You are a true bmw master, it looks like you’ve done this a thousand times. Everything you did was calculated and sure, no fumbling. I know that it took you longer to set up the camera than the actual work, thank you for that, I’ve been looking for a tear down like this for a long time.
@@shiroh73 Please do share your method of organizing parts for such an ambitious and inspiring project. I thoroughly enjoy watching your videos; thank you for posting them.
Great work. It’s always a pleasure to see 46works notification ! You made awesome videos (audio, picture and editing) as you made awesome bikes. Domo arigato.
Nice work! I m doing my third flat bmw but always good to watch a complete disassembly A lot of parts to check to organize and to change! Keep going can’t wait to see what you gonna do with this one! Moum’s from france
LOVE IT!!!!!!! Excellent video :) You were really lucky with the gudgeon pins [wrist pins]. On my R65 they were stuck in so tight I had to use a press to get them out of the pistons. And that second engine mount bolt that you had to hammer out - ALL mine were like that, I had to soak everything in CRC... I am looking forward to your next video! Thanks, from Australia.
U have one of the best video edits and craftsmanship. Would like to see some new school add ons like fuel injection or superchargers where possible. Or mixing up parts like swingarm from other makes.
I am in awe that you managed to get all of those plastic connectors disconnected without breaking a single one; especially with how old the bike looks like. Please share your secret of how you managed to get so lucky, because I have broken those connectors when they are only a few years old, much less decades old.
Same here! Only discovered this channel last week. It makes a refreshing change from all the usual shouty, noisy videos that most people seem to make. Subscribed!
A fascinating video. Good work. You disassembled the connecting rods before you removed the engine. I have never seen that before. Is this procedure specific to BMW? Take care.
Все красиво и качественно. Но! Тягу на тормоза и крепление тормозов надо переделать , потому что при торможении ее будет сдавливать, а при большом весе мотоцикла просто согнется. Тягу надо делать на разрыв. Таким образом надо отпускать тягу вниз
É um motor robusto... Parece complicado mas é mais simples do que imaginei. Nada como um manual de serviço pra passar os macetes, como qualquer motor... chego a seguinte conclusão quanto maior o motor...melhor pra trabalhar. Parabéns gostei muito do conteúdo do seu vídeo. Fazendo o favor manda a segunda etapa do vídeo. Desde já muito obrigado.
![[A's BMW vol.2] Disassembly of engine and gearbox BMW R100RS エンジンとミッションの完全分解 [ASMR]](http://i.ytimg.com/vi/S8pxxfb1QXE/mqdefault.jpg)
![[A's BMW vol.2] Disassembly of engine and gearbox BMW R100RS エンジンとミッションの完全分解 [ASMR]](/img/tr.png)
![[A's BMW vol.11] Engine & Gear Box build.エンジン＆ミッション組み立て。BMW R100RS](/img/n.gif)
旧車だと固着したネジ舐めたり、プラ部品割ったりとやらかしがちですが
使い込まれた工具の使い方と手の動きが非常に綺麗で見ていて気持ちがいいです。
こんな職人になりたいと思う動画ですね。
ありがとうございます！
You are a true bmw master, it looks like you’ve done this a thousand times. Everything you did was calculated and sure, no fumbling. I know that it took you longer to set up the camera than the actual work, thank you for that, I’ve been looking for a tear down like this for a long time.
まるで生き物と対話しているかのような、作業の流れ。
すべて指先が覚えている、しなやかで芸術的な動きに圧倒され、また
残念ですが現代のバイクでは味わえない世界とも感じました。
素敵な動画をありがとうございます。
リズミカルな手際の良さと作業音がまさに音楽的でした。とても心地良かったです。
次回をまた楽しみにしてます。
ありがとうございます、またぜひご視聴ください！
4:52コンロッドに対する気の使い方、素晴らしいと思いました🙇♂️
素人ながら自分でも作業するときに色々と気配りや整理整頓された環境など勉強になります。
次回も楽しみにしています。
細かいところまで見ていただきありがとうございます！
素晴らしい作業でした。
あっという間の13分でした次の動画も楽しみにしてます。
ありがとうございます！またぜひご視聴ください。
ものすごく手際もいいですし、一見固着しているように見えるボルト・ナットがパキン一発の後すぐ手で回るあたり、素性も手入れもいいバイクなのかなと思いました。
Thank you, your video is very relaxing. A quick escape from this stay at home situation. Cant wait for the next one
Thank you for watching!
