Congrats on your work, but I have a few suggestions if you don't mind :D You should use a mouuld for the lcd, so it won't be so messy with this UV liquid glue. And seperating the glass with the wire...you scratch the middle frame this way...and it must be hot all the time and should never be under 105C, otherwise the glue stays strong and the glass is harder to remove. The best is a lcd seperator with digital temperature adjustment. You have been lucky this time...you could break the lcd also. But you made it :)
CrocFIX may i know What type of mould please? can i use hairdryer instead of hot gun? can i just replace the glass bcause my touch still working fine..
hey man, i recently broke my new a5 2016... not the display itself, but the glass on the bottom left corner... is this a safe method? everything works, so i wouldnt want my phone to stop working... thx
ayuda superfull !! mi celular moto g 4 plus no prende la pantalla esta en negro solo prende la luz del led y la pc en administrador de dispositivos solo me lo reconoce como qualcom, tambien intente con blank flash y tampoco esto me paso cuando le cambie la rom intente con este tutorial pero no me sirvio me pone ( waiting for device ) , si me yludas te lo agreceria mucho!!
hizo todo bien solo que le metió mucha fuerza a los bordes por eso daño la parte de abajo del display, también la goma se excedió en la cantidad pero lo hizo perfect.
Lo marco todo a ese modulo, si es para cambiar porque esta roto esta bien, pero si hay que reparar placa y ese modulo anda bien, queda para la basura porque lo marco todo
escuse me, this glass is a touchscreen or only its a normal glass, becuase my touchscreen move alone, and another times cant press, so, need a glass or lcd complete? (sorry for my bad english)
+Edward Grayclaws Official It is necessary to disassembly all parts, becouse LOCA glue will damage some of these. Of course, it is possible, but I recommend to remove all parts and then put LOCA glue :)
+eliot martinez Do You think about removing glue form the screen? I am using dispergator and isopropanol alcohol (99%), or just a finger :D Best regards from Poland !
+eliot martinez You said "remove". I don't understand You very good, but for glue new glass I'm using LOCA. For separating the glass I'm using molybdenum wire and flexible metal.
Amigo soy técnico profesional, y sinceramente sin molestar, te diré que hiciste pelota el teléfono el para ser exacto, el Display quedo marcado y la cantidad que pones de pegante es absurda, otro consejo que te doy, los flex delgados a excepción de los de display se conectan antes de montar la board, eso que haces con el destornillador ante cualquier estática que ni guantes usas dañas cualquier componente de la board, la cinta doble fas se coloca ademas como costillas bajo el display, no es suficiente para los bordes solamente, solo son algunos consejos, continua estudiando, saludos. Si fuera tu cliente no te pago el arreglo, sin ofender.
I have broken my galaxy a5 very badly. I have broken the front screen and now I don't have any display. But my phone still vibrates if I get a call or put it in charge . Can it be fixed ?
You should've put tempered glass before on your a5 so that you shouldn't worry anymore about replacing the original glass but instead the tempered glass 😀
Verbrannte Displays bzw Polarizer sind dein Markenzeichen, oder? Das sah bei dem Note Edge Video schon sehr abenteuerlich aus und hier wieder. Diesen Gasbrenner halte ich nicht für optimal. Ich hoffe es macht kein anderer nach :)
+Smyk1190 Niestety nie. To już mój błąd że nie użyłem stacji lutowniczej.. Gazówka osiąga temperaturę 1300 stopni i niestety taki mamy potem efekt. Fakt że jest bardziej wygodna w użytkowania ale mimo wszystko polecam stację lutowniczą lub suszarkę :D
No właśnie miałem pisać na ten temat, że zrobiłeś plamy ;) Ekraniku przed LOCA też do końca niezbyt ładnie wyczyściłeś. To nie jest potem widoczne, że takie upaćkane zostawiłeś?
hi, i got my A5 fixed (i had dropped it and the screen cracked) a month ago but from the day i got it fixed the screen heats up on the top right side (the front camera side), it heats up when i use the phone for too long and just yesterday the screen went blank, the phone is working but the screen is black. what could the problem be?
Бляяя, что он сделал? Огненной горелкой греет экран, ну ладно ты стекло погрел, но сам амолед куда ты греешь? Взял испортил дисплей. Не знаю кто еще за такую работу заплатит и заберет телефон. Не обезжирил дисплей и сразу наносит клей, протереть стекло это поставленное и весь дисплей замазан. Руки тебе за такую работу отбить.
