How to Remotely Access Tenda N301 Router in WISP Mode
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- The Tenda N301 wireless router has a mode called WISP (Wireless Internet Service Provider) that allows users to connect to the internet through a wireless broadband connection. In WISP mode, the router acts as a bridge between the wireless broadband signal and the user's home network, providing internet access to all connected devices. To set up the Tenda N301 in WISP mode, users must first connect the router to their wireless broadband signal and then configure their home network settings through the router's web-based interface. Once the WISP mode is activated, users can enjoy the benefits of a wireless broadband connection without the need for a separate modem or gateway.
To set up the Tenda N301 wireless router in WISP mode, follow these steps:
1. Connect the router to your wireless broadband signal by connecting the WAN port on the back of the router to the wireless broadband modem or gateway using an Ethernet cable.
2. Access the router's web-based interface by typing its IP address (usually 192.168.0.1) into a web browser and entering the default username and password (usually admin for both).
3. Navigate to the "WAN" section of the router's settings and select the "Wireless Internet Service Provider (WISP)" option from the "Connection Type" drop-down menu.
4. Enter the wireless broadband network's SSID, encryption type, and password into the appropriate fields on the WISP configuration page.
5. Click "Apply" to save the changes and activate the WISP mode on the router.
6. Connect your home devices to the router's Wi-Fi network or LAN ports to access the internet through the wireless broadband connection.
To change the port on a Tenda N3001 wireless router, follow these steps:
1. Access the router's web-based interface by typing its IP address (usually 192.168.0.1) into a web browser and entering the default username and password (usually admin for both).
3. Navigate to the "Advanced" section of the router's settings and click on the "Port Forwarding" option.
3. Select the port you want to change from the list of existing port forwarding rules.
4. Enter the new port number in the "External Port" and "Internal Port" fields and click "Apply" to save the changes.
5. If necessary, update any firewall or security settings on your home network to allow traffic through the newly-changed port.