100% could watch this ALL DAMN DAY
作業音が耳に心地よいです♪
まるでエンジン縦置きのFR車にそのまま跨がる様なレイアウトですね。合理的と言うか独特と言うか、流石ドイツ車♪
こういう作業動画好きです！これからも楽しみにしてます！
ありがとうございます！
professionalのお仕事って見応えありますね！無駄のない動きと力加減！今後も楽しみにしています❕
ありがとうございます！
手際がよくて、つい見入ってしまいました！憧れます！！
ありがとうございます！
お疲れ様です！
大好物動画ありがとうございます！！
堪能させていただきました。
ご馳走さまでした！
ご視聴ありがとうございます！
He disassembles it so quickly and gracefully that it makes you think he's done it a thousand times before.
Thank you!👍
When mechanical skills meet art...nice job Shiro, keep videos coming! :)
👍
I am excited to see how you will restore the engine covers! All the best from New Zealand!
Thank you!
この作業音は音楽のようです！見て聞いて心地よい映像！
one of the best yt-channels - thx for uploading - Greetings from Bavaria :)
Thank you for watching!
こんなこと自分じゃしたことないし、しようとも思わないんだけど見てて飽きない。手際がよくて見てて楽しいし音がまた気持ちいい。男は本能的にこうゆうの好きなんでしょうか？
ありがとうございます！
あーこれはいいですねー
余計なbgmつけないのポイント高いです
作業音が心地いい♪
ありがとうございます。
Great job tearing down that motor. What is your method of organizing parts for reassembly?
Thank you.May appear in future videos.
@@shiroh73 Please do share your method of organizing parts for such an ambitious and inspiring project. I thoroughly enjoy watching your videos; thank you for posting them.
Great work. It’s always a pleasure to see 46works notification ! You made awesome videos (audio, picture and editing) as you made awesome bikes. Domo arigato.
Thank you!!
Beautiful. Brings back so many memories of working on Boxers in my 20s. Thank you!
Thank you!
Amazing work! Very organised and detailed.
Thank you!
Nice work! I m doing my third flat bmw but always good to watch a complete disassembly
A lot of parts to check to organize and to change!
Keep going can’t wait to see what you gonna do with this one!
Moum’s from france
Thank you!
作業も映像もチェストもキレイ、、
その都度画角合わせながら作業するのはすごく手間だと
よく解ってるので余計に尊敬です、、
また次回も楽しみにしてます
作業着は着ない派ですか？
ありがとうございます。撮影しながらの作業は慣れっこなので、自分的にはそんなに手間ではありません。ネルシャツにGパンが、ここ５年くらい作業着ですw
LOVE IT!!!!!!!
Excellent video :)
You were really lucky with the gudgeon pins [wrist pins].
On my R65 they were stuck in so tight I had to use a press to get them out of the pistons.
And that second engine mount bolt that you had to hammer out - ALL mine were like that, I had to soak everything in CRC...
I am looking forward to your next video!
Thanks, from Australia.
Thank you!
Love the disassembly Shiro-san. I'm a fan!
Thank you!
Great videos! I didn't know you could do ASMR videos of working on motorcycles, Im always cussin' up a storm and yelling.
This is very cool to watch, both relaxing and informative, thank you for putting the time and effort on so cool shots! Cheers from France!
Thank you!
U have one of the best video edits and craftsmanship. Would like to see some new school add ons like fuel injection or superchargers where possible. Or mixing up parts like swingarm from other makes.
Thank you! I try a little new with this vehicle.
Cool stud-removing tool! will make one for my VW engines I think. Thks!
👍
Finally the one I was waiting for 👍arigato guzaymas
Super super super exercices de mécanique vraiment très instructif je suis fan à 100 % merci beaucoup
Je vous remercie
I am in awe that you managed to get all of those plastic connectors disconnected without breaking a single one; especially with how old the bike looks like. Please share your secret of how you managed to get so lucky, because I have broken those connectors when they are only a few years old, much less decades old.
The old BMW connector is durable.
I really like the way you disassembled the Con rod big-end, very clever.
Super vidéo, comme d'habitude !
On voit que vous les connaissez bien ces moteurs !!
Je vous remercie
You seem to have intimate knowledge of this bike. Your skill level is very high and makes the video even more enjoyable.
Video quality and flow is amazing. Loved watching this
it makes a nice change to not have generic super energetic music playing over everything.
👍
Awesome video! This is art , not mechanic. I want more.
Thank you!
Impatient to see the next.... good job without music great
Thank you!
I only discovered your channel yesterday. Thank you, it’s wonderful.
Thank you!
Same here! Only discovered this channel last week. It makes a refreshing change from all the usual shouty, noisy videos that most people seem to make. Subscribed!
Documentary video..felt so relaxed..!!
Thank you!
I like your work Mr 46. Please make a video on what hand tools that you use, the brand of your wrenches, ratchets etc. Thank you ❤️
so soothing.. love this!!!! and a special thank you for Not putting any background music hahaha
I am a big fan of your work, thank you for all the videos you make! Keep up this amazing channel.
