لقد قمت بتنفيذ شكل معقد بافكار بسيطة وهذا هو جوهر التصميم تحياتي لك 👍(you designed a complicated model using simple ideas and this is the core of designing my greetings to you )
There are very few SolidWorks videos I watch where I am compelled to say, let alone comment "that's f*cking impressive", but this is one of them! Very very efficient work-flow.
@@EasyCADSolutions You're welcome. I'm always looking at ways to increase my efficiency, and looking for ways to both reduce the number of steps to model a part, and maintain the capability to change it without breaking anything. I also noted on another video how you tidied up and aligned all the dimensions on your base sketch, something I am very OCD about too! 🤣🤣🤣
You built this part less than 15 minutes. :):). But it might took us couple hours or maybe can't figure it out how to build. You are brilliant. You shown us all tricks. Even after I watch you built it. I don't remember anything :):):). The most important things is when you look at the object. You already know how to build it. Thank you. Did you work for any famous company? The company has the most complex parts. :):). Thank you for the videos.
Actually, the video is of 15mins only but it needs so many hits and trials to come up with the finished video And, I am not working in any famous company, I work as a freelancer. Thanks for watching 🙏🏼
Excellent! I m really impressed by your design intent. For this plastic part how mould can be designed? What will be the parting line? Up & down or side by side? Regards...
@@EasyCADSolutions pls make the video by explaining the steps , it will make more easy & understandable hope u got the point. I'm exited and looking forward the same in next video .
I will try But video length gets doubled if i explain each and every step I will write blogs on these so that you will get a better idea of what's going on in the video Thanks for the Suggestion 🙏
Sir, I have a doubt instead of using move or copy to pattern why could we just use linear mirror pattern for that tool and then bend it and then use circular pattern???? And how do ypu get the idea to do that initial sketch. When i use solidworks i think just adding or subtracting component from the part i cant vet around that combine idea So please help Great video i learned a lot thank your
Yes, it also works but bending by flex takes too much time to generate the geometry and after bending it is very difficult to create the correct axis of rotation while using circular pattern And one thing more combining part by part takes less time than combining too many items at once And i get that idea by hit and trial method which is very useful to make complex designs
Ohh i see, if it doesn't work then you need to do this: th-cam.com/video/L0ehdL-Ttdc/w-d-xo.html Watch the video and try to follow the same I hope it will work for you Happy Modeling 😇
Good Catch, It's not Fully defined due to use of circular pattern but you can select any patterned spline and assign the FIX relation to it, This will give you a fully defined sketch And, Thanks for watching my Tutorials, Happy Modelling 🤗
how to make fleur de lys : make a magical thing that an inventor can not do :make sweep from a line of length 97,48934445 on circle line with a radius diameter 192,531067267 like this th-cam.com/video/ihM4uLzxeI0/w-d-xo.html must be rotated 3 times (1080) . on the line that was made make sweep this time line length is 49,36435671 and must be rotated 8 times (2880) .on the line that was made make sweep line length is 24,23707644 must be rotated 24 tims(8640),on the line that was made make sweep this time line length is 13,65984788 must be rotated 72 times (25920),on the line that was made make sweep this time line length is 4,90676221 must be rotated 216 times (77760),on the line that was made make sweep this time line length is 2.12469036 must be rotated 648 times (233280), on the line that was made make sweep this time line length is 1.22669055 must be rotated 1944 times (699840) , on the line that was made make sweep this time circle with dimeter 0,5886253 and make solid
I will do a video on fluer de lys. And, rest the explanation is quite brief and difficult to understand exactly. So, Kindly mail me some screenshots or images of what your are looking for. Thank You
The part up to where you used the combine tool got me off my seat.. You are a genius..
Thanks for watching 🙏🏼
Extraordinary ideas. I love the way it is done!
Thank you 😇🙏
لقد قمت بتنفيذ شكل معقد بافكار بسيطة وهذا هو جوهر التصميم تحياتي لك 👍(you designed a complicated model using simple ideas and this is the core of designing my greetings to you )
Thanks a lot🙏
And please do subscribe to my TH-cam channel and also share my videos to others so that they will get know about these tutorials 😇
There are very few SolidWorks videos I watch where I am compelled to say, let alone comment "that's f*cking impressive", but this is one of them! Very very efficient work-flow.
