I did not believe for one moment that this'd work but it did! The model I have had way more screws in, but the principles are the same, so don't let that throw you off. I wasn't even sure what exactly he did after opening it, but just tried to mimic it - touched and basically just "played with" everything and kept turning the band with my finger on it, and that did it. Thank you so much for this video!
I was getting a laser sensor error. I removed mine as in the video, it wasn't the exact same as it's a Dreamebot but similar. I used a blower to clean it out and there was a tiny bit if dust on the rubber band. It works now. Thanks!
Thank you so much for this video!!! We were so upset that our Mi S10+ did not run anymore after two weeks use. It winded a hair inside the belt drive of the LDS sensor, which caused it to stick. I removed it and it works now again ❤
Dzięki! Działa! 🙏 Właśnie rozkręcaliśmy z mężem naszego robocika i już w myślach szukaliśmy cmentarza dla robotów 😅😂 a tu proszę - działa ten sposób. Dzięki wielkie jeszcze raz za ten filmik.
My D9 also having issue. 1. The mapping sequence is way off now (not doing the normal sequence where it cleans the border from right to left then zig-zag to cover open areas) 2. The mapping in the app (the white lines) also is way off now. Very minimal lines shown despite it already covered more areas) 3. Frequently doing the reverse motion in high velocity and thus hard bang on it’s back, persistently
You dont have to do this : just take a Pen and put some absorbent paper on it, fix it with an elastic and humidify the paper A LITTLE BIT ! you can now clean the laser 🙏 it worked for me 🥳
![[DIY] Xiaomi Dreame D9 "laser sensor error" LSD fault - Fixed 👍](/img/n.gif)
I did not believe for one moment that this'd work but it did! The model I have had way more screws in, but the principles are the same, so don't let that throw you off. I wasn't even sure what exactly he did after opening it, but just tried to mimic it - touched and basically just "played with" everything and kept turning the band with my finger on it, and that did it. Thank you so much for this video!
I was getting a laser sensor error. I removed mine as in the video, it wasn't the exact same as it's a Dreamebot but similar. I used a blower to clean it out and there was a tiny bit if dust on the rubber band. It works now. Thanks!
Thank you so much for this video!!! We were so upset that our Mi S10+ did not run anymore after two weeks use. It winded a hair inside the belt drive of the LDS sensor, which caused it to stick. I removed it and it works now again ❤
could you add a text description of the actions you perform?
Dzięki! Działa! 🙏 Właśnie rozkręcaliśmy z mężem naszego robocika i już w myślach szukaliśmy cmentarza dla robotów 😅😂 a tu proszę - działa ten sposób. Dzięki wielkie jeszcze raz za ten filmik.
My D9 also having issue.
1. The mapping sequence is way off now (not doing the normal sequence where it cleans the border from right to left then zig-zag to cover open areas)
2. The mapping in the app (the white lines) also is way off now. Very minimal lines shown despite it already covered more areas)
3. Frequently doing the reverse motion in high velocity and thus hard bang on it’s back, persistently
this was super helpful, thank you so much!!!
You dont have to do this : just take a Pen and put some absorbent paper on it, fix it with an elastic and humidify the paper A LITTLE BIT ! you can now clean the laser 🙏 it worked for me 🥳
Does anyone know what he did after he took it out ? Did he replace it, did he just clean it ? I mean...
In my case, I removed the motor with the small pulley (2 screws) and cleaned the shaft, it was full of cat hairs. It solved the issue.
Thank you vere much and happy new year❤
Can you please just tell what did you do after you opened it..did you clean it only ? My robot s 6 same alarm appeared..and it doesn't work 😑
THANK YOU FOR REAL HELP!!!
This is not a full tutorial! Just cleaning was not enough, I had to lube a tiny motor axle to eliminate "error 1".
It works again! Thank you!
Thank you....this was really help! :)
Дякую 🙏🏻
תודה רבה! now it work`s
Thank you it helped me alot
worked perfectly 👍👍
Teşekkürr ederim sayenizde robotum çalışıyor😊
Thank you soooooooooooo much! 😊
CONSEGUI!!!! MUITO OBRIGADA!!!!!
Parou de novo 🤡
Thank you so much, it works❤
Thank you so much ! ❤
Thanks!
Thank youuuuu❤
It works. Thanks.
Thank you!!
Thank you! Xiaomi servis im Split/ Croatia asks 100 EUR for fixing this problem! And they need 2 months to fix it!
Thanks it works
thank you very mush you are god
It works thanks
Thx
Nice
Very bad video, so much noise!
Thank you 🤝