Suggestion: display the angle in percent as well as in degrees. A beeper would be nice at both 0° and 90° or better, above or below a selectable threshold. And the digits could be as big as possible, and always upright...
Maybe use a solid base on which the entire pcb sits on. Using a double sided tape does not make sure that the entire tool is sturdy even after calibrating in the long run.
Crazy idea so hear me out. Since you know the length of the levels body. Why not convert and calculate Degrees to millimeters instead? You can show on display arrows either left or right side is up or down. Show how many millimeters the difference is with 1 or 2 decimal points. To add percision and not fluctuate number on screen only display value of 5 reading average on screen. Do measurements in every 100ms so board can keep up. Oh, and add capacitor to Ultrasonic to smooth out the supply and you get more accurate and smoother reading.
Hello sir, You have done so many great projects. Thanks for sharing your experience with us. Can you please Make Lazy Mini Grid ( By parallyze ) with a proper code flashing video. I found this project on Instructables. Please.
Nothing done here was all that complicated and is definitely within the capabilities of a lot of electronics hobbyists. You don’t need to have gone to college to make this.
nice project but only educational. It has no real practical applications because 1 degree of inclination is really a lot and used like this the MPU6050 is not precise. economically it is unsustainable compared to a commercial level
This actually seems like a very doable beginner project. Even the pcb. I will give this a try. Thank you for the video
Watching you from 2019 and loved your videos, now working on own technology ❤
Thanks ❤️
Fantastic work, dude! Amazing project indeed! 😃
Stay safe there with your family! 🖖😊
Thanks! You too!
Suggestion: display the angle in percent as well as in degrees. A beeper would be nice at both 0° and 90° or better, above or below a selectable threshold.
And the digits could be as big as possible, and always upright...
Nice, will make an improved version of this and include these as well.
Watching this channel from 2020 really good ideas
Glad you like them!
Maybe use a solid base on which the entire pcb sits on. Using a double sided tape does not make sure that the entire tool is sturdy even after calibrating in the long run.
Great project
Thanks ❤️
is calibrating permanent? or you need to do it every time you power the tool on?
It’s probably temperature dependent. Check the datasheet for accuracy figures.
My only one question to you is that where do you order all of these products? BTW Cool Project 👍
Thanks! i got everything from DF Robot
@@TheWrench for free? 😁
That was a really cool project. 😄
Thank you! ❤️
The print is pretty smooth, Which printer you use??
Hello, it's bamboo lab x1
Nice man! Keep it up🔥🔥
Thanks 🔥
Crazy idea so hear me out. Since you know the length of the levels body. Why not convert and calculate Degrees to millimeters instead? You can show on display arrows either left or right side is up or down. Show how many millimeters the difference is with 1 or 2 decimal points. To add percision and not fluctuate number on screen only display value of 5 reading average on screen. Do measurements in every 100ms so board can keep up. Oh, and add capacitor to Ultrasonic to smooth out the supply and you get more accurate and smoother reading.
Great project ! can you make subwoofer in combination with your bookshelf speakers
Soon
Nice Work!
Thanks!
Great project
This project is cool for carpenters ❤
Could be possible. but it needs to be more accurate. Thanks ❤️
great video bro
Glad you enjoyed
@@TheWrench yehh
This could be very useful tool for me, for installing industrial machines on a level ground
Use a level?
Thats amazing
Thankyou ❤️
I love your content always 🔥❤ and doo your pc setup plss pls ✨️
Sure!
Nice Video bro 👌🏼..
Thanks 🔥
Waiting for the amazing part still.
Now do a level like this with a laser distance measurement. That's a tool that I'd use a lot.
That would be cool
Cool project.
Thanks ❤️
from were do you pickup idea or the projects for your video
Whats that black box at 6:12? Which chip is inside?
Thanks!!!
which software did you used for creating the pcb?
Easyeda, its a online site
Good one 👍
Thanks ✌️
Can you make a gaming wheel with that geoscope
i think i might try that. thanks for the idea.
Hello sir,
You have done so many great projects. Thanks for sharing your experience with us.
Can you please Make Lazy Mini Grid ( By parallyze ) with a proper code flashing video. I found this project on Instructables.
Please.
Thankyou ❤️ i will try to make it near future.
Waiting for your video ❤
Which course did you studied in college bro ?
Obviously gynecologily
Nothing done here was all that complicated and is definitely within the capabilities of a lot of electronics hobbyists. You don’t need to have gone to college to make this.
@@conorstewart2214yeah sure
Go study EE and you won't have to make this project using breakout boards and a shitty and huge PCB that does nothing more than the breadboard did.
The „learn how to read begginer arduino stuff on the web” course.
Does it not occur to you to give us a hint what this "Amazing tool" will be? We have to watch the video to find out?
Execellent......
Thanks
Did you pay any import tax for this PCB purchase? (bcoz it came from China)
You can make easily in India also..
@@arbjful yeah, I just wanted to know how much do we need to pay as import tax if buy something from outside India
music link...?
nice work bro can u give me the lint for the code
nice project but only educational. It has no real practical applications because 1 degree of inclination is really a lot and used like this the MPU6050 is not precise. economically it is unsustainable compared to a commercial level
What happen to your bambu lab x1c
Nothing, it’s working great but why do you ask?
Because you removed the part where the name is written x1 carbon beside screen
That white colour panel
Can you a personal jarvis ai robot
i don’t think so 🥲 but i will try soon
I need to know your bgm
bgm?
Background music@@TheWrench
it's made by Vxlcn Beats. check description
@@TheWrench did you mean that if I follow your Facebook, then I can get your bgm?
❤❤❤❤
❤️
👍👍👍👍
I don't know what to say.... Why would i need such thing to be honest.
insteresting stuff
Thankyou ❤