Sony PVM CRT Calibration - Menu Color Calibrations
ฝัง
- เผยแพร่เมื่อ 28 ต.ค. 2024
- This episode is the 2nd highlighting the Sub-Menu that is available on most Sony PVMs. This is a Sony PVM 1953. This is a safe and easy way to adjust COLOR and Other important settings on any 1950/1450 series PVM or 20M/14M Sony CRT. Thanks for watching and please subscribe to see new content.
These videos are awesome it has really de-mystified the menuing on a PVM I just acquired!
I want one of these so badly... I would cry if I ever got one
You left in an extra take of the ending. I really appreciate these videos thanks for your dedication!
Thanks. I had a bunch of things go wrong while I was trying to film this episode, and I still was having trouble with the ending while editting. I may go back and try to re-edit.
Retro Tech I didn’t personally think it’s a big deal unless there were other things that went wrong. TH-cam doesn’t let you modify an existing video right? Just gotta completely replace
David C I can edit it in TH-cam a little, but it can be a pain & they've really removed a lot of features so basically I think they want us to edit outside of TH-cam, then publish a final cut.
Exactly what I needed, thank you!!!!
Hi how do get the test on the SNES did you made it your self. ? Can I buy it ? Thanks
Hey man. Awesome channel!
My Sony PVM 14M series gets dim after being on for about 10 minutes or so. Brightness adjustment helps... but continues to worsen the longer it is on.
I'm wondering what I can do to fix this. Any thoughts? Thanks!
Thanks for watching. You could try to adjust the Screen setting on the monitor, but that is on the inside of PVM. Most of the time there is a potentiometer labeled "SCRN" Turning that will increase and decrease the brightness. If the setting is too high or low, the screen can flicker.
The [SCRN] trimmer is located on the neck board near the H-Stat knob.
Thanks! I'll give that a shot.
@@sbeehive9395 Hi, did you managed to fix that brightness dimming issue on your PVM?
@@RetroTechUSA Hello there, could this be related to some aging capacitor, or could be one of the circuits that automatically corrects brightness for an aging tube?
This is probably gonna sound dumb. What’s the difference in running RGB be component? I always thought was the same thing. Been a fan for awhile, and picked up a 1353MD this week, and trying to get everything looking even better than it already does. Using Wii with component cables to run test suite 240p.
How do I remove the rgb or component text in the bottom left hand corner of the screen???
I have a PVM-20M2U (atleast I believe it is, and is labelled on the sticker on the back). When I get in the standard menu there's "status" on the top, going in there will show "PVM-20M4U" on the top right. Is this a known, common thing for the 20M2U?
Perfect, thank you for the guide.
Good stuff. How do you adjust convergence on these? Thanks
Michael Economides i've got to wait for some safety equipment to get here before I make more convergence videos. I do currently have 2 different videos about 3 minutes long each that go over how I adjust convergence on this type monitor.
Ok yeah, I checked out your videos were you adjust it on the older model (2030) so similar for these?
Is it standard how much are the PVMs flickering when tehere is no imput signal?
So same settings for a 20MD2E? Great video
Thank you. I've not personally used that PVM model before, but I think the only difference is the region of the PVM. The setting should be identical or maybe slightly different.
@@RetroTechUSAI alot of them are very similar I think that it's a good thing, be even more confusing otherwise. I've been looking at all sorts of monitors trying to figure them out, next I will be getting to grips with the menus, learning all the time I find it really interesting, my dad was a TV engineer but he didn't work on pvm or bvm, think It must of rubbed off onto me ha!! " I'm hooked keep doing these great videos they are a wealth of knowledge and such a great help
alex jenkins Thanks a lot Alex. That's awesome about your Dad being a TV engineer. Did he work on CRTs? I plan to keep this channel going and also working to improve the quality and content. Thanks for supporting my channel.
Yes he was the man on the ground, delivering crts to people's homes they rented from the company,I belive, and he also repaired them, he worked for granada TV, he blames his hernias on lifting crts will ask him more about it when I see him, looking forward to your new videos and I will be watching the old ones
Very soon cheers steve
en.m.wikipedia.org/wiki/ITV_Granada
Thanks again Alex!
Nice video thanks!
How do I reset everything back to standard?I have 14n6
You might need to find the service manual, but I'm not entirely sure
On my 20-M2U I do not see the config->RGB system set up. Is it auto on these sets? It says component on the bottom left of the screen when I’m hooked up via component
That might be a little different on that monitor. Are you able to get component and RGB to work though?
I don't have anything to test RGB with yet. Working on it and then we'll see. Thanks!
Just picked up a Olympus OEV143 (Sony PVM-14M4U) with the same exact layout as the monitor in this vid. When I'm connect via RGB Euro scart the picture is all red. When I tested out the cable on my Sony Bvm-8045QD the picture is perfect. Any thoughts on what might be the problem?
Sounds like you should check the "GAIN RED, GREEN, and BLUE" Settings on the Color Temp you are using in RGB. Try to increase blue and green, then decrease red. Also, does the problem show on the other inputs besides RGB?
Retro Tech Yup for component using the Ps2. Composite with bnc adapter for some reason doesn't work at all with No Sync popping up, same for S-video.
Retro Tech didn't work. I put red down all the way and B and G up and the screen is still all red
Then there is most likely a problem with the color portion of one of the internal boards. It could be bad capacitors or other components. That's a difficult fix.
My phase, chroma, aperture and volume knobs don’t do anything on my pvm knobs
Edit: I see you said on rgb many of the knobs won’t work. Got it.
Hi I have a bvm 20f1u and the osd is not visible do you have a idea what is could be
Do you have the BKM control unit for the BVM?
Yes I do
Did it just stop working one day or did it never really work right when you got it? Does it function at all now? Personally I prefer PVMs to BVMs simply because some weird things happen with BVMs. They are sooo complex. Sync issues come up requiring more equipment on occasions and that's a headache. PVMs are pretty much plug and play and have less issues than BVMs. Most PVMs are easier to operate also.
Yes I have three bvm 20f1u and I haven't had a problem from my other two they all have over 115k hrs but my third one has this issue and has 53k hrs the osd is their but it's almost all black
That's odd. Do you think it's some random screen setting for the OSD on that Monitor? I'd recommend testing to try to find a setting on one of your good BVMs that allows you to either dim or change the color of your white lettering on the OSD. If you find the setting then you can try to find it on the BVM with the problem.
This is perfect. I'll try this on the 1953MD I was asking you about last night.
Can u Tell me that Name of the SNES Game with the Test Picture? That would be awesome!
Thanks U :)
Love u Content
That's the 240p test suite
It worked then went out
I'm sorry. Are you on Facebook? Search to join this group so you can post some pictures and details on your problem. There are lots of folks there who know about this BVM and maybe your problem: Sony PVM/BVM - Users of Sony Professional & Broadcast CRT Monitors