Мне интересно сколько народу по этому же методу уже вылетело на телефон, надеюсь у всех мозги работают и понимают что так делать нельзя 🤦♂️🤦♂️🤦♂️🤦♂️🤦♂️
Добро пожаловать, котор нужно связаться мы. Мы профессиональная фабрика для машины ремонта LCD и частей, инструментов. WhatsApp: +86 13682503305 Электронная почта / Skype: amy@tuolitech.com.
Only glass replacement within the worst method as can I saw... but if this work it's ok :) Unfortunately not for me and my quality knowledge and skills...
amigos quiero que me ayudennnnn help please , instale un rom stop personalizada , y quiero volver a mi firmware original y me sale fail en odin , en z3x , no allo que hacer , me meti con twcp y cambie el filesystem y de verdad no se en que formato va la memoria cache , la data , y el sistema , yo lo configure a f2fs pero nada quien me ayuda por favor , mi tlf es un j7 prime de la variante SM-G610M
Amigo primero no es Rom stop, es Rom Stock, y si es personalizada no es Stock "O sería official" ese error te lo da por diferentes razones, la mas común no coincide con tu modelo, la peor es que intentas colocar una Stock con diferente Binario, recomiendo descargues Firmware correspondiente a tu modelo y para saber el Bin Inicia en recovery mode, salu2
we do this every day with thousands of euros machines. you do this with allmost nothing. Respect for you bro. Boss
Liquid glue. Now OCA glue. Glad to see this video. Miss yesterday much.
Чувак выбрал самый брутальный метод снятия стекла😄
Congrats on your work, but I have a few suggestions if you don't mind :D You should use a mouuld for the lcd, so it won't be so messy with this UV liquid glue. And seperating the glass with the wire...you scratch the middle frame this way...and it must be hot all the time and should never be under 105C, otherwise the glue stays strong and the glass is harder to remove. The best is a lcd seperator with digital temperature adjustment. You have been lucky this time...you could break the lcd also. But you made it :)
65c is enough!!
may i know What type of mould please?
can i use hairdryer instead of hot gun?
can i just replace the glass bcause my touch still working fine..
CrocFIX may i know What type of mould please?
can i use hairdryer instead of hot gun?
can i just replace the glass bcause my touch still working fine..
@@janzlee the red mould you can find on ebay
Hey, good video! How is the glue on this model? Is it hard to get loose like with the S5 or does it get loose easier like with the S3?
hola amigo porque no cambiaste el polarizado que se quemó de dónde eres me gustaría saber y ayudarte en algunos tips
hey man, i recently broke my new a5 2016... not the display itself, but the glass on the bottom left corner... is this a safe method? everything works, so i wouldnt want my phone to stop working... thx
good job
thank you
holy fck it really work 100% no joke people. my note4 was dead for 1 year until now. thank you. i made a small donation.
ayuda superfull !! mi celular moto g 4 plus no prende la pantalla esta en negro solo prende la luz del led y la pc en administrador de dispositivos solo me lo reconoce como qualcom, tambien intente con blank flash y tampoco esto me paso cuando le cambie la rom intente con este tutorial pero no me sirvio me pone ( waiting for device ) , si me yludas te lo agreceria mucho!!
does j5 16 similarly have glass above the lcd like this one?
Good job
What kind of adhesive you use or what is the name..?
hizo todo bien solo que le metió mucha fuerza a los bordes por eso daño la parte de abajo del display, también la goma se excedió en la cantidad pero lo hizo perfect.
excelente
men i have deadpixel and i brought it to samsung are they gonna replace only lcd? or is it assembly including the gorilla glass
Lo marco todo a ese modulo, si es para cambiar porque esta roto esta bien, pero si hay que reparar placa y ese modulo anda bien, queda para la basura porque lo marco todo
master2011@hotmail.com rodriguez i need too dispaly a8
Лучшее видео!
escuse me, this glass is a touchscreen or only its a normal glass, becuase my touchscreen move alone, and another times cant press, so, need a glass or lcd complete? (sorry for my bad english)
lcd complete if your touch dont work
God bless you
Wait, are You from Poland? Nice vid. by the way.
Yes, Polska rządzi i chuj.
Dzięki 😁
@@JerryMobilePL Nie ma za co:P
do you really need to dissasembly all those little parts and stuff for only glass reaplecement? or can i skip part of your procces? if not, why not?
+Edward Grayclaws Official It is necessary to disassembly all parts, becouse LOCA glue will damage some of these. Of course, it is possible, but I recommend to remove all parts and then put LOCA glue :)
i recommend using a lighter fluid to soften the adhesive between the screen and lcd
very good
No me gusta el video, dañaste el display con el calor que le tiraste, se nota claramente dos manchitas en la pantalla.
exacto con esos pasos , le tocara pagar la pantalla
this tuches are not in market.. Where is it?
