Looks good, nice work 👍🏻, what about an option of instead of the red line going across (in daylight - lights off) having it tinted so it gives the appearance of the factory look until the lights are on (Or when braking, if connected) ?
@@L663 you get that done asap please need to buy :) . If it's black but lights up at night that's awesome. Please don't make it look see-through or it will look a little riced.
Great clips and it looks good but it's just a shame the red part of the light bar isn't clear to blend in with the rear light clusters. Maybe you could ask the manufacturer if they could do a clear light bar with red led's.
Yes its one of those idea where you think "why has no one done this before ?"... lucky for us we are the first ! ( there is one for the L405 that has just come onto the scene but its $$$$ )
Just fitted this . Looks great. I found the choc blocks to not do the job properly. So soldered the wires white and black wires to the two black wires . Wrapped in insulation tape. Really a two hour job if you take your time and think it through. Threading through the drilled hole is fiddly but I found by tapeing all wires together and pushing through with end of a coat hanger helped to feed the wires through. Will fit brake light this weekend
Hi Guys Really helpful video just fitted this light, as well as rear light upgrade and mirror dynamics, looks really good 👍😁 Just 1 thing, when I was following the wiring of this I got confused at first with where the positive and negative were going as mine looked slightly different, turns out the box the plugs are in where you wire to on yours Is upside-down, thought I'd better mention incase people accidentally wire to wrong wires. Hope this makes sense 😅 Thanks for this though looks brilliant really happy 😊
Yeah my box is upside down the videos one, but haven’t been able to work it out , tried manually and with the blocks but won’t come on , do you know if connected with inverted cables would this brake the led ?
Great job! Power down sequence is nice. Need this for my murdered out L405 LWB though...would love an ETA? If released I'd just wrap it in VViViD Air Tint Smoke Tail light / Headlight Film to give it a smoked look! Have this stuff on my RR already, works great on smoking headlights and tail lights plus it's MOT friendly!👌
Fitted mine today. Looks brilliant and I think also looks better with the pre-facelift rear lights. Once I drilled the hole, I found it easier to feed the cable towards the edge of the boot lid. At 9:07 in the video, I fed it towards the large hole to the right of the shown connectors, and then ran it along the black loom. I'll email you a picture Simon.
Love the channel so much details you guys give on all your videos 😊 ... Question will this LED strip fit a L405 because I would love too put it on mine 😅
I have bought all my upgrades from you guys for my 2014 Evoque. I have the Facelift Rear Lights - 'Black Edition. If you were to get a smoked edition of this light for my Evoque, it would compliment those lights no end. I too would buy in a heartbeat !
Looks great but as others have said would be cool if it was smoked or invisible, maybe make the whole outer edge the same material so you cant tell there is a light behind, it possible to make it flush like the OEM bar and no have the spolier effect using that method? For the brake light connection would it be possible to add in a wireless on off sender to one of the LED rear light clusters, and receiver on the bar to trigger when the brake light is on to save having to get to the LED brake light in the Roof Spolier? Also do the LED's get brighter when breaking if both features are selected
I need back in stock yet I just got my GL5 tail lights i’m looking for his part and smoke is the only reason why I didn’t purchase the red one and they always out of stock when are you going to restock and ship to the USA
Hi! When will you be posting what to do with the red wire? I have just placed an order on this and want to get it all fixed in one go, so would appreciate you guys post this as soon as possible
Hi Shalmon - just incase you did not see this here is the video for the brake wire th-cam.com/video/JsuxAdp-bTI/w-d-xo.html Did you get your lamp ? installed it yet ?
Hi Jordan.... why did I expect you to make this comment ! You will be pleased to know its well progressed in the design stage and tooling has already been started for the Evoque.
I would love to do this mod, but the intrusion into the rear camera image is a no-no. Maybe do a version with a small cutout for the camera? Or can we change the camera as well to the version that doesn't have the intrusion?
Is it true that this model, for the L494, is defunct? I'm getting a 404 when I try to access the page. I bought this a year or so ago and finally getting around to installing it, thanks for keeping this video up, very helpful. Why did you all discontinue? Manufacture stop supplying? Bad quality overall?
