Just built this frame last weekend. Also on 6s and with 3.6" gemfan props. Decided to go with rcinpower 1507 motors because as far as testing goes i do believe taller motors are more responsive but overheat easier. So far no issues with overheating and it rips. Only use 550mah 86g lipos so its power to weight ratio is quite nice.
I turned my F3 split into an F35 Split and built a second F35 split also! I freaking love them! The original is sporting T-Motor p1604s and a naked o3au. The newer one has the P1804 T-Motors and a Polar Vista for night flying. I usually run the GNB 930 mah 6s packs but sometimes I even run my standard 1300mah packs. With the Gemfan 3.6" props, it's no issue at all! These things are so much fun!
Also, 2204 motors are great but you might get a similar stator volume with a 1507 and there are some really good 1507 motors that are unibell. if i were you i would consider the foxeer datura which im pretty sure is a rcinpower rebrand. you could also go for a 2203.5 like the diatone mambas which are unibell, but lower kv. you could also go for the hglrc aeolus 2006 in 2800kv, but i dont know if you would like to have a t mount shaft. you could also go for the rcinpower 2104 in 3000kv, but you will have slighly less stator volume, and once again it has a non m5 style shaft.
I built a similar build with the aos 3.5 frame. You might find the motors I used to be right up your alley. I used Rcinpower GTS V3 2105 Plus 1850KV/2950KV/3600KV. I'm using the 3600kv with motor output at 90% on 6s and it's a monster. Unibell design as well.
I freakin’ love my F35! I’m a little sad that by the back left stand off I’ve already broke the frame but it still flies well. I’m just waiting on an antenna for my WS vtx and then it’ll be back up and shredding. I’ve been flying it with EMax Evo 2204 3000kv motors on 4s but I might have to try 6s again on it.
Great video. Bro. I'm building one now and I'm also looking for a good motor. Also, cool you, but the DJI Action on it is what I was planning on doing. It's also cool to see it fits great on it. I'm getting an action just for this build, lol.
i was going to suggest the motors im planning to run, the tmotor 2203.5 but i forgot they were only 3.5 stators for a second haha i ran the higher kv ones on 4s and worked great for my heavier 3.5'' skylite but i have a pair of the lower kv ones to run 6s on my future 3.5". Im pretty sure you run those on your djinn so maybe its not what youre looking for! if you find a more durable option we'd love to hear about it
Im thinking of building one of these. You said in the video that the motors you used were not that durable, so i was thinking of using the RCinpower 2105 2950KV motors. They are tecnically not made for 6s but I am thinking of trying it out since they are a mono bell design, and are RCinpower. So they will probably last longer. I was also thinking of the iFlight XING 2205 2300KV, but they have a lower KV, so im not sure. Have you swapped the motors yet or are you still on those Axisflying ones? If so, i would be interrested in which ones you decided on.
Im looking for a 3.5'' build that feels like a 5'', I also need it to be durable in order to fly bandos and Im using the o3 aire unit as my video so it would be great to avoid props on it. Would this build be something you would recommend for what I'm looking for? or do you have anyother suggestions or changes to make? Amazing flying as always!
I got a Volador 3.5 inch with an 03 air unit that I just built. 2203.5 Tmotors. 3550 kv on 850 mah new rlines. 4s. I run 6s on my 5 inch ao i was trying a lighter battery type for fun.
It still needs a tune but its crazy fast and handles super great. Just some throbbles and shakes on turns. Trying to learn to tune on my own with no presets to get experience finally in it.
That thing looks like it would be really heavy for that size prop but the flight footage looks like a 5" so it's obviously working. I usually try to go as lite as possible with micros but maybe I need to try a heavier more powerful build.
Bulding mine f35 with RCINPower GTS V2 1506 and hqprop 3522, 3528 and have 3630 on the way one piece bell. 3000kv seems bit juicy but ill see how it goes. got them 7 of em for 50 bucks so wanted to try em out
@@MurdersFPVRight on, it's what they run on the volador 3.5. Almost went with the 1604 T Motor's from your SF3 build. The 18's are pretty big, not sure how much protection they'll get from the arms.
