Finally, I found the video that corrects my mess. I accidentally disassembled the entire blade while trying to remove the silly thing. Thank you for the detailed instruction. Step by step.
Your vids are fantastic. As a new home groomer to a rescued groodle (Australia's name for golden doodle) learning how clipper blades work, go together etc has been fantastic. thank you so much.
Agree with it being tough to see what you are doing with the text on top. Your verbal explanation honestly was enough. THANK YOU. After watching a couple times your video helped me get my Oster back up and running (after I took the blade apart without knowing what I was doing LMBO)
How did you get the blades back together? My husband took his Osters apart. Now there's some small black plastic piece that's also just free floating, unexplainable that needs to be dealt with. The manual and user guide it came with is of NO HELP at all either.
This video helped me out a lot! I have an Oster model no. 10 and have been trying to make my stainless stell Oster 0A (1.2 mm) cutting blade from being uneven with the comb blade. I had taken it apart for cleaning and disinfecting and noticed that half of the cutting blade was going over the comb blade when I put it back together. Little did I know that I didnt do the adjust step you showed on your video. Kudos to you man! Maybe Oster needs better maintenance videos.
For fuc sake ive been trying to get my blade right for months after taking it apart ,I just bought a new one because it wouldn't go back to cutting an it was new ,I tried to 0 gap it ,never again ,but this video just helped me get it right !! Awesome
@107806646537602688010 if the cutter's teeth go over the bottom comb surface area of the teeth it will not cut and move hair around. If the left side of the cutter blade is not exactly same height as the right side and not sticking over the comb blade, it will not cut straight.
My Oster blade came apart when I was trying to oil it. There's a brown thing that I don't know where it goes. I finally figured it out, thankfully I had another blade to compare it to.
It's called a blade guide. It goes on the spring of the clipper blade. In between the cutter blade and the spring will be the guide. It's because the cutter blade moves left or right and you don't want metal grinding on metal so they put plastic in between it
My Oster CryogenX Golden A5 has these weird “U” brackets where the blade holder is. This means I cannot remove the blade holder because of those U brackets. This makes alignment extremely difficult. Does anyone have any videos or advice for this?
Yes, we offer clippers for sale, but not advertised on our website. Please contact us directly for more information cloudsdiamondsharpening.com/contact
my 5 zeros all of a sudden starts puling the hair not cutting at all I take the blade apart and it works for a while and then it goes bad again any one know what's going on?
thank you alot. i'm trying to find this trimmer blades online, but i don't know which website i can buy this kind trimmer blades. ( anyone can help me ? )
Dizzylizzyscreations you can try to not back the screws out so far and it will make it easier to adjust, or you can try tightening one screw down at a time. Here's another video with additional help. th-cam.com/video/tt2IsKzuTyw/w-d-xo.html
So blade tooth should be positioned in gap between comb teeth? Or line up over comb teeth? That is my question. Just got a "New" #7 skip tooth blade and I cannot see blade moving at all. Cut no hair. I adjusted it and moved blade upward a bit and got teeth to line up in gap of comb teeth and can now see it move. But not sure its correct.
Finally, I found the video that corrects my mess. I accidentally disassembled the entire blade while trying to remove the silly thing. Thank you for the detailed instruction. Step by step.
Glad the information helped!
Your vids are fantastic. As a new home groomer to a rescued groodle (Australia's name for golden doodle) learning how clipper blades work, go together etc has been fantastic. thank you so much.
@@Varga_Land thanks for watching!
@@Varga_Land Thank you! I thought it was broke, the black plate just vibrated out😅
Literally the first 30 seconds helped me fix my problem. Improper orientation of the blade, comb, and socket. Thank You!
Awesome im glad i could help you and thank you for watching.
Geez!! U r super awesome! Been trying for weeks!
Thanks for watching
Brilliantly shown. One of the best videos on this subject
Agree with it being tough to see what you are doing with the text on top. Your verbal explanation honestly was enough. THANK YOU. After watching a couple times your video helped me get my Oster back up and running (after I took the blade apart without knowing what I was doing LMBO)
Jane McKay watch the newer video. Thanks for watching
th-cam.com/video/tt2IsKzuTyw/w-d-xo.html
How did you get the blades back together? My husband took his Osters apart. Now there's some small black plastic piece that's also just free floating, unexplainable that needs to be dealt with. The manual and user guide it came with is of NO HELP at all either.
This video helped me out a lot!
I have an Oster model no. 10 and have been trying to make my stainless stell Oster 0A (1.2 mm) cutting blade from being uneven with the comb blade.
I had taken it apart for cleaning and disinfecting and noticed that half of the cutting blade was going over the comb blade when I put it back together.
Little did I know that I didnt do the adjust step you showed on your video. Kudos to you man!
Maybe Oster needs better maintenance videos.
@@suburbhermit8792 thanks for watching!
You are an excellent teacher. Ty!
Thanks for watching!
Excellent workflow, broham! Doing it twice rocked. Thank you!
Thanks for watching.
Thanks your video helped me the most you make it easy.
@@nicoleasche623 thanks for watching!
No problem thanks for making the video
Hey, thanks! I got the blade apart and then couldn't figure out how to get it back together. Your video did the trick.
np and thank you for watching.
After I have cleaned the trimmer and aligned it, how do I put it back on the andis trimmer?
It depends on the model? Do you know which model you have?
Wow, your great videos helped me put new life into my wahl arcos! Any ideas on replacing the batteries in that short-life battery pack? Thanks!
