Amazing work. Kills me being stuck in Indiana where custom work is like finding a needle in a hay stack. Keep up the great work . Love the videos and can’t wait to see more of the Jeep Comanche!!❤
7:30 Depending on which leaves you got, with my Quadcab they were the 1800lb HD 4x4 leaves from the factory, being most of the QCs were 4x4s and with mine being 2WD it really had the stinkbug stance once the front coils started sagging bad. Being a base not sure what it was factory 1250s? When I dropped it I went for the Belltech drop leaves, think their about 1500lb load capacity just re-arched... plus i didn't have to mess with shims :)
Man I've been watching you build these Dakotas for about a month now and man I really like your work is clean if you read this message could you please send me a complete list of everything I would have to do to put the scat pack SRT8 motor in tranny in the Dodge Dakota club cab RT
I like the center console. Just curious if you recovered stock seats with something like Katzkin seat covers? We have them in our 2012 Ram, the fit excellent and look good even after several years. The owner is going to be very happy, you create such cool projects.
Room permitting: Could the center seat, be used in conjunction, w/ the front portion of the center console? Best of both worlds, if stock seating was desired
Why is the rear-end on top of the leaf springs??? All 3 of my Dakota's mount to the bottom of leaf springs. Only my 4 Durango's are bolted on top of the springs???
Um nah fam keep the bench seat. More people more of a connection. What if someones daughter wanted to tag along. With two seats sally cant tag. With a bench seat sally can tag plus mom
![[UNCUT] "บอสณวัฒน์" แฉ! แหล่งซุกเงินแก๊งบอส ขยันผิดที่ไม่กี่ปีก็เข้าคุก l คนดังนั่งเคลียร์ l17ต.ค.67](http://i.ytimg.com/vi/BL56qIfXYZM/mqdefault.jpg)
Ur hella of an inspiration some people look up to movie stars I look up to this guy man does he know how to work a car
That’s how you hook up a base model truck! I think the 392 is better street engine then the hellcat
you’re out your fuckin mind
Nah the hellcat engine wayyyyy stronger than
Amazing work. Kills me being stuck in Indiana where custom work is like finding a needle in a hay stack. Keep up the great work . Love the videos and can’t wait to see more of the Jeep Comanche!!❤
392 Dakota is probably my favorite build but HELLKOTA is still amazing👍🏾🥤🍗🤳once the driveline Vibe is Ironed out we can see its full Glory✌🏼😎☯️
I'd keep the hump seat for street use. You never know when U might need it✌🏼😁🤳
Console Stays !! Kinda looks factory ! Great job as always ! 🥇
this man does some really clean ass builds!!! keeping doing what you do. love these videos.
Me with the flairs and stock wheels hiding an 8.50 tire "it's gottuh 318 in it" 😂
Plum crazy purple would look badass
Keep the console. Add carpeting. Looking great!!
Hi john absolutely love these dakota builds this scat pack one definitely should have scat pack interior ( ps my ram throttle body still kicking ass)
Great work John!
I wait here✌🏼🤠🌵
What are you doing to control the 8 speed transmission with the Holley Terminator X?
Console looks good keep it. Like always great work brother!!
Leave the console in..... it's a 2 seat hot rod. And 3 is a crowd plus it looks like it belongs there.👍👌✌️
Great job!! You really get a lot of things done!
7:30 Depending on which leaves you got, with my Quadcab they were the 1800lb HD 4x4 leaves from the factory, being most of the QCs were 4x4s and with mine being 2WD it really had the stinkbug stance once the front coils started sagging bad. Being a base not sure what it was factory 1250s? When I dropped it I went for the Belltech drop leaves, think their about 1500lb load capacity just re-arched... plus i didn't have to mess with shims :)
A genius at work.Love your videos.Beautiful work and attention to detail.
LIKE 3👍🏾😎🤳
Center concel is dope af
what are you using the run the transmission?
Seems like wells have to cash him out for that info huh
Looks great. I would definitely keep the console, carpet the floor and swap out the seats.
Leave the base model interior! Goes with the sleeper vibe! Can you use a column shifter from a Charger pursuit package?
Challenger seats and center console.💯👍
From the last video.. what is needed to get the fuel sender to work without the factory PCM? Trying to run a sniper 2 with the same drop in pump.
I used the Challenger console and put a Hurst shift handle with a new black boot...! Have Corbeau seats on order...!
Man I've been watching you build these Dakotas for about a month now and man I really like your work is clean if you read this message could you please send me a complete list of everything I would have to do to put the scat pack SRT8 motor in tranny in the Dodge Dakota club cab RT
This is so awesome
instant like click even though its 4 hours away 💪
should put a demon in a dakota and call it demonkota lol
Hey from Peterborough. Love the console. What transmission control module are you using. Keeper up, brah!
I want to know the answer too
Just a FYI, 08 dakota DBW pedal and bracket bolt right in.
I like the center console. Just curious if you recovered stock seats with something like Katzkin seat covers? We have them in our 2012 Ram, the fit excellent and look good even after several years. The owner is going to be very happy, you create such cool projects.
That's what he did on the white Dodge
Looking good bud
You wouldnt happen to have the link to where you got the radiator set up from do you?
enjoyed the video.
thumbs up !
Do you have the radiator information. I need to put one in my ‘99 project truck.
You should paint it plum crazy purple. I have never seen one that color
Keep the console. Looks bad ass, plus who in the heck would want to sit there?? LOL
Great video projects moving a long
Toss the stock jump seat and keep the Challenger console.
curious where you bought the radiator? I am doing a swap and would love to buy one like that.
I have a 2001 5.9 rt that I’m looking to swap with the 6.4. Any suggestions would be great
That's going to be way badder than a Dakota RT
Keep the 8sp cc console and change the seats too.
I wonder if a s10 stepside bed would fit on one of those
So dope
Man I love what your doing especially with the 1500, if I could i would take my 4.7 outta my 1500 and throw a hemi in it.
Room permitting: Could the center seat, be used in conjunction, w/ the front portion of the center console? Best of both worlds, if stock seating was desired
Keep it 💯
Keep the center console and also make it a push start instead of turn key
yay
Wonder wat the cost to have u build a truck for me
Why is the rear-end on top of the leaf springs???
All 3 of my Dakota's mount to the bottom of leaf springs.
Only my 4 Durango's are bolted on top of the springs???
2 & 4 wheel drives are different...
yep, thats why some trucks have the axle flip kit, where they go from spring over axle to spring under axle usually nets a 3" drop@@Evan-qx9og
Keep it
The 6.4 put a hellcat blower on it and on the 5.7 it is pretty easy to it is plug and play
I had a 2000 with the 4.7 slammed on the ground. My dream build is this truck with a helicat swap
Where did you buy the radiator setup? Looking to get one for a hemi swap on a dak
I’m actually selling that radiator with fan and shroud send me an email Boostedmotorsports88@gmail.com
Definitely keep the center console. You wouldn’t be able to fit a normal sized person in the center jump seat anyway 😂
Keep it and put the dash in it like the hellkota
What engine was in it?
❤
Keep the center console it looks like is factory
🤘🏼🔧⚙️✌🏼🔥💯
5.7 swap a starion please with a manual transmission
Keep the console
Tell the owner to put the nitrous plates in there before you put the intake manifold back on.
100 shot to start.
Um nah fam keep the bench seat. More people more of a connection. What if someones daughter wanted to tag along. With two seats sally cant tag. With a bench seat sally can tag plus mom
The 3rd seat in those are USELESS for anyone over about 50 pounds
Nah keep that stupid sag look all the kids are doing these days with their trucks. No seriously glad you fixed that rear suspension