After watching this video I brought this item, installed it and it looks great, but I was wondering if you have a video that shows us how to connect it to the break light? Thanks 👍
I like this but not keen on Scotch-Lok connectors - especially on those thin wires as it will cut them in half. Is it possible to have an in-line t-connector that fits the socket?
That’s really good, bought one yesterday could you do video on how to connect brake light facility and what CMS route you used CMS = cable management system
@@TheDrago1882 The gloss black is the moulded plastic finish not painted - its the polished mould service that gives the gloss finish - so its going to be tricky to offer matt black unless we get it painted or wrapped ?
Great idea as always Simon. As said by a few people you need an optional smoked version and for all the RR range that have the strip across the tailgate. Top man 👍🏽😎
Hi 🙋♂️ this is really great 👍 upgrade and my favourite 😍 😍 please let me know is this available for L405 with silver my Range Rover trim kit is silver/ lettering. And is it possible in future to get a plug 🔌 and play much easier for some people. I am sorry 😢 if Thanks 🙏 🙏
This is our first version of this light and I agree we need to make the future ones easier to fit... There are some L405 versions in China but not made by us. We have the Evoque version in design now... if sales are good the L405 will be close behind !
Just received my LED light bar and based on this video, it looks like the most difficult part of the install is the wiring. I have watched the video over and over and it looks like Tyler is a bit far from the wire housing so where can wiring diagram online or color images you have available of the final wiring sequence? Just want to make sure I attach the wiring correctly.
Cracking new item and will be on my shopping list when I change to a Sport. Think it’s already been suggested, but a smoked version would be really good so the red light only shows when turned on. By any chance is the brake light animated as well???? 👍🏻👍🏻
Please for the love of the Gods, make something similar for L462 Discovery, it has the worlds crumbiest brake lights and this is very much needed, IMHO. Great product 👍🏻
Would be reasonably straightforward for older L462, but the Mid-Cycle refresh version has the "Discovery" nameplate lettering on that piece of trim you would replace. 🤔
Hi Richard - Brake light sorted today and sales are really good ! wont be happy till we get some good feedback from customers....thats what really matters. Here is the brake connect video..th-cam.com/video/JsuxAdp-bTI/w-d-xo.html
This would be perfect if it was smoked and only came on when the lights are turned on. Looking forward to buying one when you guys have the final concept down!
Hi, I have a L405 and would be interested if you developed a light bar for this. BTW I have just fitted a 32” LED light bar behind the grill of my L405. It’s stealthy and my god does it throw out some light! Easy to fit as LR have helpfully put everything in place you need to get the job done.
Yes my box where the white black cables go is also upside Down , tried the blue scot box to connect and tried manually but can’t seem to get it on , can you not just connect all to the plate light ?
You can connect the earth and light wire to the number plate light - but the 12v power feed you need to find a power feed really - it may work on the light wire but you will not get a power down sequence.
Hi. Absolutely love your channel. I have learned so much from you. I have water running out of the boot lid latch when I open it, after washing the car, or it has rained. I have been told on the RRsport forum that you have made a video of how to fix it. Please help. I hate getting water down the back of my neck. Thanks Dave.
Hi , They are not available to buy on your website I guess they're out of stock. Could you update when they will be available on your website again to buy, really need one with reverse camera Thanks
Bought and fitted - looks superb! Agree that smoked would be cool but if you put red accents like side grill bars, this looks awesome. Defo think smoked rear light set is next on the list. too. 2014 L494. Top part of the reversing camera is obscured by the spoiler effect. Appears to be enough visibility to see things directly behind still. Fitting was straightforward-ish. 2 hard bits: (a) feeding the wires through. I drilled an 8mm hole - go with the recommended 10mm. Grommet fitted ok after a bit of wangling. Also could not get through to the space on the video. However, plenty of wire to feed everything to right and circle back (can take a photo of needed). Mini cable ties a god send; (b) tail light connection (green wire): definitely needs care per video. With mine it didn’t work first time but a bit of wangling the wire in the scotch bloc and it made a connection. From there all good now. [will update again once driven at night]
Hi Adrian.... I am keeping an eye on the comments and looking for someone to fit it and check its all good... have you tried it at night yet ? Glad your happy with it. Agree about the red accents...it matches the red SPORT badge on the rear of mine.