Hello. Np. 😁. Look on Amazon for Wahl Arco battery packs or Google search a Wahl distributor . Thank you for watching
For fuc sake ive been trying to get my blade right for months after taking it apart ,I just bought a new one because it wouldn't go back to cutting an it was new ,I tried to 0 gap it ,never again ,but this video just helped me get it right !! Awesome
Np and awesome, I'm glad I could help and thank you for watching!
I still can't figure out how I'm supposed to align the blade to the comb. Is it the blade to the edge of the comb. please explain. Thanks
+blueagle1100 just make sure the cutter blade doesn't protrude over the comb and then you'll be ok.
What do you mean "over" the comb? Do teeth line up exactly parallel or staggered in between gaps?
@107806646537602688010 if the cutter's teeth go over the bottom comb surface area of the teeth it will not cut and move hair around. If the left side of the cutter blade is not exactly same height as the right side and not sticking over the comb blade, it will not cut straight.
Cloud's Diamond Sharpening Thanks
Best freggin video on assembling blades, THANK YOU.
henry knorowski NP. I'm glad you enjoyed it. thank for watching.
My Oster blade came apart when I was trying to oil it. There's a brown thing that I don't know where it goes. I finally figured it out, thankfully I had another blade to compare it to.
It's called a blade guide. It goes on the spring of the clipper blade. In between the cutter blade and the spring will be the guide. It's because the cutter blade moves left or right and you don't want metal grinding on metal so they put plastic in between it
Mine are ANDIS MODEL ZDJ035100 US.
Show me how to my blades my Andis clippers
@@lindagee1420 th-cam.com/video/BUelsD9pbIo/w-d-xo.html&lc=UgynScykBByaEJkj0dd4AaABAg
Thank you very informative and quick.
David Cada np and thank you for watching.
Is it possible to take out the motor assembly of Andis T Outliner with rivets and change it to a motor assembly with screws.
Anything can be done, but it's probably not worth it.
My Oster CryogenX Golden A5 has these weird “U” brackets where the blade holder is. This means I cannot remove the blade holder because of those U brackets. This makes alignment extremely difficult. Does anyone have any videos or advice for this?
I could probably help you. Can you send me pics to 682-559-7558? I'll respond as soon as I can.
Which part of the blade do you sharpen? The comb or the cutter?
How do youput spring back in the hair clippers
How put blades on performer hair cutting kit
+Jimmy Thomas I dont know what that is.
+Jimmy Thomas Watch the whole video. I show a demo in this video.
On your video you said that you sell clippers on your site but I don't see any clippers for sell on your site.
Yes, we offer clippers for sale, but not advertised on our website. Please contact us directly for more information cloudsdiamondsharpening.com/contact
oh. ok
What’s the little plastic piece called?
a blade guide
my 5 zeros all of a sudden starts puling the hair not cutting at all I take the blade apart and it works for a while and then it goes bad again any one know what's going on?
GOOD. JOB. BOSD
Thanks and thanks for watching
How to get 3 mm comb, my comb lost
Good video but i needed to see where the little piece goes :) and you all ready have it in when you screw the pieces together
Thank you. The blade guide? what little piece?
thank you alot.
i'm trying to find this trimmer blades online, but i don't know which website i can buy this kind trimmer blades.
( anyone can help me ? )
SAO CHỦ JUPITER Thank you for watching.
do you have more educational videos like this. some of the filming was off . I am trying to learn to sharpen my own grooming blades.
tammy cambridge I do not train. I'm sorry. good luck.
THANK YOU! i couldn't figure out how to get the dang blades back on my expensive pet clippers! 🤗😥😅
R. Michelle Guelfi np. I'm happy my video could help you. Thank you for watching.
Does CLR damage blades??
Yes. Use clipper blade oil or h_42 oil.
At 1 minute 08 seconds typo. *Then take the spring and "Socket" not sock
+Cloud's Diamond Sharpening IT'S TOO LATE, I'M USING A SOCK!!
+John Ballinger good luck.
can you re-do this video without text covering the image? I can't see what you're doing sometimes, because there's text
I cant get my cutter blade to align properly, when I tighten the screws it pulls one side down.... Oster golden a5
Dizzylizzyscreations you can try to not back the screws out so far and it will make it easier to adjust, or you can try tightening one screw down at a time. Here's another video with additional help. th-cam.com/video/tt2IsKzuTyw/w-d-xo.html
Thanks!
Thank you so much for this video. I groom my diabetic dog at home since it can be dangerous for him to become stressed.
+lisamariek2009 You are welcome. I sharpen blades also. Thanks for watching and have a nice day.
my 00000 blade has starting snagging clients hair. what can i do
It probably needs to be sharpened or there is something wrong with the clipper, but more than likely it is a dull blade.
thank you..👍👍🙄🤗
Thank you so much!
+puppetken You are welcome. Thank you for watching.
I think I wrecked my clippers lol by taking the blade off.
+puppetken That don't make sense.They are meant to come off.
I was looking to see how the teeth are supposed to line up. Couldn't see and you didn't say
The cutter blade needs to not hang over the comb teeth. If it does, it will only move hair and not cut it.
at 2:00 minutes I show you in video.
So blade tooth should be positioned in gap between comb teeth? Or line up over comb teeth? That is my question. Just got a "New" #7 skip tooth blade and I cannot see blade moving at all. Cut no hair. I adjusted it and moved blade upward a bit and got teeth to line up in gap of comb teeth and can now see it move. But not sure its correct.
My clippers aren't like that.
HEY. Friend. OK.
Hey buddy!!