What materials do you use to remove friend greetings from Mexico Crystals : D
+eliot martinez Do You think about removing glue form the screen? I am using dispergator and isopropanol alcohol (99%), or just a finger :D
Best regards from Poland !
I say that the material you use to make the glass glue not see that use a feeler and more use? Portable torch ?
+eliot martinez You said "remove". I don't understand You very good, but for glue new glass I'm using LOCA. For separating the glass I'm using molybdenum wire and flexible metal.
ok ok thanks
Amigo soy técnico profesional, y sinceramente sin molestar, te diré que hiciste pelota el teléfono el para ser exacto, el Display quedo marcado y la cantidad que pones de pegante es absurda, otro consejo que te doy, los flex delgados a excepción de los de display se conectan antes de montar la board, eso que haces con el destornillador ante cualquier estática que ni guantes usas dañas cualquier componente de la board, la cinta doble fas se coloca ademas como costillas bajo el display, no es suficiente para los bordes solamente, solo son algunos consejos, continua estudiando, saludos. Si fuera tu cliente no te pago el arreglo, sin ofender.
Bro can I replace the broken glass back of Samsung Galaxy A5 2017 ???
plzzzzz Replyyy
plzzzzzzzzzzzz
Chicos una pregunta como se llama ese sujetador me interesa comprarlo pero no se como se llama??? alguien me puede ayudar
Jaki koszt takiej wymiany?
Samsung Galaxy a56 ki panel ki price ka h
what if the back phone cover doesn't come off?
good bro
It was worth it in 2015....now the full LCD body panel costs around 30 euros...not worth the hassle
Legal a demonstração da desmontagem, porém não ficou com qualidade o serviço !!
What's that u put on the lcd before u put on the replacement glass
+ash ran It's a LOCA glue (Liquid Optically Clear Adhesive)
how many MLs of glue need?
I have broken my galaxy a5 very badly. I have broken the front screen and now I don't have any display. But my phone still vibrates if I get a call or put it in charge . Can it be fixed ?
yes but you will have to replace the whole screen with the digitizer. lucky for you, that is easier to do that just the glass but costs a bit more.
You should've put tempered glass before on your a5 so that you shouldn't worry anymore about replacing the original glass but instead the tempered glass 😀
thANKS
NO SE USA ESE SOPLETE AMIGO SI NO LAS CONSECUENCIAS SERAN ESE PAR DE MANCHAS EN LA LCD ! SALUDOS
Bueno al menos no pago por el trabajo .....deves tener mas cuidado con la pantalla y la limpieza interna.....buen trabajo
Verbrannte Displays bzw Polarizer sind dein Markenzeichen, oder? Das sah bei dem Note Edge Video schon sehr abenteuerlich aus und hier wieder. Diesen Gasbrenner halte ich nicht für optimal. Ich hoffe es macht kein anderer nach :)
algún teléfono donde te pueda localizar
Help pls Samsung A5 mobile screen and glass change can you help me Now
Te plamy co się pojawiły podczas odklejania szkła zeszły po jakimś czasie?
+Smyk1190 Niestety nie. To już mój błąd że nie użyłem stacji lutowniczej.. Gazówka osiąga temperaturę 1300 stopni i niestety taki mamy potem efekt. Fakt że jest bardziej wygodna w użytkowania ale mimo wszystko polecam stację lutowniczą lub suszarkę :D
No właśnie miałem pisać na ten temat, że zrobiłeś plamy ;) Ekraniku przed LOCA też do końca niezbyt ładnie wyczyściłeś. To nie jest potem widoczne, że takie upaćkane zostawiłeś?
Bhai me a5 6 me display dalwaa rha hu wo keh rha Hal display ki brightness badegi ya ghategi nhi
hi, i got my A5 fixed (i had dropped it and the screen cracked) a month ago but from the day i got it fixed the screen heats up on the top right side (the front camera side), it heats up when i use the phone for too long and just yesterday the screen went blank, the phone is working but the screen is black. what could the problem be?
remplace the whole screen
maybe a short in some component of the screen
but it can be the phone have a short
y esto es lo que pasa cuando no se usa las herramientas que son !
What is the price
Бляяя, что он сделал? Огненной горелкой греет экран, ну ладно ты стекло погрел, но сам амолед куда ты греешь? Взял испортил дисплей. Не знаю кто еще за такую работу заплатит и заберет телефон. Не обезжирил дисплей и сразу наносит клей, протереть стекло это поставленное и весь дисплей замазан. Руки тебе за такую работу отбить.