Hey man,im making a quad with the same frame and 2910kv motors,when using a 6s battery should i limit the motor output?My motors are compatible with 4-6s batteries but i dont wanna damage them
So far I was exclusively flying 5" quads. However, your video inspired me to build a ""sub-5"-freestyle". Assuming 3.5" frame, 6S battery, w/o GoPro and 3.5" props, which motors would be the best choice? I cannot decide between 1507 and 1804 (5 mm shaft). Any suggestions?
Just ordered myself the f35 frame yesterday 😅 gonna slowly build it up over the next few months since I’m not in the best economical position to spend money so one part a month it is😭 but just wanna say thank you for posting videos on all the Quadmula frames I was so indecisive on which one I wanted other than knowing I wanted from them and on top of that their customer support is full of top tier people who actually care to help you solve any issues and will try their best. Was struggling for 3 days and they helped me thru it and even uploaded my shipping cuz of some issues. Great team and will have a forever customer from me too. Was wondering if either you murders or just anyone here watching like me with this frame if yall would recommend going the 4s route with the 1604 t motor motors or 6s with the 1605s or even the same 1604s?
I highly recommend sticking with what you're comfortable with. 1604 on 4s will definitely work. There's nothing wrong with that setup. I tell people all the time that Quadmula has been the most ethical company I've worked with in the hobby. They have never escalated a situation, especially publicly. They will move mountains to offer support however they can. They are extremely generous and not just money hungry vilians trying to make a buck. They have never asked me to sensor anything about their frames, and they strongly encourage feedback from me and the community. They listen carefully to criticism, and they have always respectfully replied in detail and with a lot of thought in their words. It's why I'm honored to represent them as a sponsored pilot. They are pilots too who just want to make the best product they can and grow the community they love.
@@MurdersFPV wellll I’ve only started 2 months ago with tiny whoops and damn it’s been a journey this far but I’m power hungry for more but still will be using the whoops ofc. But hmm will probably do 4s so I can get the hang of it then later on maybe build the f5 6s😅 But oh yeah I could definitely say that it’s 100% true what you said first hand. Those guys are phenomenal and you aswell for keeping it truthful with us! Appreciate the feedback and response
@@TrippyFPV.I fly mine on 4s, Not using an external cam, just the O3 for recording, main goal, as light as possible and under 250g With 4s and 1404 3800kV you will have a power house, which will serve you well and without additional cam it will be under 250g using 650mAh Tattu R-Line, naked Air unit, ViFly Mini for less time searching... 4s Lipo are a bit cheaper than going 6s
Spring definitely coming 🙌🏼 the cold is killin me. I have the xnova 2203.5 on mine. Not 2204’s but close. I couldn’t imagine to much of a difference. Beautiful ripage my friend🙏🏼
The power loop roll? I've always done that randomly, usually when I'm trying to cut a powerloop as close to an object as possible, and I'm worried I'll either hit it or not clear it. Everything I do is planned...in real time. 😅
I've always wanted an F3 frame but I can't get Quadmula stuff from where I am. So I went with FlyfishRC Volador VX3.5 3.5" instead. I'm also using Gemfan 3630 with GEPRC 2105.5 and as you say it gives ample powah!!! Great build man!
![ประสบการณ์ จ้าง Developer ที่ผมจะไม่มีวันลืม [ภาค2]](http://i.ytimg.com/vi/pZbsSDRrmXA/mqdefault.jpg)
![ILLSLICK X YOUNGOHM - We're The same [Official Video]](http://i.ytimg.com/vi/yUJNkobYR0E/mqdefault.jpg)
ive been watching that little flip at 1:13 on repeat for like 15 minutes now.....
Just built this frame last weekend. Also on 6s and with 3.6" gemfan props. Decided to go with rcinpower 1507 motors because as far as testing goes i do believe taller motors are more responsive but overheat easier. So far no issues with overheating and it rips. Only use 550mah 86g lipos so its power to weight ratio is quite nice.