@@adrianbarnett2912 OK noted - will check the reverse image on mine. The scotch block connectors are not great - we soldered all connections in the end for reliability. Dis you see I have posted the brake light connect video... but its a bit tricky ! th-cam.com/video/JsuxAdp-bTI/w-d-xo.html
Rather than having to drill a hole in the tail gate for the wires to go through, you could of sacrificed one of the clip points and repurposed it as the hole for the wires. If that idea would have made the new part not fit as tight, maybe try keeping the clip point but halving its size so it only takes up half the hole, therefore the other half of the hole could be used as the wire pass through. In my short time of tinkering with cars, I’ve noticed a much bigger market for plug and play parts rather than having to modify the original to make the new part fit. I know the wiring is still a splice together task, but that’s a lot more of a reversible process than having to drill a new hole in the tailgate. I might be very wrong in my opinion, to which I say... ignore me and keep up the good work. All the best chaps.
Hi - you are 100% correct and we are evolving this product as we speak ! Many of the best ideas we get are from users and contributors... see my video this week on the "Barclay Hinge" Evoque bonnet lettering.
We are having problems with the rear lights... some supply issues and some quality issues ( mostly condensation ) - we are pressure testing them in house to try and reduce issues at customer and working with the supplier to improve.
@@L663 So, I’m excited to say that Kate got in touch today and I’m due to receive one of the limited 2nd batch of rear light bars. You mentioned and were very open about the issues with the first batch. I’m assuming you’re happy with the latest ones and I’ll let you know if I experience any issues. All I need now are the 2018 rear lights (your sweeping version, not the OEM ones) Do you have any idea when these are likely to be in stock?
@@paulverney4753 Yes we are releasing the 2nd batch slowly and we have resolved the leak issue and done some testing so we are much happier with the product. Please keep us informed how you get on.... also give Kate an E Mail as i found a pair of lights in the warehouse that she can sell you..if she still have them
@@L663 Thanks Simon, I’ve dropped Kate a message. I’ve fitted the light bar to my MY2015 RRS with the original OEM lights. Would you like a photo to show buyers what they look like in this config?
Hi Miles - thats probably a good idea... Julian leads this team and he very much works in the shadows..... maybe i need to shine a light on him and his work.
Does it come full black (like the original one) rather than with the visible red strip, with integrated red ilghting? That would look better imo when the engine is off, especially with the full black tail lights. Great job and cool channel!
Hi Jordan - our number 1 Evoque fan ! Here is the video of wiring up the brake lights th-cam.com/video/JsuxAdp-bTI/w-d-xo.html We decided the Evoque one will not have the brake light to keep install simple we are just going to use the rear number plate lights as the feed
Still showing these are SOLD OUT??? I haven't seen these in stock in months, are you all going to get in more stock soon? Buyers are ready out here, lets get logistics back on track soon.
@@L663 Annnnnnnnnnnnnnnd purchased this morning, thanks for the heads up!!! Very much looking forward to video taping the box opening, installation and testing on my 2014 L494. Now just need to find a nice set of 2018 NAS upgraded tail lights that correctly turns off the red light when the indicator is on, wish me luck, haha.
Hi - firstly i am flattered that you would let us work on your car ! but alas we are not set up for customer fitment.. a customer fitting centre is something we are considering for the future !
@@L663 Thanks for your reply - if you do decide to offer a service like this in future please do let me know as I am not sure any of my local garages would have any experience of working with the trim on a RRS. Can you do an easy fit strip like this for the Evoque 2017 too please! (:
The car looks great, but I’m going to ask you of your opinion regarding the reliability of the SDV6 engine that I’ve read about ( crankshaft snap) which must be a concern for all L494 owners! I’m a RRS owner (tdv8) L320 and I would love to buy this later version and upgrade with some of the amazing bits you provide BUT until LR admits a fault and promises to fix all Crankshaft failures I won’t be buying 😕
Looks good, nice work 👍🏻, what about an option of instead of the red line going across (in daylight - lights off) having it tinted so it gives the appearance of the factory look until the lights are on (Or when braking, if connected) ?
Yes got a few people asking for this and this is something Julian is working through with our manufacturing partner.