Thank you!!
your channel is growing fast! Good Job, Shiro!
Thank you!
Respect from Russia! 👍
Thank you!
BMW って合理的に出来てますねぇー、車体に載った状態でここまで分解出来たら、一人でも下せますねぇー
もともとBMW航空機メーカーだったところでしょうね、ちなみにBMWのマークは、プロペラの、イメージマークです。水平対向エンジンのスバルも、零戦の、血を、ついでいますね、
A Master at work, You and your work are awesome.
Thank you!!
Congratulations on your rising subscription count, me being one of them. Looks like you live in a beautiful part of japan.
Thank you for subscribing!
Watching these videos is like meditation. Thanks!!!
Thank you!!
A pleasure to watch! You're a real pro. Many thanks!
Thank you for doing this. Such an enjoyment to watch art come together
Thank you!
Es un privilegio verle trabajar. Muchas gracias!
Good job!! clean and easy
👍
i love what you doing with every part of this car, uncle 46, is very amazing. Great job
Thank you!!
A fascinating video. Good work.
You disassembled the connecting rods before you removed the engine.
I have never seen that before.
Is this procedure specific to BMW?
Take care.
Thank you.Can work more stably in this order.
Great job you have obviously bone that a time or 2 before looking forward to the series
👍
Greetings from Poland. Well done. Great ideas !!!
Thank you!
I love your videos, great work, keep it up, greetings from Spain
Thank you!
Great job, I'm excited to see the result💪👍
Thank you!
👏👏👏 I like his videos, it seems that we are in his workshop. I do not rate him as 10 because he lacks the good music that we are used to.😂✌
😂✌
Felicidades Shiroh. Excelente video, excelentes herramientas. Yo digo que es perfecto todo.
Gracias
Thank you for sharing your excellent work with us. Congratulations on the channel.
Excellent! Are you going to vapour blasting the engine to clean it up?
Yes,I will blast.
音がたまらん
This guy probably doing this for 100 times . He knows for sure what he's doing
I have done it over 300 times,hahaha!
@@shiroh73 nice work 👏 .wish you luck
master technician indeed
👍
This is like visual meditation. Thank you.
Pure art. Thank you so much.
Thank you!
I really enjoy your videos! Thank you
Thank you!
すごく手際良いですね！
カメラって何を使っているんですか？
ありがとうございます。SONYのα7Ⅱです。
If I had the possibility i'll give you my bmw r60/7 1977 for restoration. Great work.
Thank you!
What camera do you use in your videos? Love the content! Great quality
Wow 👍Looks like you could do this with your eyes closed 😎
How many engines have you rebuilt ? Must be quite a few.....
Great video series 🏍👍
Maybe hundreds.
貴重な映像ですね！セル外すときに使ってるフレックスソケットレンチってどこのメーカーのものですか？？
ありがとうございます。フレックスはスタビレーです。
I saw your video and the video quality is awesome
Thank you!
Fantástico trabajo 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻✊🏻✊🏻✊🏻👍🏻saludos desde España 🙋♂️
Gracias
Amazing work !
Thank you!
Great video. Comgratulatio from Brazil.
Thank you!
Whats your camera - lens - mic set up? I love the sound quality.
Sony α7Ⅱ&Sony 35mm f1.8 & Tascam TM-2X mic.
Great job! keep posting
Thank you!
Well done my friend
Thank you!
Nice work
Все красиво и качественно. Но! Тягу на тормоза и крепление тормозов надо переделать , потому что при торможении ее будет сдавливать, а при большом весе мотоцикла просто согнется. Тягу надо делать на разрыв. Таким образом надо отпускать тягу вниз
эт все херня скажи как грамотно мотор продуман не то что наш
Great work,
Thank you!
Famous last words: "That's easy, I can do that as well..."
Wonderful videos, enjoyed every one I've watched. Who makes the folding combination socket/Wrench?
Muy buen video!! El ruido de las herramientas es incluso mejor que la música. Tengo ganas de ver la revisión de la caja de cambio
👍
Smooth and clean. When you diassembling piston pin.
👍
Wonderful video making
I wish all the videos were like this. I will use this info soon.
É um motor robusto... Parece complicado mas é mais simples do que imaginei. Nada como um manual de serviço pra passar os macetes, como qualquer motor... chego a seguinte conclusão quanto maior o motor...melhor pra trabalhar. Parabéns gostei muito do conteúdo do seu vídeo. Fazendo o favor manda a segunda etapa do vídeo. Desde já muito obrigado.
cool shiro-san 👌👍
Thank you!
Very therapeutic.
👍
Very enjoyable.
素晴らしい。