Resin artist here! First, make sure you work in a well-ventilated area. Second, please wear gloves. 0:36 - the purple stuff is a diy silicone mold. I do not recommend pouring resin that deep without layering. It will get super hot and may not cure. 1:01 - not all resins will be in that state after just one hour. Some will be completely hardened and some will still be fully liquid. And please wear gloves when handling resin that isn’t fully cured. 1:29 - any food with a high moisture content will rot. I Don’t recommend putting food of any kind in resin, but definitely not anything with moisture. This advice extends to the next craft also. 2:03 - I have no idea how well that would de-mold. Pringles cans have cardboard inside, i think if you somehow managed to get it out it would be covered in cardboard. Resin sticks to everything but silicone and certain plastics. You can buy silicone molds in the shape of a cylinder like that and just put your chips in there. Chips are dry, so it should be alright. 2:16 - drying the fruit should be fine. I Don’t know how to dry fruit, so I don’t know if they did it right, but if you’re able this should work fine. 2:38 - make sure the surface you do this on will detach from your resin. 3:14 - if you want this table to remain level, make sure you have the exact same length of resin for each leg. 3:23 - unsure if resin will detach from playdoh. You could do the diy silicone mold for this to ensure it works. 3:44 - they didn’t tell you this, but that was UV resin. The purple glow was the UV lamp to cure it. You can paint on resin, I would recommend a layer at the very bottom also and a final layer on top. 4:21 - they used alcohol ink, but a very similar effect would be achieved with mica powder. 4:47 - we don’t see them seal the bottom. Also, the resin may not de-mold cleanly. 5:08 - I Don’t know why you would want to do this, but do it in layers with silicone bowls. 5:54 - no. I would refrain from using resin with food. I’m sure you could find food-safe resin, but be careful regardless. 6:15 - I have no idea how they thought that would cure. The resin will drip to the bottom because epoxy resin takes longer to cure. It may work with UV resin. 7:00 - that looks like a real flower. It will die. 7:15 - that was UV resin. I have never seen resin break like that. 7:32 - just buy a chessboard mold. That is unnecessarily difficult. 7:54 - more diy silicone! Please cure your resin in layers. 8:31 - you can keep bubbles from forming under the flowers by first dipping them in your mixed resin. 9:04 - they used alcohol ink. 9:25 - depending on the plastic, this won’t even detach. You could do the diy silicone thing again. 9:48 - that’s gold foil! 10:21 - hot glue should work. Or you could make your own silicone mold, like a normal person. 10:45 - that… was not Resin. 10:53 - WHERE are your GLOVES? 11:20 - that must stay in the plastic. That will not demold. 11:32 - those dyes in the candies will bleed. 12:22 - they make resin tape that will definitely peel off and serve the same purpose. Do this on a silicone mat. 13:38 - please wear a respirator if you sand resin. 14:23 - hm….. I hope this helped you in some way!
It looks so amazing/beautiful /shinny It can follow and make it easily And it's useful in daily life The tutorial is so wonderful.Learn new from it and thanks for sharing
2:53)My favorite😍👍💜💜💜💜💜
I'll give this 10/10
Literally, the Pringles broke my heart
Nice🌺🌺🌺🌺🌺
XXXXXXXXXXXXXX
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx no never no never m a n g o mango
SANAHABEGUM Sneha
@NO9Relax
Is there anyone who always watches but never tries😂just like me 😚
Yes, I am.
Me also
Me!
Ya meee😀😀
Yeah me 😃
Me encanta ❤️👌😍💯👌👌
J'adore c'est telement beau je n'ai pas les mots😊
Wonderful
뭔가 편안해지는 영상이네요. 힐링하고 갑니다^^
qi aaz
1:30 ❤
Просто суперски
Yessssssss
Very beatiful
WOW💖💖💖😍😍😍😊😊😊👌👌👌
Yeha bahut accha hai very nice
❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤i like it your
I love Canada ❤❤❤
Resin artist here! First, make sure you work in a well-ventilated area. Second, please wear gloves.
0:36 - the purple stuff is a diy silicone mold. I do not recommend pouring resin that deep without layering. It will get super hot and may not cure.
1:01 - not all resins will be in that state after just one hour. Some will be completely hardened and some will still be fully liquid. And please wear gloves when handling resin that isn’t fully cured.
1:29 - any food with a high moisture content will rot. I Don’t recommend putting food of any kind in resin, but definitely not anything with moisture. This advice extends to the next craft also.
2:03 - I have no idea how well that would de-mold. Pringles cans have cardboard inside, i think if you somehow managed to get it out it would be covered in cardboard. Resin sticks to everything but silicone and certain plastics. You can buy silicone molds in the shape of a cylinder like that and just put your chips in there. Chips are dry, so it should be alright.
2:16 - drying the fruit should be fine. I Don’t know how to dry fruit, so I don’t know if they did it right, but if you’re able this should work fine.
2:38 - make sure the surface you do this on will detach from your resin.
3:14 - if you want this table to remain level, make sure you have the exact same length of resin for each leg.
3:23 - unsure if resin will detach from playdoh. You could do the diy silicone mold for this to ensure it works.
3:44 - they didn’t tell you this, but that was UV resin. The purple glow was the UV lamp to cure it. You can paint on resin, I would recommend a layer at the very bottom also and a final layer on top.