Thanks Man👍
@@EasyCADSolutions You're welcome. I'm always looking at ways to increase my efficiency, and looking for ways to both reduce the number of steps to model a part, and maintain the capability to change it without breaking anything. I also noted on another video how you tidied up and aligned all the dimensions on your base sketch, something I am very OCD about too! 🤣🤣🤣
Sou um usuário novo do Solidworks e tenho aprendido muitos comandos novos através dos seus vídeos, definição de padões e abstração. Muito obrigado.
I am glad to hear this☺️
really enjoy the music and doing this along the video
Thanks 🙏 For watching my videos
You built this part less than 15 minutes. :):). But it might took us couple hours or maybe can't figure it out how to build. You are brilliant. You shown us all tricks. Even after I watch you built it. I don't remember anything :):):). The most important things is when you look at the object. You already know how to build it. Thank you.
Did you work for any famous company? The company has the most complex parts. :):). Thank you for the videos.
Actually, the video is of 15mins only but it needs so many hits and trials to come up with the finished video
And, I am not working in any famous company, I work as a freelancer.
Thanks for watching 🙏🏼
So much unique design ....no one can match your youtube channel 🔥
Thank you so much for your feedback 😊
Excellent! I m really impressed by your design intent. For this plastic part how mould can be designed? What will be the parting line? Up & down or side by side? Regards...
For the mold making we need to modify the model first and then make the mold
Because this geometry is only 3d printable
The Example is very professional.To understand,l will watch its five times.Thank you very much.(in İstanbul)
Most Welcome 😇
And, Thanks 🙏 for watching my videos
great😍😍
Thank you 🙏 🙏
Keep Supporting 🙏🙏
This is awesome, great video!
Thanks 👍
THANKS IT IS VERY GOOD JOB
Thanks 🙏
Awesome your imagination and creative thinking..!!
Thanks 🙏
Awesome . 👍
Thanks 🙏
Great ... From where did u learned these skills ? Online or what ?
Thank you 😇, i searched ideas on internet and then implement it by hit and trial in solidworks
@@EasyCADSolutions pls make the video by explaining the steps , it will make more easy & understandable hope u got the point. I'm exited and looking forward the same in next video .
Really nice work in youtube channel i love this work
Thank you 🙏🙏
You are unbelievable
Thanks 🙏
Amazing bro😍😍😍😍
Thank you 😇
Incredible skils love it & keep it up
Please tell us with voice comand while designing
I will try
But video length gets doubled if i explain each and every step
I will write blogs on these so that you will get a better idea of what's going on in the video
Thanks for the Suggestion 🙏
Very nice modeling.
Thank you, And Please subscribe and share these videos to others so that they will also know about these tutorials 😇
It's amazing sir 😍😍😍😍😍👍👌
Thank you 😇
Really nice work
Thank you 🙏
Amazing Thank you very much
Welcome 😇
Such a nice work from the city of sirgical instruments sialkot
Thanks 🙏
Keep Supporting Guys 🤗
You deserve more subscribers more likes more shares more views i like your work sir and more over your speed of work
Thank you so much for your compliments 🤗🤗
Wonderful man ) thanks for share for us
Welcome 😇
And, Thank you for Watching 🙏
Great job 👌
Thanks 😇 And, please subscribe to my channel and also share these videos to others so that everyone will known about them.
Обалдеть.
А нет более простого способа делать такие невероятные узоры?
That's the easier way
When you use any command please explain that.
Okay 👍, Thanks for your valuable comment 🙏
Sir,
I have a doubt instead of using move or copy to pattern why could we just use linear mirror pattern for that tool and then bend it and then use circular pattern????