@@L663 Now i feel like i should have waited instead of buying it! SAD FACE
@@L663 you get that done asap please need to buy :) . If it's black but lights up at night that's awesome. Please don't make it look see-through or it will look a little riced.
Agreed. Was thinking the same thing
@@L663 still waiting for the results of this
Fantastic top quality product. Took about 45 mins to install after watching Simon's install video. Thanks guys
Make a smoked version, and I’ll buy that and the tail lights in a heartbeat.
Me 2!!
3
still waitinggg
Three years later...
Great clips and it looks good but it's just a shame the red part of the light bar isn't clear to blend in with the rear light clusters. Maybe you could ask the manufacturer if they could do a clear light bar with red led's.
We are working on a smoked bar... also I did this video a while back so the whole Brexit thing was quite new
What a brilliant upgrade, looks superb and factory OEM in appearance.
Agree, great upgrade
Yes its one of those idea where you think "why has no one done this before ?"... lucky for us we are the first ! ( there is one for the L405 that has just come onto the scene but its $$$$ )
Love this for the Evoque👍🏻
Hi Simon,
Will you be making these for other models i.e. evoque ?
Just fitted this . Looks great. I found the choc blocks to not do the job properly. So soldered the wires white and black wires to the two black wires . Wrapped in insulation tape. Really a two hour job if you take your time and think it through. Threading through the drilled hole is fiddly but I found by tapeing all wires together and pushing through with end of a coat hanger helped to feed the wires through. Will fit brake light this weekend
Hi Guys
Really helpful video just fitted this light, as well as rear light upgrade and mirror dynamics, looks really good 👍😁
Just 1 thing, when I was following the wiring of this I got confused at first with where the positive and negative were going as mine looked slightly different, turns out the box the plugs are in where you wire to on yours Is upside-down, thought I'd better mention incase people accidentally wire to wrong wires. Hope this makes sense 😅
Thanks for this though looks brilliant really happy 😊
Can you make one for the L405? :)
Yeah my box is upside down the videos one, but haven’t been able to work it out , tried manually and with the blocks but won’t come on , do you know if connected with inverted cables would this brake the led ?
Looks great, love to see more products, upgrades for the Discovery Sport.
Totally agree
These are gonna sell massively!!!
We think / hope so - the car really lends itself to this modification and loads of new cars have this feature. Thanks for the support !
Can’t believe how easy they pop off! I’d be terrified if I had a carbon fibre one!
Great job! Power down sequence is nice. Need this for my murdered out L405 LWB though...would love an ETA? If released I'd just wrap it in VViViD Air Tint Smoke Tail light / Headlight Film to give it a smoked look! Have this stuff on my RR already, works great on smoking headlights and tail lights plus it's MOT friendly!👌
Fitted mine today. Looks brilliant and I think also looks better with the pre-facelift rear lights. Once I drilled the hole, I found it easier to feed the cable towards the edge of the boot lid. At 9:07 in the video, I fed it towards the large hole to the right of the shown connectors, and then ran it along the black loom. I'll email you a picture Simon.
Love the channel so much details you guys give on all your videos 😊 ... Question will this LED strip fit a L405 because I would love too put it on mine 😅
Brilliant idea, excellent instructions, looks fantastic, thank you!! Fitted & finished in under half an hour easily!
Fantastic!
I have bought all my upgrades from you guys for my 2014 Evoque. I have the Facelift Rear Lights - 'Black Edition. If you were to get a smoked edition of this light for my Evoque, it would compliment those lights no end. I too would buy in a heartbeat !
This would look amazing on an evoque... any future plans for getting some made for EVOQUE 2012+
That already in design....
@@L663 . . . maybe VELAR to ?
Looks amazing! I’d love to install one of These on my 2016 Evoque if you create one in the future!
Please do the brake light video. I purchased this light, it’s amazing!
This is done its here - th-cam.com/video/JsuxAdp-bTI/w-d-xo.html
Please bear with us as we work out the sealing issue.
Looks great, what ‘security’ feature does it have against theft, looks too easy to remove...? Or, am I mistaken? Thanks for the video!