That thing rips! I like it. Let us know if you end up upgrading the motors and thanks for the honest review
Such a sick build. Appreciate the settings. Still working out the kinks in mine. Sending it this weekend. Fingers crossed third time is a charm!
Nice build, I'm impatiently waiting for this thing come back in stock!
They were available a couple of days ago, luckily I got one as they sold out pretty quickly!
@@ackers33 I got mine too! Started building it a few days ago!
@@DroneDaddyFPV nice! What motors you gone for? I'm thinking rcinpower 1507 motors for 6s.
@@ackers33 should be a ripper! I went with flyfish flash 1804 2450kv also going for 6s
Super clean flying dude ❤
Sick Nichalos.,awesome spot and your pilot skills my dude
I turned my F3 split into an F35 Split and built a second F35 split also! I freaking love them! The original is sporting T-Motor p1604s and a naked o3au. The newer one has the P1804 T-Motors and a Polar Vista for night flying. I usually run the GNB 930 mah 6s packs but sometimes I even run my standard 1300mah packs. With the Gemfan 3.6" props, it's no issue at all! These things are so much fun!
I start next week with f3 on 4s with 1604 t motor and light o3 I was hoping its enaugh power.. You would recommend in any case 6s ?
Also, 2204 motors are great but you might get a similar stator volume with a 1507 and there are some really good 1507 motors that are unibell. if i were you i would consider the foxeer datura which im pretty sure is a rcinpower rebrand. you could also go for a 2203.5 like the diatone mambas which are unibell, but lower kv. you could also go for the hglrc aeolus 2006 in 2800kv, but i dont know if you would like to have a t mount shaft. you could also go for the rcinpower 2104 in 3000kv, but you will have slighly less stator volume, and once again it has a non m5 style shaft.
I thought about 1507 motors. I'll have to check out the Foxeer ones. Thank you!
@@MurdersFPVno problem man❤❤❤
Rcinpower 1507 plus are a little bit bigger, 1507.5. Good to consider@@MurdersFPV
I am wrong. Usually the "plus" means 0.5 at rcinpower but not here...
I built a similar build with the aos 3.5 frame. You might find the motors I used to be right up your alley. I used Rcinpower GTS V3 2105 Plus 1850KV/2950KV/3600KV. I'm using the 3600kv with motor output at 90% on 6s and it's a monster. Unibell design as well.
That sounds sick.
I’m filming my Sub250g build of this at the moment I can’t wait to see how different it is to the SF3
Tmotor 2203.5 2850kv baby! ALL DAY
That's what I use also and I've only broken one
Are you running 6S on these?
@@chriskarcher9561 yup 6s forever
@@chriskarcher9561 yes sir!
been waiting for this! planning on getting this frame to replace the frame on my baby ape II and it seems fenominal. quadmula never dissapoints💪💪💪💪
I freakin’ love my F35! I’m a little sad that by the back left stand off I’ve already broke the frame but it still flies well. I’m just waiting on an antenna for my WS vtx and then it’ll be back up and shredding. I’ve been flying it with EMax Evo 2204 3000kv motors on 4s but I might have to try 6s again on it.
The diatone roma F35 have 2203.5 I love to run on a 3.5 inch build very good motors
Great video. Bro. I'm building one now and I'm also looking for a good motor. Also, cool you, but the DJI Action on it is what I was planning on doing. It's also cool to see it fits great on it. I'm getting an action just for this build, lol.
i was going to suggest the motors im planning to run, the tmotor 2203.5 but i forgot they were only 3.5 stators for a second haha i ran the higher kv ones on 4s and worked great for my heavier 3.5'' skylite but i have a pair of the lower kv ones to run 6s on my future 3.5". Im pretty sure you run those on your djinn so maybe its not what youre looking for! if you find a more durable option we'd love to hear about it
Looks sick man I'm in the process of a quadmula build now and I can't wait to share 🫡
Im thinking of building one of these. You said in the video that the motors you used were not that durable, so i was thinking of using the RCinpower 2105 2950KV motors.
