Retirement for real?! Man, time doesn't stop, I learned that the hard way, try to start doing it today, maybe tomorrow you won't have the strength or patience
Nice. To be street legal here there has to still be the option to pedal, but that's easy enough - just convert the front wheel. You can convert 2 bikes with 1 hoverboard that way, too. Always like the things you manage to do with hoverboard motors
Really cool build. I tryed to motors in my bike, my1018z rear side mount and geard hub in front. It was crazy quik whit 48v battery, but rediciusly complicated and tough to keep in one part.
Nakakuha ka ng mga kasanayan, at ang iyong pagtuturo ng maraming mga cool na trick. Mahalin ang iyong estilo. Mahinahon ang musika, mahusay ang pag-edit, isa sa mga pinakamahusay na channel sa tubo.
Idol gaming mo talaga sana maturuan mo ako Jan!!! Keep up it up!!! More power!!! Marami nako itatanong syo!!! Two thumbs up👍👍 in innovation and creativity!!!
Awesome video could you take an old dirt bike tear it down put a mid Drive motor on and make a video of it love to see that and I know you could do it well thanks from Texas
Ok na ok yang lifo 32650 boss mas reliable at hindi pa delikado unlike sa 18650 na madaling sumabog kng tatangatanga ka sa pag assemble lol! Great video thumbs up!👍👍
should i try this if i know very little about electricity ill need a hoverboard ... well all i have is a bike i can use (so if they are easy to access and cheap why not)
Hi, I'm Fabio, congratulations, great job, great video. A curiosity with LiFePO4 batteries, do they work well on e-bikes? Many advise against them, they tell me to wear Liion. These 36250 what make and model are they?
Лютый колхоз. НО! Этот колхоз работает без токарки, без центровки и едет. -Едет Карл! в то время когда я сижу на жопе и не хрена не делаю. Лайк однозначно
In your schematic diagram it has 3 motors where was the third motor mounted. I just notice two hub motors. 1 for the front wheel and 1 for the rear wheel. You didn't have a mid drive motor/ i don't think so.
What kind of cells did you make your battery pack out of nickel metal hydride if so I haven't seen that before and I'm curious how it worked out for you long term. The more dollars than sense I want what I want and I don't care how much it cost mindset is predominant but doesn't work for all of this and they're always going to choose lithium ion and the budget conscientious most bang for my buck DIY minority often chooses lead acid batteries that are safe and proven effective but heavy as hell I figured there's probably something middle-of-the-road that works just fine for those of us looking to save a few bucks (more out of necessity than anything else) but aren't willing to double or triple the bikes weight by using lead acid batteries and requiring some decent range so hopefully you'll get back to me on that because I haven't started my build yet specifically because I haven't worked out all the details and I like to have everything settled and planned out start to finish before I even begin so thanks in advance for your consideration to this request.
Nice project I want to build my own How much that's it costs? Where did you buy all the materials you used? Thanks looking forward to you reply Stay safe
Hi nice project have you change the coupling of the motor i mean star or triangle? And what is the voltage of the battery Congrat for this awesome job would be real fun to ride
I don't know what language you speak , I'm in Russian , I write through a translator . Please tell me , how many volts is the battery ? and what is the power at the start ? are the engines warming up ? I have strong doubts that 2 300-watt motors can accelerate up to 60 km. I can't get more than 35 km , 20-inch wheels . Для русских перевод : Не знаю на каком языке ты говоришь , я на русском , пишу через переводчик . Ответь пожалуйста , сколько вольт батарея ? и какая мощность на старте ? моторы греются ? у меня сильные сомнения ,что 2 мотора по 300 ват могут разогнатся до 60 км. у меня больше 35 км не получается , колеса 20 дюймов
We're Filipino and we speak Tagalog mix with Spanish dialects. Althoug I cannot answer your technical questions, there were Filipino teacher in Russia who teach Tagalog that I saw in yt. A friend of mine Vsevolod Kotelnikob has yt channel about Rinzler Bikes.