Looks great but as others have said would be cool if it was smoked or invisible, maybe make the whole outer edge the same material so you cant tell there is a light behind, it possible to make it flush like the OEM bar and no have the spolier effect using that method? For the brake light connection would it be possible to add in a wireless on off sender to one of the LED rear light clusters, and receiver on the bar to trigger when the brake light is on to save having to get to the LED brake light in the Roof Spolier? Also do the LED's get brighter when breaking if both features are selected
We did the Brake wiring today - its not that bad....there is a demo at the end too !
th-cam.com/video/JsuxAdp-bTI/w-d-xo.html
That should be a sure fire must have for owners of these Range Rovers.
I need back in stock yet I just got my GL5 tail lights i’m looking for his part and smoke is the only reason why I didn’t purchase the red one and they always out of stock when are you going to restock and ship to the USA
I would probably have the finish more "smoked"
Hi! When will you be posting what to do with the red wire? I have just placed an order on this and want to get it all fixed in one go, so would appreciate you guys post this as soon as possible
Hi Shalmon - just incase you did not see this here is the video for the brake wire
th-cam.com/video/JsuxAdp-bTI/w-d-xo.html
Did you get your lamp ? installed it yet ?
@@L663 no not yet, just haven’t had the time. I hope it will be this weekend
any updates on this yet back in stock?? usa buyers
Nice. Would like to see on the on the Evoque. Also maybe with this brake feature you're mentioning
Hi Jordan.... why did I expect you to make this comment ! You will be pleased to know its well progressed in the design stage and tooling has already been started for the Evoque.
@@L663 Freelander 2?!
@@L663 sounds great! Hope you guys are staying safe and doing well!
Sold out already! get em back in the store asap
Hi - we are having a few technical issues with the first items we sold - a water ingress issue - it will be resolved soon and back on sale !
That looks fabulous! Great bit of design.
Many thanks!
I would love to do this mod, but the intrusion into the rear camera image is a no-no. Maybe do a version with a small cutout for the camera? Or can we change the camera as well to the version that doesn't have the intrusion?
Is it true that this model, for the L494, is defunct? I'm getting a 404 when I try to access the page. I bought this a year or so ago and finally getting around to installing it, thanks for keeping this video up, very helpful. Why did you all discontinue? Manufacture stop supplying? Bad quality overall?
After watching this video I brought this item, installed it and it looks great, but I was wondering if you have a video that shows us how to connect it to the break light? Thanks 👍
Here you go
th-cam.com/video/JsuxAdp-bTI/w-d-xo.html
Next step is to build the taillights which just extend this line to the sides, instead of going down. That would be from the future 😄
I like this but not keen on Scotch-Lok connectors - especially on those thin wires as it will cut them in half. Is it possible to have an in-line t-connector that fits the socket?
Do you offer a retro rear camera washer jet as mine does not and would be a good thing .
That’s really good, bought one yesterday could you do video on how to connect brake light facility and what CMS route you used CMS = cable management system
Sorry for slow reply - this video is in the listing but here it is
th-cam.com/video/JsuxAdp-bTI/w-d-xo.html
Looks great, as others have mentioned. A tinted version of the red lense would be perfect 👌
OK we hear you..
@@L663 a satin black option would be handy aswell for those of us with the stealth pack if possible.
@@TheDrago1882 The gloss black is the moulded plastic finish not painted - its the polished mould service that gives the gloss finish - so its going to be tricky to offer matt black unless we get it painted or wrapped ?
@@L663 not the end of the world, can just get it painted before fitting 👍🏻
Great idea as always Simon. As said by a few people you need an optional smoked version and for all the RR range that have the strip across the tailgate. Top man 👍🏽😎
Yes I hear you... we are heading in that direction.. and the Evoque is next.
That’s great well done. Is there anything on the planning table for the vogue 2018..
That looks amazing.... a lot of time effort and money went in to this.... it will be a good seller I'm sure
Hope so!
Looks good! Would be good to maybe have a connector or Y splitter to piggyback off the lights so it’s full plug and play?
Suppose that would mean a bigger hole for a connector though, was thinking it maybe easier to go off a rear light then back through the spoiler
@@SimonBetty Yes but we could do some sort of improvement to make easier to fit... let me think about it...
Have you thought of making one for the RRS L320 05-09 model like the RRT764-KIT or as an addition strip to that kit?
Hola como puedo conseguir ese barra de luces led hasta aquí en España? Gracias
I know you haven’t done the one for L405 yet. Would white LEDs be possible to add for extra light when reversing?