They are tecnically not made for 6s but I am thinking of trying it out since they are a mono bell design, and are RCinpower. So they will probably last longer.
I was also thinking of the iFlight XING 2205 2300KV, but they have a lower KV, so im not sure.
Have you swapped the motors yet or are you still on those Axisflying ones? If so, i would be interrested in which ones you decided on.
Im looking for a 3.5'' build that feels like a 5'', I also need it to be durable in order to fly bandos and Im using the o3 aire unit as my video so it would be great to avoid props on it. Would this build be something you would recommend for what I'm looking for? or do you have anyother suggestions or changes to make? Amazing flying as always!
I got a Volador 3.5 inch with an 03 air unit that I just built. 2203.5 Tmotors. 3550 kv on 850 mah new rlines. 4s. I run 6s on my 5 inch ao i was trying a lighter battery type for fun.
It still needs a tune but its crazy fast and handles super great. Just some throbbles and shakes on turns. Trying to learn to tune on my own with no presets to get experience finally in it.
That thing looks like it would be really heavy for that size prop but the flight footage looks like a 5" so it's obviously working. I usually try to go as lite as possible with micros but maybe I need to try a heavier more powerful build.
On every 3.5" prop I tried, it felt heavy. The 3.6" props are definitely the secret sauce.
@@MurdersFPV I'll give them a try - thanks!
that flow
Bulding mine f35 with RCINPower GTS V2 1506 and hqprop 3522, 3528 and have 3630 on the way one piece bell. 3000kv seems bit juicy but ill see how it goes. got them 7 of em for 50 bucks so wanted to try em out
Building this one right now, went with flyfishrc flash 1804 2450kv on 6s. Hope it's a good choice.
That's definitely more in line with what it was intended for. 2204.5 motors is pretty big for this build and 1804 would be perfect.
@@MurdersFPVRight on, it's what they run on the volador 3.5. Almost went with the 1604 T Motor's from your SF3 build. The 18's are pretty big, not sure how much protection they'll get from the arms.
please a build video
This video is so great that makes me really wanna get one… though I won’t be able to because Quadmula decided not to sell in their own country…
rcinpower 1804 could work really well in this build. The 6s 2450kv version. I have been waiting for this frame, great stuff!
1804 is a great choice for this build. I don't think it could carry an Action 2 nearly as well, but I'd likely just rely on the O3 for footage.
@@MurdersFPVfor sure, for anyone who plans on flying analog or using o3 footage 1804s are great. i run an insta360 go3 and 1804s work great for sure.
Could you carry a full size GoPro on this build? Motors seem big enough
@davidblanco7035 you could. I carried a Mini 11, which isn't far off from a full-size GoPro.
@@MurdersFPV thanks!
That is sick build! Very good video🔥🔥 What you think can i use the T-motor p1604 and still freestyle with DJI Action 2 or should i use bigger motors?
I wouldn't use the Action 2 unless you're doing a similar build to this one. P1604 is too small, in my opinion.
@@MurdersFPVokay good to know. Do you have any recommendations for motors?
Maybe the iflight Xing2 1806 2500kv(6s), with 3630-3 props. What do you guys thing. Should I buy and try them?
Hey man,im making a quad with the same frame and 2910kv motors,when using a 6s battery should i limit the motor output?My motors are compatible with 4-6s batteries but i dont wanna damage them
@dongabi1876 that is a bit high for 6s, but it is doable. I would recommend a bit of a motor output limit.
@@MurdersFPV thx for the help man,I was wondering if u put anything on that quad but I assume u didn't
Sick flying! How much flight time are you getting with your set up? How much are the props in view?
Mines are unibell and really durable not sure if there is a 2760kb tho mines are Xing 2205 2300kv😊
How do you feel about 1505 motor 3450kv 4s for this build? Would that be enough for flying this with a naked GoPro?
I had the same problem with those Axis Flying motors. Split the bells on multiple. Don't recommend for people that do a lot of freestyle bashing.
