Make a Riving knife
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- You should be careful! !!
The making of this knife is incorrect.
This knife is about 1.5mm thinner than the blade actually used to materialize the inside of the blade, which may result in kickback. Don't use this as a reference! !!
Notice to be aware of
The width of the blade cut and the width of the split knife must be the same.
It is always rewarding and educational to watch the master at work !!
Hello friend Steve.
Thank you for coming.
Making things without spending money is so much fun! ! I am very happy that you agree. Tachi.
Thanks again :) Needed this one too! You are still on my Top Ten TH-camrs list. Style, elegance and great knowledge of good craftmanship.
Hi Fredrik
Thank you for always supporting my video
That's the very happy news from you! !
I must continue to make sure that I stay on your list.
Thank you for your kind comment
A masterful job by one who is an inspiration to all subscribers.
Hello scotty
Thank you for watching my video
And thank you nice comment
I enjoyed making things again and I learned a lot.
Thank you
Muy buen trabajo amigo, me has dado una gran idea, lo voy a hacer y lo subiré a mi canal, te haré referencia, mi sierra es de otra marca, pero lo haré.
Muchas gracias amigo, un saludo y gracias por compartir este precioso video 👍😀👍
Hola serendipia
Gracias por disfrutar siempre mi video.
Y gracias por sus amables comentarios.
Estoy deseando que llegue el video. Gracias
Saludos desde japón
Sinceramente
Well done mate👍🏽
Exactly the same width of your blade, of course. 😉👌🏽
It is one of the best uses for old saw blades, that and marking knives. 👌🏽
Hello Bill
Thank you for watching my video
And thanks for the comments that encourage me
This experience is huge for me.
I want to try making a simple knife someday!
Thank you
See you
I’m a little late to the party but thanks so much for your video. I have been looking for a thin kerf knife for my Delta and they don’t exist. I do like the wooden shim idea built into a zero clearance but still wanted something metal. I never would have thought to make one out of an existing thin kerf blade without your video. Thanks from Ontario Canada, will be grinding it out tomorrow.
Hello Jay
Thank you for agreeing to my video.
And thank you for your sincere and wonderful greetings.
The knife I made in this video is just the size of a circular saw with a diameter of 216m. The thickness of the 255m circular saw does not match.
You make a great knife. Tachi
Great work on an essential safety item for your saw
Hi John
Thank you for always supporting my video
Thank you for your kind comment
Sincerely
Да, крепкий расклинивающий нож получился!
Привет,
Спасибо за ваши хорошие комментарии
У меня был дополнительный опыт, впечатления, заниматься железом все сложно!
Далее мы будем бороться с алюминием.
Спасибо
Damn good idea by using the old blade to make the riving knife.
Hello Trail
Thank you for coming to my workshop
And thank you for your good comments.
From Japan
I always like watching you work. Thank you. Thumbs UP.
Hello Hendrik
Thank you for always enjoying my video
And thanks for the wonderful comments.
Greetings from Japan to Hendrik
Thank you
See you
You have such great ideas! Really enjoy your channel and learning from you. Thank you.
Hi Robert
Thank you for watching my video
And thanks for the wonderful comment
My videos are always challenges and not perfect, they are my own experience and learning.
Thank you
See you again
C'est toujours un réel plaisir de vous regarder. Vos vidéos sont très bien filmées, au plus près du travail et n'ont pas besoin de discours. A voir les commentaires des internautes qui vous suivent, je ne suis pas seul à aimer. Prenez soin de vous et de vos proches. A bientôt
Salut mec
Merci de toujours soutenir ma vidéo
Et l'excitation de commentaires gentils et gentils!
Merci à mes amis
Нужная и полезная вещь ) 👍👌.
Привет александр
Спасибо, что всегда смотрите мое видео
И спасибо, хороший комментарий
Good idea, congratulations!
Hello Mario
Thank you for always watching my video
Recently, I've been especially careful about safety.
Thank you for your comment.
An excellent way to recycle an old blade and another surprising job. Go on and stay safe, friend!
Hello Giuseppe
Thank you for always supporting my video
I really enjoy making things.
