You actually understand these. I have question.. What would be your approach to make /programe tention control for spoling device.. From 0 to let say 10Nm? My would be with servo and chip on video and stm32.
This is the best tutorial for stm32. Can you tell me how can i communicate charger ic(bq25700a) to stm32 for getting status of charging current.in short,which steps should i follow?
Hi Patrick, i have a question - > after transmitting the device adress (Master Pin SDL is output open drain), how can the master recognize an acknowledge from the slave when its pin is output open drain ? is this output from the master switching to an input for the acknowledge sent by the slave ? or is this output sensing at the same time due to alternate function setting ???
Hi , I am working on stm32 i2c, I configured i2c1 in master mode tx. Other side no peripheral. I2c master is not generating the start and slave address on the sdaout. Sclout is also not generating please help me.
Good comment. Do you have any experience with the Atmel Smart ARM platform and controllers? If so, what do you think the benefit would be over the ST Micros? I love Atmel and that is where I started, so I would be very interested, but I would want to know if there is a benefit over the ST Micro, and whether it would be necessary.
Funny you say that. This tutorial series is centered around the fundamentals and mainly on creating libraries from scratch for a deeper understanding of the chip.
he said in his video that you should watch that "video link is in the description" , twice But I can't find any link related to the videos he was talking about
Mohsen Mokrian at that time stamp, I am going over the data sheet for the device. All code is developed from scratch with the help of data sheets and the st reference.
I'm sorry I should have asked this on the next episode . Where you explain the excel file and before that you find a code like AN4235 and then you search the net and you find the excel . My question wast that which file os the one you find the code AN4235 ? There are green scripts in it .... time ; 10:43 .... episode 58
I am about to finish this course.... It is the best ever explanation added online.... Thank you very much.
Thank you for those kind words!!
Here is my first video tutorial for the ARM Muicrocontrollers and the I2C protocol. Let me know if you have any question or comments.
Patrick Hood-Daniel can you please apply this tutorial using code?
your way to describ things is unique !!! thank you so much !!!!
Thanks for such nice series, please keep such a great job.
Another great video.
More arm videos please.
Thank you.
Thanks! Will do.
You made it so simple to learn. Thanks
sandeep kumar Thanks!
Another brilliant video mate, love your work
Thank you so much!
You actually understand these. I have question.. What would be your approach to make /programe tention control for spoling device.. From 0 to let say 10Nm? My would be with servo and chip on video and stm32.
thanks!
This is the best tutorial for stm32. Can you tell me how can i communicate charger ic(bq25700a) to stm32 for getting status of charging current.in short,which steps should i follow?
Hi Patrick, i have a question - > after transmitting the device adress (Master Pin SDL is output open drain), how can the master recognize an acknowledge from the slave when its pin is output open drain ? is this output from the master switching to an input for the acknowledge sent by the slave ? or is this output sensing at the same time due to alternate function setting ???
Hi , I am working on stm32 i2c, I configured i2c1 in master mode tx. Other side no peripheral. I2c master is not generating the start and slave address on the sdaout. Sclout is also not generating please help me.
I wouls love to see some atmel sam tutorials from you
Good comment. Do you have any experience with the Atmel Smart ARM platform and controllers? If so, what do you think the benefit would be over the ST Micros? I love Atmel and that is where I started, so I would be very interested, but I would want to know if there is a benefit over the ST Micro, and whether it would be necessary.
i don't have any experience with arm but have a dev board and trying to learn but struggling.
Maybe using ASF would be a benifit and is easer thay having to find/create you own libs
Funny you say that. This tutorial series is centered around the fundamentals and mainly on creating libraries from scratch for a deeper understanding of the chip.
Can you share your bibliography reference?
The STM32 Datasheet. www.st.com/en/microcontrollers/stm32-32-bit-arm-cortex-mcus.html
he said in his video that you should watch that "video link is in the description" , twice But I can't find any link related to the videos he was talking about
This is undoubtedly the best tutorial for STM32 . Can I ask where did you find "AN4235" code , in which file? time : 10':44'' in this video
Mohsen Mokrian at that time stamp, I am going over the data sheet for the device. All code is developed from scratch with the help of data sheets and the st reference.
I'm sorry I should have asked this on the next episode . Where you explain the excel file and before that you find a code like AN4235 and then you search the net and you find the excel . My question wast that which file os the one you find the code AN4235 ? There are green scripts in it .... time ; 10:43 .... episode 58
Great video as always! You misspelled the title btw
Brandon G ah man!
you are the best bro :)
Cahandar Zeynallı thanks
Still a very popular interface btw
I know. I love it!
GREAT!
Thanks!
donating $$ you soon
Thanks!