So far I was exclusively flying 5" quads. However, your video inspired me to build a ""sub-5"-freestyle". Assuming 3.5" frame, 6S battery, w/o GoPro and 3.5" props, which motors would be the best choice? I cannot decide between 1507 and 1804 (5 mm shaft). Any suggestions?
1507 would be a bit more power, but the 1804 should be just fine. I'd go with whatever you can find that uses a fullsize prop nut.
Just ordered myself the f35 frame yesterday 😅 gonna slowly build it up over the next few months since I’m not in the best economical position to spend money so one part a month it is😭 but just wanna say thank you for posting videos on all the Quadmula frames I was so indecisive on which one I wanted other than knowing I wanted from them and on top of that their customer support is full of top tier people who actually care to help you solve any issues and will try their best. Was struggling for 3 days and they helped me thru it and even uploaded my shipping cuz of some issues. Great team and will have a forever customer from me too. Was wondering if either you murders or just anyone here watching like me with this frame if yall would recommend going the 4s route with the 1604 t motor motors or 6s with the 1605s or even the same 1604s?
I highly recommend sticking with what you're comfortable with. 1604 on 4s will definitely work. There's nothing wrong with that setup.
I tell people all the time that Quadmula has been the most ethical company I've worked with in the hobby. They have never escalated a situation, especially publicly. They will move mountains to offer support however they can. They are extremely generous and not just money hungry vilians trying to make a buck. They have never asked me to sensor anything about their frames, and they strongly encourage feedback from me and the community. They listen carefully to criticism, and they have always respectfully replied in detail and with a lot of thought in their words. It's why I'm honored to represent them as a sponsored pilot. They are pilots too who just want to make the best product they can and grow the community they love.
@@MurdersFPV wellll I’ve only started 2 months ago with tiny whoops and damn it’s been a journey this far but I’m power hungry for more but still will be using the whoops ofc. But hmm will probably do 4s so I can get the hang of it then later on maybe build the f5 6s😅
But oh yeah I could definitely say that it’s 100% true what you said first hand. Those guys are phenomenal and you aswell for keeping it truthful with us! Appreciate the feedback and response
@@TrippyFPV.I fly mine on 4s, Not using an external cam, just the O3 for recording, main goal, as light as possible and under 250g
With 4s and 1404 3800kV you will have a power house, which will serve you well and without additional cam it will be under 250g using 650mAh Tattu R-Line, naked Air unit, ViFly Mini for less time searching...
4s Lipo are a bit cheaper than going 6s
Does anyone know if you own the Siren F3 already, can you simply buy the 3.5” legs or was there more changes than between the 3” and 3.5” drone?
You can get just the arms. The rest is the same.
Bro you gotta tell me where you got that purple RR lanyard. Please tell me it wasn't some one time release thing 😭
Rotor Riot Rampage last year. They hand them out like candy.
Spring definitely coming 🙌🏼 the cold is killin me. I have the xnova 2203.5 on mine. Not 2204’s but close. I couldn’t imagine to much of a difference.
Beautiful ripage my friend🙏🏼
Blah blah blah
Amax 2004. 2400KV
Strong asf, 6S.
Nice build man❤
That opening move was sick. Watched it a few times through. Did that just happen? Or was it planned?
The power loop roll? I've always done that randomly, usually when I'm trying to cut a powerloop as close to an object as possible, and I'm worried I'll either hit it or not clear it. Everything I do is planned...in real time. 😅
@@MurdersFPV that’s a good one.
🔥🤙🏽
🎥💣👍
I've always wanted an F3 frame but I can't get Quadmula stuff from where I am. So I went with FlyfishRC Volador VX3.5 3.5" instead. I'm also using Gemfan 3630 with GEPRC 2105.5 and as you say it gives ample powah!!!
Great build man!
how many grams is that build? (including the 6s pack but not the action 2) i'm looking for a sub 250g drone!
RCinpower 2105 slightly more volume and slightly more kv. 100% more quality
RCinpower looks like a pretty great quality brand.