BTT - Manta E3EZ - CB1 install
ฝัง
- เผยแพร่เมื่อ 26 ก.ย. 2024
- This is a simple tutorial on how to install the BigTreeTech Manta E3EZ v1.0 with CB1 (Compute Board 1) on Manta E3EZ with Klipper and OS image.
Playlist for BTT Manta E3EZ
• BTT Manta E3EZ
One Time Tips, You Can PayPal Me:
www.paypal.me/...
Patreon:
/ edbraiman
buymeacoffee:
www.buymeacoff...
Discord Chat:
/ discord
Hardware:
1 - BigTreeTech Manta E3EZ V1.0
1 - BigTreeTech CB1 V2.2
1 - USB-A to Micro USB Cable
1 - BigTreeTech CB1 Heatsink
1 - PSU
Software:
TeraTerm
Filezilla
Raspberry Pi Imager
NotePad++
Links --
BTT Manta E3EZ v1.0 :
M4P:
github.com/big...
CB1:
github.com/big...
Raspberry Pi Imager:
www.raspberryp...
TeraTerm
osdn.net/proje...
NotePad++:
notepad-plus-p...
Klipper:
www.klipper3d....
Password Change:
www.cyberciti....
firmware.bin:
/ edbraiman
My E3EZ and CB1 have just arrived. I was starting to think I was in over my head but watching this has made things seem much easier, thank you!!!
You are welcome.
This was a wonderful tutorial, it helped me out greatly! If you had one with the EBB42 next, I would be eternally grateful. I'm working on that now and boy am I lost.
Quick note - su is "switch user", the command you're looking for is "sudo passwd". You can remember the sudo command by thinking "super user do" which is to tell the computer to do this command as the super user. You probably have already found/seen that, but in case anyone else was wondering, here it is.
I'm in process of working out tutorial. My be sometime.
man i shoulda waited for something like this to come out.
YOU ARE AWESOME THANK YOU! YOU EARNED YOURSELF A SUB
Thank you.
Hey there I am hi_no_see, I want ask a question. Does octopus work without raspberry pi 1‐5?
Would it be better if you rehearsed this before recording? Also, maybe edit out your mistakes as well...
You did a great job. However, this convinced me that it just isn't worth the trouble. Maybe BTT will start including two thermistors with the board so people can install it! lol
Thanks. Normally I show bench setups, but most install directly. The point for this tutorial is to show OS setup. More tutorials will examine aspects of other components. There's four up on Patreon for this board that I'll release soon.
If you don't have 2 thermistors why on earth would you want a printer mainboard?
@@simonburke6681 Why on earth would you make a comment when you didn't watch the whole video?
@Baxrok2 i watched bud, I have it working because I have a printer and funny enough it had 2 thermistors, lol
thanks for the video this was the best tutorial i could find
You're welcome.
i finally finished my printers board installation and i got everything set up and running@@EdwardBraiman
Wouldn't it be easier to just delete the missing include file and paste the printer configuration inside the printer.cfg file instead?
I don't see the benefit of doing it as a separate file like that when it is just running one printer.
Not a bad tutorial overall. A couple of things that could have been done more simply, but over all not too bad
Thanks Ed your always way out ahead of us!
You're Welcome
Thank you for this installation Video, great work, very clear and concise. I am struggling with installing the 4 screws to secure both the heatsink and CB1 module. There seems to be a film over the screw holes on the Manta board, below the CB1 board. Do I need to peel something off? I have not seen these types of hole covers before. I do not want o peel something that is not intended to be peeled. plz advise.
It's okay to remove kapton tape.
@@EdwardBraiman Thank you, Ed. I was able to get past the tape. I did find the included M2x10mm screws were very much incorrectly sized. Do you happen to know the actual size of the 4 brass insert threads for the CB1/CB4 mounting holes?
Muito bom amigo! Seus videos são muito útil!
De nada
great video..im following along and got to the part where u said u have a link for the firmware on your patreon page...i went there and cant find it..could you tell me how to get to it..thank you
nevermind..i found it
I have a cb1 with 16gb eMMC, how do you install klipper onto the emmc instead of sdcard? What image do you use?
I'll be releasing video in a couple, but have only gotten 8gb emmc to work. 16gb seems to partition when imaged. Granted I think I was experimenting with OctoPrint, but it was a month ago.
Basically 16gb didn't work.
Emmc load for 8gb should be visible now
First peeks are normally on Patreon.
@@EdwardBraiman I’ll pop over to your patreon page, thank you 👍
if I pair with this with the hdmi 7 display by bigtreetech, what connector do I use to connect the two together?
I'll need to look it up.
I have the tft35spi bundle without the IO2CAN v1.0 how do I activate the screen to work?
Currently with Klipper TFT is not possible at the moment, but maybe something changed.
Hello Ed, please help me. How can I reset the Manta E3 EZ with CB1 and Klipper? Thanks
What seems to be the issue? Also there's a discord chat link in description.
@@EdwardBraiman I set up the Manta E3 EZ and CB1, but the setup doesn't start when I remove the SD card. It starts when I insert the SD card. How can I make it start without the setup SD card?
@gemici6701 depends on the version of CB1 there's a version with eMMc(on board memory) and one without. Depends on which you have.
@@EdwardBraiman I use CB1 eMMc
@@gemici6701 there's a video on CB2 I made with a command you can try in shell prompt. I've not attempted on CB 1.
Hi Ed,
I am facing some issues with wires. When I have E3EZ powerd by micro usb (Vbus jumper on) CB1 and klipper starts. Once I try to power it up from 24v PSU by DC_IN port CB1 does not start at all ACT light remains dark 3v3 is getting lited. Could you release a video showing how exactly are you wiering all necessary stuff in order to make CB1 start from
Yup. Depends on weather (heat) to record this weekend.
Will this work on a CR10-S Pro V2?
Bro!! Thanks for the quick response! ok will look for a nice touch screen for it. Right now bro im getting this:
mcu 'mcu': Unable to connect
Once the underlying issue is corrected, use the
"FIRMWARE_RESTART" command to reset the firmware, reload the
config, and restart the host software.
Error configuring printer
[mcu]
# serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
serial: /dev/serial/by-id/usb-STMicroelectronics_MARLIN_STM32G0B1VE_CDC_in_FS_Mode_208D316D574B-if00
Usually means you're not pointed at serial connection in printer.cfg with MCU label.
Hello Ed - thank you for the great guide. But i do have an question, i followed all steps as you did, but when i need to check for the serial identification it doesnt find it... i get errors all time, no matter what to do. It seems the Manta doesn´t speak to the CB1, Even though i´ve repeated all steps and followed the manual three times...
There's a Discord link in description and either myself or someone else can help you in Klipper chat.