Hi 🙋♂️ this is really great 👍 upgrade and my favourite 😍 😍 please let me know is this available for L405 with silver my Range Rover trim kit is silver/ lettering. And is it possible in future to get a plug 🔌 and play much easier for some people. I am sorry 😢 if
Thanks 🙏 🙏
This is our first version of this light and I agree we need to make the future ones easier to fit... There are some L405 versions in China but not made by us. We have the Evoque version in design now... if sales are good the L405 will be close behind !
@@L663 I will wait I don’t trust Chinese but if you advice me I can take your advice not a problem I respect ✊ you.
Thanks 🙏
Is this product not available anymore on the Powerful UK website?
You've still got your European stars on the number plate. Tut tut 😁
Greeting my dear,
I do need one of that light bar smoked color for L494 sport 2014 please ASAP
I wanna see the brake light i was just thinking about doing something like this too mines
Just received my LED light bar and based on this video, it looks like the most difficult part of the install is the wiring. I have watched the video over and over and it looks like Tyler is a bit far from the wire housing so where can wiring diagram online or color images you have available of the final wiring sequence? Just want to make sure I attach the wiring correctly.
Did you sort it out ?
Smoked version please, i’ll buy straightaway
Cracking new item and will be on my shopping list when I change to a Sport. Think it’s already been suggested, but a smoked version would be really good so the red light only shows when turned on. By any chance is the brake light animated as well???? 👍🏻👍🏻
The brake light is just on and off.
Brake light video done today with demo at the end
th-cam.com/video/JsuxAdp-bTI/w-d-xo.html
has not been in stock for 7 months. Will it be available again or will it never come back?
Will be instock tomorrow
Yup. Loving that... 😁
Were can I buy a tailgate led light bar for my Range Rover 2018/03
Looks great, any future plans for getting some made for the L320 2005-2013 Range Rover sport?
Please for the love of the Gods, make something similar for L462 Discovery, it has the worlds crumbiest brake lights and this is very much needed, IMHO.
Great product 👍🏻
Would be reasonably straightforward for older L462, but the Mid-Cycle refresh version has the "Discovery" nameplate lettering on that piece of trim you would replace. 🤔
@@TimeLord86 talking the pre-refresh models. The brake lights are tiny outliers, almost an afterthought.
This is the upgrade i am still waiting for evoque l538. ❤️
That should sell well Simon...a very good idea and neatly fitted. I hope you can sort out the brake light aspect soon. 😃😃Richard
Hi Richard - Brake light sorted today and sales are really good ! wont be happy till we get some good feedback from customers....thats what really matters. Here is the brake connect video..th-cam.com/video/JsuxAdp-bTI/w-d-xo.html
This would be perfect if it was smoked and only came on when the lights are turned on. Looking forward to buying one when you guys have the final concept down!
Just waiting for the smoked sample now.... keep watching !
Hi, I have a L405 and would be interested if you developed a light bar for this. BTW I have just fitted a 32” LED light bar behind the grill of my L405. It’s stealthy and my god does it throw out some light! Easy to fit as LR have helpfully put everything in place you need to get the job done.
Yes my box where the white black cables go is also upside
Down , tried the blue scot box to connect and tried manually but can’t seem to get it on , can you not just connect all to the plate light ?
You can connect the earth and light wire to the number plate light - but the 12v power feed you need to find a power feed really - it may work on the light wire but you will not get a power down sequence.
Nice bit if kit,would like one for my 494 as soon as they are available, seems to be a delay in fabrication as been waiting for confirmation of stock.
Hi. Absolutely love your channel. I have learned so much from you. I have water running out of the boot lid latch when I open it, after washing the car, or it has rained. I have been told on the RRsport forum that you have made a video of how to fix it.
Please help. I hate getting water down the back of my neck.
Thanks Dave.
I have not seen this issue or made a video on it ... please let me know if you find the cause
Nice! Just wish the illuminated part was as thick as the actual tail lights. Would have looked so nice!
Fair comment - we were a little constrained with the available space but your comment and feedback is appreciated
Hi , They are not available to buy on your website I guess they're out of stock. Could you update when they will be available on your website again to buy, really need one with reverse camera Thanks
They are still about 8 weeks away for the next batch... we have made some improvements to the next batch !