🌞👍I live high in the mountains with 50-70 ° climbs and am going to build an e-bike with a gearbox so I can climb mountains. Unfortunately, there are still no batteries with a charger for 100-150 km. But the future is not far off. I think that soon there will be mini-power plants based on cold nuclear fusion, invented by Yugin Malov, then the possibilities will be different. ☀️
Could you provide more specs for the bike in the description please? In particular, it would be nice to know the: - Voltage (24, 36 48v?) - Max Speed (Assuming it's 66kph or 41mph?) - Max Power (Watts when traveling at max speed) - Motor rated power (if you know it) - Range (whether it be average, maximum, or minimum would help) - Battery Ah or Wh I would like and subscribe if you added these, thank you.
aL, ano kaya makagawa ka rin ng gañan , quad nmn. Apat na hoverboard motor bale 4WD. Lakas ñan paakyat ng Mt. Samat. English: I may suggest to have you make a quad someday with 4 hoverboard motor as 4WD. That is so strong it may climb Mt. Samat.
When the wheel diameter triples, the motor torque decreases 3 times. And with a voltage of 48 volts, the hoverboard motor rotates 1000 rpm, which with a 24-inch wheel must reach a speed of 115 km on no load, when it can only reach 64 km, which means that the motor operates at a low efficiency and releases a lot of heat loss. Burns. 18 amps are given to the motor all the time. 18×48=864w which half of that waste as heat. this hoverboard motors are not made for direct drive on large wheels. they have high rpm and low torque.
You're one of the most ingenious person in TH-cam!
Congrats, very interesting.
You got skills, and your teaching so many cool tricks. Love your style.
Music is mellow, editing is efficient, one of the best channels on the tube.
Thank you for the inspiration. When I retire I will make this a project. I was also inspired by your Tricycle build. Thank you for sharing.
Retirement for real?! Man, time doesn't stop, I learned that the hard way, try to start doing it today, maybe tomorrow you won't have the strength or patience
lovely invention love it alot of handwork keep it up man
Nice. To be street legal here there has to still be the option to pedal, but that's easy enough - just convert the front wheel. You can convert 2 bikes with 1 hoverboard that way, too. Always like the things you manage to do with hoverboard motors
top speed is good, but the torque or acceleration is like 500w for me
th-cam.com/video/M44C9z_wmI8/w-d-xo.html
Good job, which proves that electric vehicles don't need to be so expensive or complex!
Cars Yes. bikes not so much.
@@AnimeNuki Unfortunately, there are some things you can't get away from....
aL, ang sarap magbasa ng mga koments. Galing ñan.
Really cool build. I tryed to motors in my bike, my1018z rear side mount and geard hub in front. It was crazy quik whit 48v battery, but rediciusly complicated and tough to keep in one part.
You make drilling accurately distanced and centered holes appear so easy, I hope could also come up with tips or instructions on how you did them
it's not. but practice make you better
I'm pretty sure he/she meant the calculations of where to drill them because I, for sure, would have.
I like what this guy did, takes some real skill and imagination 👍🙂
All Thumps Up, bravo!! Inspiration for all people, empowerment! !
Nakakuha ka ng mga kasanayan, at ang iyong pagtuturo ng maraming mga cool na trick. Mahalin ang iyong estilo.
Mahinahon ang musika, mahusay ang pag-edit, isa sa mga pinakamahusay na channel sa tubo.
Haha tagalog na tagalog pero may sumingit rin'g español at ingglis, grabí talaga tayong manga pinoi lol
Idol gaming mo talaga sana maturuan mo ako Jan!!! Keep up it up!!! More power!!! Marami nako itatanong syo!!! Two thumbs up👍👍 in innovation and creativity!!!
pm mo lang ako kung may tanong ka
Awesome video could you take an old dirt bike tear it down put a mid Drive motor on and make a video of it love to see that and I know you could do it well thanks from Texas
Never fail to amaze me.
th-cam.com/video/M44C9z_wmI8/w-d-xo.html
Awesome!. I would highly recommend using a stronger bike for those speeds.
Great use of old parts to make something cool.
Battery box looks a bit dodgy though.
Your Technical skills Awesome.
Wow Amazing speed! Do you need to modify the controllers & motors. Thanks
astig talaga. range test n yan idol.
I liked your work. can you tell which application is the one that measures speed?
you are a genius you transform trash In something great! I want to be like you! :D
Excelente video. Pero que buena veloxidad desarrolla!!👍
De Filipinas velocidad y kilometros. Mi gustas comentos. Diós té Bendiga.
