WOW. I've been using a different software where I have to map over letters individually. I've always seen and read about the BX zips, but it never tried it because I didn't have embrilliance. Something hit me today and I did a bit of research... my life has changed. Thank you!!
Thank you great tutorial, a newbie question coming up, grateful for any reply, I have a Halo 100 (Tajima) ... if I download BX Fonts can it be saved in DST in Embrillance? Thanks in advance.
I have the Ricoma EM1010 (uses DST) and embrilliance software. I download my designs and fonts off of Designs by Juju website. What format for the fonts do I need to download?
Remember that the files might need to be unzipped (extracted) in order to be able to move them into embrilliance. Also, make sure you have the folder opened to the point where is says under the type column that it's an " embroidery installer file" If you are getting stuck with the process its possible you didn't do these steps.
I have followed you every step and I cannot get my coffee and paste to work like that. I cannot get mine copied and paste so I can use them even trying to drag that won’t work.
I hope that you were able to watch today's video because it MAY help. It is the one on doing a knockdown stitch and using the snowman feature. In the video, I show again how to install fonts.
I just installed a lot of fonts, but when I open the font selection menu on Embrilliance, they aren't all showing up, although I did get the message that they had been installed.
When I try to download to my Embrilliance program, I get a red circle with a line through it. I cannot get my BX fonts to install at all. I have tried it over and over
@@lindanorman9144 I have the same problem and I found out all I had to do was double click on what I wanted to go into the BX file fonts and it worked perfectly. I could not copy it and paste it wouldn’t work and I couldn’t drag it I tried over and over again was getting very frustrated. Until I just double clicked on what I wanted to get moved into the BX and it went right over I hope this helps.
I’ve done this a million times without a problem till today. I am doing the same action and it won’t transfer. And yes, it’s a BX font. I’m losing my mind and I have a project to do. 😭
@@PattyAnnesPlace Well, they told me that they changed something in Embrilliance and I have to just double click on each one to transfer it. But what happens now is that I click on one and I have to go to Embrilliance, then come back out and start clicking and only then I see the pop up that says it’s been downloaded.
![“อ.เบียร์ คนตื่นธรรม” มาตามคำเรียกร้อง แหกศาสตร์ฮวงจุ้ย เตือนสติอย่างมงาย | แฉ 7 พ.ย. 67 [1/3]](http://i.ytimg.com/vi/5fc4S3xBNfc/mqdefault.jpg)
WOW. I've been using a different software where I have to map over letters individually. I've always seen and read about the BX zips, but it never tried it because I didn't have embrilliance. Something hit me today and I did a bit of research... my life has changed. Thank you!!
THE SAME THING HAPPENED TO ME…hours ago today 😂❤. We are both saving a lot of time with this!
Thank Patty 😊
I've been struggling 😔
Your explanation is clear ❤
Thank you, your tutorials are so easy to follow!!!
You are so welcome!
Thanks for keeping it simple!
You bet! Thank you for your comment!
Perfect video! I was able to follow along great!
Thanks, I have bx fonts in Embrilliance 👍 your videos are fantastic 😊
Awesome! Thank you!
Perfect timing for me! I just downloaded some font and was wondering how to do this. Thank you!
Fabulous, Dori. Did all go well?
Hello PattyAnne, I would like to know if I download a file in bx, it works for my machine that works with pes format.
Thank you great tutorial, a newbie question coming up, grateful for any reply, I have a Halo 100 (Tajima) ... if I download BX Fonts can it be saved in DST in Embrillance? Thanks in advance.
Yes you can!
I have the Ricoma EM1010 (uses DST) and embrilliance software. I download my designs and fonts off of Designs by Juju website. What format for the fonts do I need to download?
How do you adjust the size of your font? I have the black boxes around the entire text, but it doesn't allow me to minimize or maximize the font.
Can you open a file with .ESA format? in Embrilliance
Thanks PattyAnne 😆
I downloaded PES fonts... and Embrilliance will not save my work, do the fonts need to be BX and Embrilliance will save as a pes file?
Hi Patty!! Where do you buy your native BX fonts? BX fonts I have downloaded in the past have ended up not being scalable :/
th-cam.com/video/PO9anXfiLvs/w-d-xo.html
How do you do this when you download fonts from Creative Fabrica?
The technique should be the same regardless of where you buy the fonts. Just make sure that you unzip the BX fonts first.
Thanks, this worked great!!
Glad it helped!
Thank you!!!!😊
Does it work on the free version? Because when I do it, it says installed but I don't see it anywhere!! Im getting frustrated :(
It is supposed to work there!!! th-cam.com/video/PO9anXfiLvs/w-d-xo.html
Very helpful, thank you :)
Glad it was helpful!
Remember that the files might need to be unzipped (extracted) in order to be able to move them into embrilliance. Also, make sure you have the folder opened to the point where is says under the type column that it's an " embroidery installer file" If you are getting stuck with the process its possible you didn't do these steps.
How do I remove a BX font from my list if I no longer want it?
Thank you so much
What is the difference between BX Fonts and any other fonts we can download?
BX fonts are linked up to your keyboard so when you type the letter a you get the A
I have followed you every step and I cannot get my coffee and paste to work like that. I cannot get mine copied and paste so I can use them even trying to drag that won’t work.
I hope that you were able to watch today's video because it MAY help. It is the one on doing a knockdown stitch and using the snowman feature. In the video, I show again how to install fonts.
Awesome, thanks for sharing it ❤️
Good video thanks
Woot! Jessie, you are always welcome and appreciated.
I just installed a lot of fonts, but when I open the font selection menu on Embrilliance, they aren't all showing up, although I did get the message that they had been installed.
Restart Embrilliance because the software "see" the fonts while starting
Having this same issue, have tried restarting the Embrilliance software and still not seeing them.
@@emileehughes8499 I get three of them -= need the smaller ones - why doesn't this work?????
th-cam.com/video/PO9anXfiLvs/w-d-xo.html
th-cam.com/video/PO9anXfiLvs/w-d-xo.html
When I try to download to my Embrilliance program, I get a red circle with a line through it. I cannot get my BX fonts to install at all. I have tried it over and over
Did you remember to extract first?
th-cam.com/video/PO9anXfiLvs/w-d-xo.html
i cant drag or copy and paste....
I have just tried this and it's not working for me :(
Uh oh... what happened?
@@PattyAnnesPlace doesn't not work for me - tried a dozen times................why isn't this working???
th-cam.com/video/PO9anXfiLvs/w-d-xo.html
th-cam.com/video/PO9anXfiLvs/w-d-xo.html
@@lindanorman9144 I have the same problem and I found out all I had to do was double click on what I wanted to go into the BX file fonts and it worked perfectly. I could not copy it and paste it wouldn’t work and I couldn’t drag it I tried over and over again was getting very frustrated. Until I just double clicked on what I wanted to get moved into the BX and it went right over I hope this helps.
I’ve done this a million times without a problem till today. I am doing the same action and it won’t transfer. And yes, it’s a BX font. I’m losing my mind and I have a project to do. 😭
Oh nooooo did you get it fixed?
@@PattyAnnesPlace Well, they told me that they changed something in Embrilliance and I have to just double click on each one to transfer it. But what happens now is that I click on one and I have to go to Embrilliance, then come back out and start clicking and only then I see the pop up that says it’s been downloaded.