@@L663 will it be available for the EU?
@@L663 Hi any update on these ? it's about 8 weeks already and would love to buy these as been waiting 😊
Fantastic!
Are you planning on these being available for the L538?
That looks superb. Great job. It would match better with the red tail lights.
Yes i agree... but i love my smoked lights !
Simon why can’t you pick up the brake feed from the left rear light cluster?
Because you would still have to go through the spoiler to get into the car?
do you sell it to Portugal
do you have the rear tailgate LED Light Strip - with reverse camera but for the new range rover sport P400e 2020
How long until Will see the l405 version please Simon are we close? 🤞🏻
Hi Simon , when wil this get back in stock? Thanks alot
Looks great but need a version for the evoque 2012 as it would look sick.
It is coming and the wiring will be easier...
where do you buy?
Hi! Any plans to bring one of these out for the 2016 Evoque? Thanks!
We have the tooling made and this will be reduced over the coming few months
Fantastic product 👍
Any plans to make one for the 2020 evoque
Awesome, I wonder if it can be fitted to a evoque.
No not this one... but the Evoque on is well progressed....I should have the first sample in 3-4 weeks..
Bought and fitted - looks superb! Agree that smoked would be cool but if you put red accents like side grill bars, this looks awesome. Defo think smoked rear light set is next on the list. too. 2014 L494.
Top part of the reversing camera is obscured by the spoiler effect. Appears to be enough visibility to see things directly behind still.
Fitting was straightforward-ish. 2 hard bits: (a) feeding the wires through. I drilled an 8mm hole - go with the recommended 10mm. Grommet fitted ok after a bit of wangling. Also could not get through to the space on the video. However, plenty of wire to feed everything to right and circle back (can take a photo of needed). Mini cable ties a god send; (b) tail light connection (green wire): definitely needs care per video. With mine it didn’t work first time but a bit of wangling the wire in the scotch bloc and it made a connection. From there all good now. [will update again once driven at night]
Hi Adrian.... I am keeping an eye on the comments and looking for someone to fit it and check its all good... have you tried it at night yet ?
Glad your happy with it. Agree about the red accents...it matches the red SPORT badge on the rear of mine.
@@L663 updated original post.
@@adrianbarnett2912 OK noted - will check the reverse image on mine. The scotch block connectors are not great - we soldered all connections in the end for reliability.
Dis you see I have posted the brake light connect video... but its a bit tricky !
th-cam.com/video/JsuxAdp-bTI/w-d-xo.html
th-cam.com/video/sN7OuZ_hFNI/w-d-xo.html - the finished product. Video is a bit blurry... sorry.
Rather than having to drill a hole in the tail gate for the wires to go through, you could of sacrificed one of the clip points and repurposed it as the hole for the wires. If that idea would have made the new part not fit as tight, maybe try keeping the clip point but halving its size so it only takes up half the hole, therefore the other half of the hole could be used as the wire pass through. In my short time of tinkering with cars, I’ve noticed a much bigger market for plug and play parts rather than having to modify the original to make the new part fit. I know the wiring is still a splice together task, but that’s a lot more of a reversible process than having to drill a new hole in the tailgate. I might be very wrong in my opinion, to which I say... ignore me and keep up the good work. All the best chaps.
Hi - you are 100% correct and we are evolving this product as we speak !
Many of the best ideas we get are from users and contributors... see my video this week on the "Barclay Hinge" Evoque bonnet lettering.
Do you sell this?
Now you need to make one for the L320, to go with the mod you already sell
Hi guys your videos are amazing and very helpful
Can you please let me know when this is in stock 👍
Great idea... wonderful compliment... 'dont u think Tyler?'
It looks great Simon! I’ve brought a few products from you now, and this will be added to my list! Just need the rear light upgrade first! 💰
We are having problems with the rear lights... some supply issues and some quality issues ( mostly condensation ) - we are pressure testing them in house to try and reduce issues at customer and working with the supplier to improve.
@@L663 So, I’m excited to say that Kate got in touch today and I’m due to receive one of the limited 2nd batch of rear light bars. You mentioned and were very open about the issues with the first batch. I’m assuming you’re happy with the latest ones and I’ll let you know if I experience any issues. All I need now are the 2018 rear lights (your sweeping version, not the OEM ones) Do you have any idea when these are likely to be in stock?