Nice build, how long does a charge last? time or km, I'd like to hear back. Winter just hit in Canada .I need a winter project.
Did you use one throttle for both controllers or two? If just one how did you wire it to two controllers?
have you tested how long the batteries last before recharge on full speed?
What is top speed
Nice and clean work.
Ok na ok yang lifo 32650 boss mas reliable at hindi pa delikado unlike sa 18650 na madaling sumabog kng tatangatanga ka sa pag assemble lol! Great video thumbs up!👍👍
ang husay mo brod!
should i try this if i know very little about electricity ill need a hoverboard ... well all i have is a bike i can use (so if they are easy to access and cheap why not)
Classic I'm from Kazakhstan
👍👍👍
Hi, I'm Fabio,
congratulations, great job, great video.
A curiosity with LiFePO4 batteries, do they work well on e-bikes? Many advise against them, they tell me to wear Liion. These 36250 what make and model are they?
Pa give away mo na yan sir hahaha loyal subcriber here haha
Tindi boss! Parang yan na yata pinakamabilis mo na nagawa! 👊
sa ngayon yn nga pinaka mabilis na nagawa ko.. hehe
Keep up the good work👍
Лютый колхоз. НО! Этот колхоз работает без токарки, без центровки и едет. -Едет Карл! в то время когда я сижу на жопе и не хрена не делаю. Лайк однозначно
Wah mantap baget bosku
Sweet pal nice build
The maximum speed is flat with two 350w motors?
I hope you add a little info on the motors and batteries, but very cool!
ok I'll update.
th-cam.com/video/M44C9z_wmI8/w-d-xo.html
@@albertnario4877 Your work is innovative. Could I please get your phone number? I need some worthy tips from You regarding My project.
m.me/albert.nario.1
@@realfamilyman I borrowed diagram on my other video, just remove one motor and controller and your good to go.
Nice work please how did u make the measurement
great project again dude..no range test this time?
Wow it's amazing how long the battery last?
In your schematic diagram it has 3 motors where was the third motor mounted. I just notice two hub motors. 1 for the front wheel and 1 for the rear wheel. You didn't have a mid drive motor/ i don't think so.
just remove one motor and controller, I just show you can add more motor in one throttle
@@albertnario4877 more motor and controller with one throttle :)
@@purafajro thanks
Hey Nario, can you please send link to your battery source for this build thanks
Husay as always!
Nice what kind of battery's you use.
What kind of cells did you make your battery pack out of nickel metal hydride if so I haven't seen that before and I'm curious how it worked out for you long term. The more dollars than sense I want what I want and I don't care how much it cost mindset is predominant but doesn't work for all of this and they're always going to choose lithium ion and the budget conscientious most bang for my buck DIY minority often chooses lead acid batteries that are safe and proven effective but heavy as hell I figured there's probably something middle-of-the-road that works just fine for those of us looking to save a few bucks (more out of necessity than anything else) but aren't willing to double or triple the bikes weight by using lead acid batteries and requiring some decent range so hopefully you'll get back to me on that because I haven't started my build yet specifically because I haven't worked out all the details and I like to have everything settled and planned out start to finish before I even begin so thanks in advance for your consideration to this request.
someone needs to teach you guys how to make a work bench or even just a table.
cool 👍🏻 pwedi po mag pagawa niyan😃
pede nmn.
how many watts does the motor can handle?
can you do a test going uphill instead of downhill and with no accelerating video??
What is the range of this battery pack please
Buona sera Albert.
Come posso inserire il bloccaggio del freno a disco,sul motore della bici?grazie
Good job brother 👍👍👍
Well done!
Show de bola parabens
Nice project
I want to build my own
How much that's it costs?
Where did you buy all the materials you used?
Thanks looking forward to you reply
Stay safe
Hi nice project have you change the coupling of the motor i mean star or triangle? And what is the voltage of the battery
Congrat for this awesome job would be real fun to ride
72volt
Galing Talaga ni Sir...
Magkano Inabot Kaya?
Sir pwede po pa indicate ng mga parts na inspired po kasi ako.
Husay mo brod God bless
Una idea muy buena pide mejoras lo digo por las bridas pero el creó que el resto está bien
This is the best adaptation of hoverboard motor so far ⚡👍⚡
Good jobbb
Very nice well done 👍👍👍
Ok I missed the part where you got the motor?