Мне интересно сколько народу по этому же методу уже вылетело на телефон, надеюсь у всех мозги работают и понимают что так делать нельзя 🤦♂️🤦♂️🤦♂️🤦♂️🤦♂️
totalmente fora dos padrão técnico
very easy Samsung A5 remove class
Hola buenas tardes una pregunta porque mi cel ya no avanza nada más de queda en el logo de Samsung y no es sower
где его приобрести стекло как у тебя?на aliexspress не нашел,напиши цену и де купить пожалуйста очень надо
Добро пожаловать, котор нужно связаться мы. Мы профессиональная фабрика для машины ремонта LCD и частей, инструментов. WhatsApp: +86 13682503305 Электронная почта / Skype: amy@tuolitech.com.
Hp samsung saya rusak A5 juga. Siaran ini baik untuk pemirsa layanan you Tube.. Di mana ya di Medan reprasi seperti ini.. Trims you tube
good
Eres la leche
No 2016, it's 2015 year
Sir where i can buy gorila glass 4 in a7 2017
thats a risky procedure .you must first remove the lcd from frame the you put on a hot plate withe vaccum sunction pump.the you sererate
A bit brutal using a blow torch but I think you now know that. Its a shame you cannot put experience on young shoulders.
donde puedo conseguir la pantalla de mi galaxi alpha
Give the link of glass
nice
Samsung Galaxy A5 2016?
Bhai ye kitna rupia ka h
Quanto fica pra trocar creio que o meu tenha quebrado so o vidro superior
Samsung galaxy a5 2016 front glass price
200
oca
Amigo como se llama ese liquiiido que le hechas ala pantalla pa que pegue con el glasss :/
se llama cola loca, o uv loca
+Nigel Govetto Castrejon cola loca?? no tienes idea viejo
gel uv se llama es un principiante , quemo el polarizado y no se le da calor con fueego sino con aire o con una maquina para quitar glass
martin garcia
como se llama el alambre ese delgadito?
sergio xala Look at this on eBay www.ebay.com/itm/271328437299
Galaxy A5 / A5 2016?? -2015
A5 display is available I need a display
Please help me
pls can i know how much cost the screen pls
if you ever kneew
please let me know
esta bien, solo trata de darle calor con una plancha en vez de piiistola de calor, supongo que ahora eres mejor, si es del 2015 ese video... (8
2:20 to niezła chamska reklama...
Ps. Yes, this is Poland.
good work but you didnt have to demount everything once the glass is off
nazamch
There's two yellow spot on the display..you pressed too hard on it when you removed the glue.
no because the lighter he use
most youtube videos about fixing things are full of lies
Deu este error ' DTim.Recovery FAILL ' como solucionar ?
u choose the hard way
Anyone else skin crawl when he was using that razor blade? 0_0-!!!
Крайне криво, еще и стекло на грязный дисплей, заколхозил. Зато берет дешево полюбому
Да но дело в том что спалил дисплей! К чертям собачим xD
СПАСИБО ТЕБЕ БОЛЬШОЕ ТЫ МЕНЯ СПАС ЧЕСНОЕ СЛОВА Я ТОЛЬКА КУПИЛА ТЕЛЕФОН И Я ЗАБЫЛА ПОРОЛЬ НУ ТЫ МЕНЯ СПАС СПОСИБО
whats about polation its burned:-)
ariz
lo quemó al display el dejo una mañcha jejejen
Sube tu video carnal y enseñales como se hace jeje!
Una bestia sinceramente amigo, no se si eres colega pero esto es un desastre de video.
Eso se llama mal trabajo creo que ya sabe porque?
Only glass replacement within the worst method as can I saw... but if this work it's ok :) Unfortunately not for me and my quality knowledge and skills...
these samsung stickers are quite nutritious.
A5 2015
Pls help me Sam phone display crach so no money pls help me bro
Tem o frontal do a510m
No it is not a5 2016
ok boss
POR TE GUSTA JUGAR CON LAS LCDS
amigos quiero que me ayudennnnn help please , instale un rom stop personalizada , y quiero volver a mi firmware original y me sale fail en odin , en z3x , no allo que hacer , me meti con twcp y cambie el filesystem y de verdad no se en que formato va la memoria cache , la data , y el sistema , yo lo configure a f2fs pero nada quien me ayuda por favor , mi tlf es un j7 prime de la variante SM-G610M
Amigo primero no es Rom stop, es Rom Stock, y si es personalizada no es Stock "O sería official" ese error te lo da por diferentes razones, la mas común no coincide con tu modelo, la peor es que intentas colocar una Stock con diferente Binario, recomiendo descargues Firmware correspondiente a tu modelo y para saber el Bin Inicia en recovery mode, salu2
unsuccessful a huge mistake
a5 2015!!!
Diferent is a5 2015
i went here just to see where the screen ribbin was, so i could replace my home button
A5-2015
Hi