@@paulverney4753 Yes we are releasing the 2nd batch slowly and we have resolved the leak issue and done some testing so we are much happier with the product. Please keep us informed how you get on.... also give Kate an E Mail as i found a pair of lights in the warehouse that she can sell you..if she still have them
@@L663 Thanks Simon, I’ve dropped Kate a message. I’ve fitted the light bar to my MY2015 RRS with the original OEM lights. Would you like a photo to show buyers what they look like in this config?
@@paulverney4753 Hi Paul - glad the light bar is in and working. Yes please send some pictures to Kate and she will send them through to me !
I bought the same tail light but for vogue 2015 honestly I don’t know how to put it up, would u mind helping me?
Will it fit L405 amd it not would you guys make one for it
can i install range rover velar 2019 this led bar or different ?
Another great vid, cheers. Any chance of a video on your 3D printer and your prototyping processes?
Hi Miles - thats probably a good idea... Julian leads this team and he very much works in the shadows..... maybe i need to shine a light on him and his work.
Could you please get /develop more accessories for the Evoque L551
We will keep it in mind !
When are these likely to be back and ready for sale??
Any possibility of doing the rr Sport rear light bar for the new my20 Evoque
ITs possible but it wont be top of our list as the car is still so new and not many people will want to change their new shiny car yet....
Does it come full black (like the original one) rather than with the visible red strip, with integrated red ilghting? That would look better imo when the engine is off, especially with the full black tail lights. Great job and cool channel!
does yes
Very Nice job Simon it looks brilliant
when will you have this back in stock?
Will you do one for the Freelander 2?
Seconded
Andrew not a bad idea.... a large % of our sales are Freelander 2 customers.... I will not forget you guys...
Also a front grille upgrade! Like the prototype shown a while ago
@@andrewa4892 link?
@@andrewa4892 This project has been delayed and it is frustrating but it will be here...
@PowerfulUK can you please put a link to this product in the description above? I want to buy this product please
These are still undergoing some design improvements... will be back on sale in a couple of months.
You got to show these with them wired to the brakes. That would top it off! When are you guys releasing the strip for the evoque?
Hi Jordan - our number 1 Evoque fan !
Here is the video of wiring up the brake lights
th-cam.com/video/JsuxAdp-bTI/w-d-xo.html
We decided the Evoque one will not have the brake light to keep install simple we are just going to use the rear number plate lights as the feed
@@L663 hopefully it will come tinted or smoked 🙂
Still showing these are SOLD OUT??? I haven't seen these in stock in months, are you all going to get in more stock soon? Buyers are ready out here, lets get logistics back on track soon.
Rumours are they are in next week on Thursday
@@L663 Annnnnnnnnnnnnnnd purchased this morning, thanks for the heads up!!! Very much looking forward to video taping the box opening, installation and testing on my 2014 L494. Now just need to find a nice set of 2018 NAS upgraded tail lights that correctly turns off the red light when the indicator is on, wish me luck, haha.
Hi could you please tell if you have the strip light for the evoque
Would you consider fitting these to my RRS if I came to your workshop once lockdown rules allow?
Hi - firstly i am flattered that you would let us work on your car ! but alas we are not set up for customer fitment.. a customer fitting centre is something we are considering for the future !
@@L663 Thanks for your reply - if you do decide to offer a service like this in future please do let me know as I am not sure any of my local garages would have any experience of working with the trim on a RRS. Can you do an easy fit strip like this for the Evoque 2017 too please! (:
@@r77kul8 The Evoque one is coming and will be an easy fit - no need to remove interior trim - it will be plug and play !
The car looks great, but I’m going to ask you of your opinion regarding the reliability of the SDV6 engine that I’ve read about ( crankshaft snap) which must be a concern for all L494 owners! I’m a RRS owner (tdv8) L320 and I would love to buy this later version and upgrade with some of the amazing bits you provide BUT until LR admits a fault and promises to fix all Crankshaft failures I won’t be buying 😕
Have been driving mine for 30. 000miles now . Everything is fine just maybe two times the screen went black and I restarted the engine. Fixed