And how do ypu get the idea to do that initial sketch. When i use solidworks i think just adding or subtracting component from the part i cant vet around that combine idea
So please help
Great video i learned a lot thank your
Yes, it also works but bending by flex takes too much time to generate the geometry and after bending it is very difficult to create the correct axis of rotation while using circular pattern
And one thing more combining part by part takes less time than combining too many items at once
And i get that idea by hit and trial method which is very useful to make complex designs
@@EasyCADSolutions thanks for reply sir
Really amazing... #ideas
Thank you for watching 🙏🏼
Does this help you to make an actual fruit basket ?
I didn't manufacture fruit basket😅
I don't have real view graphic option...how to enable it?
Yes, Because it only supports high end specifications or the laptop which are made for 3d modelling works
How do i get mirror appearance theme?
You need to activate the Real View in Solidworks
It is excellent. Thank you very much.
Thank you 😇
If you think it is helpful then share it with others, so that they will also learn about this.
@@EasyCADSolutions How to determine this angle (7.5 deg) (time 3.05 & 4.07)
What is that dimension 25?
Could you explain a bit more?
Real graphic view not showing but I install G-Force gt 1030 graphic card amd A4 6300 apu processor what to do?
Ohh i see, if it doesn't work then you need to do this: th-cam.com/video/L0ehdL-Ttdc/w-d-xo.html
Watch the video and try to follow the same
I hope it will work for you
Happy Modeling 😇
Awesome!
Thank you 😇, please subscribe to my channel and also share these videos to others so that everyone will known about them.
good video
great job
Thanks 😇, And please subscribe it and share my videos to others so that they will also get know about these tutorials
You are awesome.
Thanks 😇
at 1.06 sec is sketch is fully defined?
Good Catch, It's not Fully defined due to use of circular pattern but you can select any patterned spline and assign the FIX relation to it, This will give you a fully defined sketch
And, Thanks for watching my Tutorials, Happy Modelling 🤗
This is so nice . You must work really hard! let's be friends
Thanx
Welcome 🤗
How you learnt these skills?
From TH-cam videos and then implement the idea with some imagination.
@@EasyCADSolutions 😄 keep doing
Subscribe this for detailed solidworks study th-cam.com/video/kvXpFyKZyGc/w-d-xo.html
thank u sir
Welcome 😇
Very nice
Thank you 😇
excellent
Thank you 😇
thanks
Welcome 😇, and please do share my videos in other groups so that other will also known about this
wow nice
Thanks 😇
Please share if you think it is helpful
Amazing
Thank you 😇
👏👏👏👏
Thanks 😊
Sar power shape
Power Shape???
If you have any queries contact me via WhatsApp +919793662583 or mail me at nishant13071992@gmail.com
♥
Put voice
It will try to put in my upcoming videos
how to make fleur de lys :
make a magical thing that an inventor can not do :make sweep from a line of length 97,48934445 on circle line with a radius diameter 192,531067267 like this th-cam.com/video/ihM4uLzxeI0/w-d-xo.html must be rotated 3 times (1080) . on the line that was made make sweep this time line length is 49,36435671 and must be rotated 8 times (2880) .on the line that was made make sweep line length is 24,23707644 must be rotated 24 tims(8640),on the line that was made make sweep this time line length is 13,65984788 must be rotated 72 times (25920),on the line that was made make sweep this time line length is 4,90676221 must be rotated 216 times (77760),on the line that was made make sweep this time line length is 2.12469036 must be rotated 648 times (233280), on the line that was made make sweep this time line length is 1.22669055 must be rotated 1944 times (699840) , on the line that was made make sweep this time circle with dimeter 0,5886253 and make solid
I will do a video on fluer de lys.
And, rest the explanation is quite brief and difficult to understand exactly. So, Kindly mail me some screenshots or images of what your are looking for. Thank You
@@EasyCADSolutions I don't have your email my email is zico169@yahoo.com
My Mail Id: nishant13071992@gmail.com
Send me on this forgot to mention it.
Vreryy coiool now give me thge fikles
Please rename your channel
It isn't easy LOL
For me 😐
Rename?
Really?
Could you tell me why??
@@EasyCADSolutions your video isn't for beginner like me
@@EasyCADSolutions the path and guide is very fast h3h3
Okay, i will make upcoming videos it in slow pace