it is mine missing 😢
Hello. On my Scenic 3 I get "KeyCard not recognized" message and the engine is starting ONLY if I insert the keycard. Also doors Lock/UNlock works. I allready replaced the battery. Could be the same issue as you presented in your video ?
i think it is. Because of the broken line makes this error.
Bik like it worket...... save my all day!
Thank you
Hi i had the same problem i fixed this one so the car now can start without problem but the buttons aint working how can i fix them?
Try to replace them.
@@rako7020 before i changed the plastic cover the buttons worked well but changing the plastic they worked sometimes but now are not working, i don’t even know how to replace the buttons..
@@rako7020 can i have your instagram if can i send u some images maybe u can see if there is some inconvenience to the key
thanks worked
Thank you very for the Video, I had try the same as you so but still the same issue, while its working with nife
Can you please advise me what other troubleshooting I should make
+DJ Khunji If it's working with the knife I'm sure you made something wrong. Watch the video carefull again. Now about the knife. The only thing it does is that is pressing on the soldering points so they make contact. Resolder the contacts and it will work.
I have checked unfortunately it showed that I damage the queil, it's my mistake but your video is 100% helped Thank you very much for your efforts
DJ Khunji generally problemes are caused because of hard drop so you have ti check smal compoment if there is one moved or complitly removed then check the coil witch make a magnetec field to be detected.
@@noemannoeman2176 thank you sir! It worked! To open the Cardkey i used an exacto hobby knife. (Very short blade) to open. If you are to rough you can damage the circuit board. Thank you again 😎