Need 2 controllers for 2 motor, Or is possible use only one for 1000w?🤔 Thanks in advance for your answer
1 motor 1 controller..
بعد التحيه .. موتور الهافر بورد لم ياتي سرعه الا 25 كم/س فكيف احصل على سرعه 60 كم/س ؟ ولكم جزيل الشكر
video nice battery how many volts how many amps?
Very good idea
Hi why 3 controleur for 2 motor?
Good job
Nice Bro!!!
nice
nice build, amazing howmuch you can do with hoverboard motors. how many volts is your battery pack this time?
I don't know what language you speak , I'm in Russian , I write through a translator . Please tell me , how many volts is the battery ? and what is the power at the start ? are the engines warming up ? I have strong doubts that 2 300-watt motors can accelerate up to 60 km. I can't get more than 35 km , 20-inch wheels .
Для русских перевод : Не знаю на каком языке ты говоришь , я на русском , пишу через переводчик . Ответь пожалуйста , сколько вольт батарея ? и какая мощность на старте ? моторы греются ? у меня сильные сомнения ,что 2 мотора по 300 ват могут разогнатся до 60 км. у меня больше 35 км не получается , колеса 20 дюймов
We're Filipino and we speak Tagalog mix with Spanish dialects. Althoug I cannot answer your technical questions, there were Filipino teacher in Russia who teach Tagalog that I saw in yt. A friend of mine Vsevolod Kotelnikob has yt channel about Rinzler Bikes.
Gumagaw Ka sir ng electric bike pwede ba i comvert ang road bike ko sa elictric bike how mjuch the cost tnx
What's the size of rim? 20 or 24 or?
grabe nmn bilis nyan. ano po top speed saka milerange? 350v ba makina nyan?
Bro, where is your shop?
two equal engines will not increase the speed but maybe if the autonomy increases
🌞👍I live high in the mountains with 50-70 ° climbs and am going to build an e-bike with a gearbox so I can climb mountains. Unfortunately, there are still no batteries with a charger for 100-150 km. But the future is not far off. I think that soon there will be mini-power plants based on cold nuclear fusion, invented by Yugin Malov, then the possibilities will be different. ☀️
Could you provide more specs for the bike in the description please? In particular, it would be nice to know the:
- Voltage (24, 36 48v?)
- Max Speed (Assuming it's 66kph or 41mph?)
- Max Power (Watts when traveling at max speed)
- Motor rated power (if you know it)
- Range (whether it be average, maximum, or minimum would help)
- Battery Ah or Wh
I would like and subscribe if you added these, thank you.
Genial!
Awesome 👌
Seriously. That was outstanding. Thanks for making this.
Ok felicitari
wow. mga parts po ba. nabibili sa lazada or shopee?
Ang lupet. No BMS?
could you have welded spokes to the rim
aL, ano kaya makagawa ka rin ng gañan , quad nmn. Apat na hoverboard motor bale 4WD. Lakas ñan paakyat ng Mt. Samat.
English:
I may suggest to have you make a quad someday with 4 hoverboard motor as 4WD. That is so strong it may climb Mt. Samat.
That thing does not look like it could handle those speeds on that road for long. Also looks like it's gonna shake you apart from the vibrations.
Так ниче шлифует если приподнять🤣🤣🤣 66км/ч с горьІ тоже норм...
40mph not bad 👌😁
Bro Upload Public reaction video
That's what you call "use what you have"
When the wheel diameter triples, the motor torque decreases 3 times. And with a voltage of 48 volts, the hoverboard motor rotates 1000 rpm, which with a 24-inch wheel must reach a speed of 115 km on no load, when it can only reach 64 km, which means that the motor operates at a low efficiency and releases a lot of heat loss. Burns. 18 amps are given to the motor all the time. 18×48=864w
which half of that waste as heat.
this hoverboard motors are not made for direct drive on large wheels. they have high rpm and low torque.
very true but its more fun when things blow up!
@@10OZDuster so you like this guy:
electroboom
th-cam.com/video/-xpR2L6wcig/w-d-xo.html
What size of wheel frames did you use?
20in wheels
You should be careful welding with those Mickey Mouse gloves they're liable to catch on fire