This video is a perfect example of why I started watching this channel! The man has all the tricks to improve a saw’s performance…AND HE SHARES THEM WITH US👍🏻
Yesss finally some muffler tests. I’m excited to see some of what you do and tests fails and what works. Your doing great bro. Love this. Kindness and love.
Jeremy, i thought the same thing in the first video, It didnt pull that hard. And i think your right. It improved it. You hit the nail on the head. Those questions on how to change the timing were all ways in my mind. And credit given where credit due, You explain things in away that i can understand. Thanks for that
Your knowledge is incredible. I watch all of your videos and you always amaze me with your talent. Thanks for taking your time to share just a spec of your knowledge with us. It has made a difference in my life/job and I'm sure many others. I usually don't post much, but when I do it is because it's real.
I have that same saw M10-10 used it for a lot of years I ported it out. Really like to raving the motor up for music too my ears but can't remember what the tooth count on the clutch was Great stuff i might have to pull it out GODSPEED
Hey Jeremy my flywheel nut backed out on my 700 pro mac, well as you can guess bad things happened as the saw was under load I had just got done rebuilding the motor new pistons seals etc. Anyway it chipped my crankshaft at the keyway slot didn't do anything I can see to the flywheel, and chewed up the keyway a little, my question is will a 610 keyway with jb weld on the crank and flywheel along with loc tite on the flywheel nut work or do I need to add a lockwasher?
Bellhopper I opened up my 610 pro mach looking for transfers to open up and it doesn't look like normal ones by the way it looks you can't do inthing to it to make it breth better.
Rippin good Bellhopoer!! My 10 10 has been running fine, left it alone for a week or two, now it just floods itself,, once in while i can get a sputter out of it,, but ususall6 just fliods itself. Has spark, not great mayve but shes blue! Any ideas?
Why does retarding the timing seem to pick up a Mac ? On my saws of several makes it seems like advancing the timing at the key always picks up performance and kick back of the rope occurs when going too far either direction. In my opinion all saws seem to be built to run on crappy gas so they have low static compression and conservative timing numbers from the factory. Seems like there's a sweet spot in the middle.
i have a pro mac 10-10s with 1 chipped fin on the flywheel .i have the little chipped off piece .can i repair it with some kind of epoxy/weld mix ect,,,or can i run it with that little chip missing ?
This video is a perfect example of why I started watching this channel! The man has all the tricks to improve a saw’s performance…AND HE SHARES THEM WITH US👍🏻
More innovation from the mind of the hopper! 👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏
Thanks for sharing your info with us
Wow ur a feakn mac genius!!! Love it have a good 1
Thanks ol boy I’m always learning something watchn this channel. Appreciation
Weather looks good with you.
Thanks Hopper. I have one of those that need rework. Will continue following.
Oh yeah, she rippin very nicely 👌 😀
Another great video.
Helloooo Bellhopper hope all is good with you and the family.
I like that distinction: "How To" vs "How I Did It" ... well said.
Woo hoo!!! Awesome job!!
👍👍I truly like these type of vids
Test and tune has helped me get better at what I’m trying.
Yesss finally some muffler tests. I’m excited to see some of what you do and tests fails and what works. Your doing great bro. Love this. Kindness and love.
Nice! Love it Bellhopper! Runs and pulls awesome
Jeremy, i thought the same thing in the first video, It didnt pull that hard. And i think your right. It improved it. You hit the nail on the head. Those questions on how to change the timing were all ways in my mind. And credit given where credit due, You explain things in away that i can understand. Thanks for that
Your knowledge is incredible. I watch all of your videos and you always amaze me with your talent. Thanks for taking your time to share just a spec of your knowledge with us. It has made a difference in my life/job and I'm sure many others. I usually don't post much, but when I do it is because it's real.
Simple yet effective, gotta try that on a couple of my saws, thanks!
Good stuff!
Hoppernation!!!
Hey buddy
I have that same saw M10-10 used it for a lot of years I ported it out. Really like to raving the motor up for music too my ears but can't remember what the tooth count on the clutch was Great stuff i might have to pull it out GODSPEED
Done a pretty good job bud!
I have a feeling there is going to be a whole lot of racing at the next hopper stock!!
Lol friendly compation lol i just want to unlock some secrets
Hey Jeremy my flywheel nut backed out on my 700 pro mac, well as you can guess bad things happened as the saw was under load I had just got done rebuilding the motor new pistons seals etc. Anyway it chipped my crankshaft at the keyway slot didn't do anything I can see to the flywheel, and chewed up the keyway a little, my question is will a 610 keyway with jb weld on the crank and flywheel along with loc tite on the flywheel nut work or do I need to add a lockwasher?
U and BUCKN HAS TAUGHT A MEMPHIS TN CAT ALOT ABOUT SAWS I WOULD LOVE TO MEET BOTH YALL ONEDAY
Bellhopper I opened up my 610 pro mach looking for transfers to open up and it doesn't look like normal ones by the way it looks you can't do inthing to it to make it breth better.
I would have to look at them ive never ported one of those buddy
I would love to have a saw SIGNED BY YOU
like watching,is that his last name?
Rippin good Bellhopoer!! My 10 10 has been running fine, left it alone for a week or two, now it just floods itself,, once in while i can get a sputter out of it,, but ususall6 just fliods itself. Has spark, not great mayve but shes blue! Any ideas?
Why does retarding the timing seem to pick up a Mac ? On my saws of several makes it seems like advancing the timing at the key always picks up performance and kick back of the rope occurs when going too far either direction. In my opinion all saws seem to be built to run on crappy gas so they have low static compression and conservative timing numbers from the factory. Seems like there's a sweet spot in the middle.
🔥🔥🔥🔥🔥💛💛💛💛💛👍🏼👊🏼
i have a pro mac 10-10s with 1 chipped fin on the flywheel .i have the little chipped off piece .can i repair it with some kind of epoxy/weld mix ect,,,or can i run it with that little chip missing ?
Did that def pull harder after retarding the timing hopper? Nvm, just finished the video and you answered that question Rite after i made this comment