Super Antenna for DVB T2 digital TV, decimeter waves, wave channel DIY
ฝัง
- เผยแพร่เมื่อ 23 ส.ค. 2024
- Simple homemade antenna for digital television. The cost of production is less than 3 dollars! Exact antenna dimensions. Antenna for DVB-T1 and DVB-T2. Antenna for terrestrial television. Wave channel antenna. Beginners.
Contact me: migdiy2020@gmail.com
My Instagram:
/ madeingarage1
I like your method of making this antenna Sir. Hope you make more antennas for way longer distances.
Have yourself a Happy New Year too. Peace vf
Hi, thanks for the video. What are the measurement? How long is this aluminium bar?
Nice one,
Can we see also how build up receiver?
Ive looked comments and there non answers on questions, sadly
This yagi antenna is based on a closed dipole, which have cca 300 Ohm Impedance. You need a matching transformer that will push the impedance down to 75 Ohm (as wast majority of the commercial SOHO DVB-T receivers are built with 75 Ohm impedance at the receiver input )
Hi there!
Do you know how to build diy the receiver?
Would be great, thanks
Me gusta .espectacular .pero no sé las medidas exactas .soy Alejandro d Cuba .gracias
A powiedz mi gdzie znajdę schemat w jakich odstępach mam dawać rurki i jakie długie chce sobie zrobić taką pod dana częstotliwość :-) z góry dzięki
Istnieje wiele odmian. Oto kilka
drive.google.com/file/d/1CXBqoI0pUjWhRp5ImV4QLh7YfbfrRtoz/view?usp=drivesdk
So the director connect with the dipole ?
I am disappointed because though it is a well-crafted antenna, there was no clear demonstration of how many stations were received, or if it was for internet WIFI, nothing was shown, so how do we grade this antenna or why should I copy what you have built?
On what parameters are the measurements based used in constructing this antenna. It likes a Yagi antenna is it for internet or for TV?
its nice yagi antenna, what is the dimension of a driven element, space between each director element, and lenght of a director elements. you give a 131mm length of director is that total lenght or one side only, thank you for response and sharing this yagi antenna.
Thank you.
Someone (few actually) posted how did you connect the receiver. Please post. thx
through an electronic matching board, or a signal amplifier board
Very Well done !
Show parabéns 👏
0:20 how dimension about dipole?
Nice work!
Thanks!
You need insulators for those elements, you’re losing db gains
I was so thinking the same thing...That antenna will simply divert the signal energy to ground if no insulators are used...Or as you point out a loss in DB gains...The whole thing becomes the receiving element and making it no where near resonate...
Any balun for this driven.. sir...?
Thanks alot
Those elements don't look right being inserted through the beam. They should be insulated. I can't see it working very well that way.
Were does the cable connect?
From the antenna to the TV
я из банок жестяных сделал 4 год уже стит
В России эта антенна будет работать?
Good work big bro subscriber now
Mohon kasi ukuran yg jelas, agar saya bisa membuatnya 🙏👍
They are in video
Saya bingung, antara ukuran elemen dan spasinya,
Hiiii
Sir please make antenna for FM 88-108MHZ
Mostra o preso
All Grounding.😁😁😁😁
Лайк 👍👍👍
Senza balun butti via metà segnale.
Can you talk?
Most aparentlly, he cannot talk and he cannot reply to questions wither. He also has no clue about antenna design theory this one has very little gain the way the directors are connected to the main AND eventually to the dipole.