4:21 - they used alcohol ink, but a very similar effect would be achieved with mica powder.
4:47 - we don’t see them seal the bottom. Also, the resin may not de-mold cleanly.
5:08 - I Don’t know why you would want to do this, but do it in layers with silicone bowls.
5:54 - no. I would refrain from using resin with food. I’m sure you could find food-safe resin, but be careful regardless.
6:15 - I have no idea how they thought that would cure. The resin will drip to the bottom because epoxy resin takes longer to cure. It may work with UV resin.
7:00 - that looks like a real flower. It will die.
7:15 - that was UV resin. I have never seen resin break like that.
7:32 - just buy a chessboard mold. That is unnecessarily difficult.
7:54 - more diy silicone! Please cure your resin in layers.
8:31 - you can keep bubbles from forming under the flowers by first dipping them in your mixed resin.
9:04 - they used alcohol ink.
9:25 - depending on the plastic, this won’t even detach. You could do the diy silicone thing again.
9:48 - that’s gold foil!
10:21 - hot glue should work. Or you could make your own silicone mold, like a normal person.
10:45 - that… was not Resin.
10:53 - WHERE are your GLOVES?
11:20 - that must stay in the plastic. That will not demold.
11:32 - those dyes in the candies will bleed.
12:22 - they make resin tape that will definitely peel off and serve the same purpose. Do this on a silicone mat.
13:38 - please wear a respirator if you sand resin.
14:23 - hm…..
I hope this helped you in some way!
beautiful ♥
Vos vidéos sont incroyables vous avez beaucoup de talents. Continuer de poster des vidéos comme toutes les autres 💖💖💖
İt is very good ideas. I like 5- minute crafts. Thank you for it videos❤️❤️❤️❤️❤️❤️❤️❤️❤️. Amazing 🥰
And lots of love and appreciation from India 🇮🇳
Perfect
Hi
Good
Great 🙂🙂
So beautiful and pretty
Beautiful
ładne 😀
Very nice
The baloon hack was just amazing
OMG,👌👍
Omai zing💯💯👍🏻
Sangat bagus💯💯💯
Uzbekistondan ham muhlislar bor
Vos créations sont très magnifique
Wow Amazing
Cool thanks
I love the calender the most ❤❤❤❤❤❤
I love the cherry blossom phone case
非常好的创意
Very relaxing and satisfying... cool bean..
And I also love the maple leaf stand
How beautiful!!!😱😱🥰🥰😍😍.
Wow so much nice 🥰🥰❤️❤️❤️💕💕💗💗😚😚😘😘😊☺️🤫🤫🤫😉😉🙃🙃
Nước đó là nước j vậy ạ ,hãy nói cho em biết đi chị
فكرة راءعة 👍👍💝💖
Good👍💖💖💖😍😍😍👌👌👌
КРУТО КОГДА ВЫ НА УЧИЛИСЬ В ДЕНЬ .
Todo muy lindo me encantó
First ☝☝☝
You know it's amazing how you find the art in every thing and how you turn it in to something beautiful!
ো
wow! I like it!!!😶😶😶😶
l from Uzbekistan ❤❤❤
I love your craft ideas 💡 it's nice 👍
افكار مذهلة،
Wow ❤️❤️❤️❤️❤️❤
beautiful
So cool❤👍
かわいいよ
Super ,💯💯💯💯💯💯
I like it❤❤❤❤❤❤❤❤❤❤❤❤❤
9:39 is so aesthetic!!!💜⚪💜
do you know where to but resin
Beautiful 👍
Gente eu amo essas peças com resina 🥳🙈♥️
😢😮😢😊
Super super super👌👌👌👌
Very good👍👌
hebat 😍😍😘
Very Useful ideas
👍 tq
So beautiful ❤️😍❤️😍❤️😍❤️
Love it!!
감동적인 영상
I like
Wow the hacks are amazing😍😍😍
5 minutes craft is awesome 👌
Lots of love from pakistan 🇵🇰
I really love these. They're so cool and satisfying to watch
Shape and artistic ability now
I tried all of these and they all came out very perfect and looked like
What material needs ?
What is the name of that liquid which forms into solid
please reply
It looks so amazing/beautiful /shinny
It can follow and make it easily
And it's useful in daily life
The tutorial is so wonderful.Learn new from it and thanks for sharing
At least it will keep me away from boordem
super and beautful
Wow so beautiful i love it
Great artist👨🎨
This is very cool
Helloo🥰🥰
Wow amazing 😻
So cool
it's really helpfull!
where do i but rresin
Best ideas
perfect
WAW 🎉🎉🎉🎉🎉😊😊😊😊😊❤❤❤❤❤❤
Veru good 👏👏👏😘😘😘👍👍👍😊😊😊
WOW 😲😲😲😳😳😲😳😲😳
class!😍 Very beautiful!🤩👍👍👍
Wow so cool
First☝☝
❤❤❤
❤️
Very beautiful
💜💙💚
👌👌👌
super very very super Kay's beauty✨❤
Wao😮😮😮😮😮😮
I love this bgm...❤️😍
What is the title of the music background in the first place?🥺
hello i'm happy to make special tricks of you guys thank you so much for everything thank you
hallo
where do i btu resin
Hello that liquid name please🙏