Thank you for your kind comment
Sincerely to my friend
Very nicely done
Hello U
Thank you for always watching my video
And thank you nice comment
Sincerely
Brilliant execution .Always a joy watching you work. Never a rush and very detailed work.
Hello Henry
Thank you for watching my video
And thank you for the wonderful comment
Only learning from mistakes! I need effort
Thank you
See you
Отличная работа!👏
Привет сергей
Спасибо за постоянную поддержку моего видео
Я воодушевлен вами, мое сердечное спасибо моему другу
5:41 ohyo speaks! Okay okay :D
Beautiful build as always!
Hello, Scott
Thank you for always watching my video
And thank you for your kind comment
This knife is thin and cannot be used with regular blades!
I will replace it now with a thin blade.
Thank you from Japan
Отличный нож расклинивающий для циркулярной пилы 👍.
Привет Николай
Спасибо, что всегда смотрите мое видео
И спасибо за замечательный комментарий
Спасибо
Увидимся
Very good work and very well shown - excellent video. Thank you!
Hello Mark
Thank you for visiting my video
And thank you for your praise
I learned a lot this time as well.
Me gusto como quedo la piesa y me dio varias ideas que se pueden haser con las hojas de serrucho y una pregunta para que se usa en el serrucho esa piesa cual es el fin muy buen trabajo felicidades por compartir estoy inscrito en su canal veo todos sus videos
Hola jorge
Gracias por disfrutar siempre mi video.
Y gracias bonito comentario
Esta vez también, aprendí mucho.
Gracias
Servus ....wieder einmal eine super Idee 👍es ist immer wieder schön wie ruhig und genau du arbeitest 👍.
Wünsche dir alles Gute und bleibe gesund 🍺Reini der Brauer aus Bayern 🌲🌲🌲
Hallo Reini
Vielen Dank, dass Sie mein Video immer genießen
Und vielen Dank für Ihre freundlichen Kommentare
Von Japan nach Reini in Deutschland
Mit freundlichen Grüßen Tachi
NICE! Mane sasete itadakimasu. Anzen ichiban and cleaner cuts too. Thank you very much!
Hi Maui
Thank you for watching my video
And thanks for the nice comment
I noticed it after uploading the video!
The width of the blade cut and the width of the split knife must be the
I need to improve this.
Thank you
Master , brilliant, stay healthy
Hello Klaus
Thank you for always watching my video
And thank you for your kind comments
Thank you from Japan
See you
thanks for video!!! GOOD JOB!!!
Hello jiří
Thank you for always enjoying my video
And thank you nice comment
I enjoyed making things again and I learned a lot.
Thank you
おはようございます😅
相変わらず、テーブルソーを、チューニングしてますね✨
今回は、割り刃の制作。
素晴らしい、アイデアですわ😁
私は、相変わらず、何もしてなく、今は、家庭菜園が、メインに、なっています。
コロナの影響は、大丈夫ですか？
会社は、影響❓は、出てきました。
外出しないから、事故も少なく、毎日、暇です。休みたいけど。
また、アップを、楽しみにしてます👍
助さんこんにちは
頻繁にアイコンと名前を変えると何方か戸惑います！！
こちらはコロナの影響をポジティブに考えて仕事を減らして午前と午後にうまく振り分けてリラックスした仕事をしています。
次回はまた木工に戻ります、よろしくお願いします。
@@TachiOhyo56 さんへ
すみません🙇
とある方にばれてしまい、時々、名前を、変えいます🙇
さて、今日は、昨日と同じぐらい、気温が上昇して、昨日は30度、今日も、28度と、茹だる暑さです✨
湿度は低く、虫干しには、最適かも。屋外の仕事は、休み休みで、水分補給しながら、作業しています😅
会社自体も暇で、明日は、休みます😃。火曜日も、暇で、恐らく、一日中、スマホと、戯れてますわ😭
Perfect. Thank you, as always. Keep safe. 🙏🏻👏🏼
Hi Mandy
Thank you for watching my video
And thanks for the nice comment＾＾
これはナイス再利用ですね！
何か捨てられなくて置いてあるやつあるのですが、いつかチャレンジしてみたいです！
Sankumaさんこんばんは
私のチャンネルを覗いてくれて有り難うございます、
この再利用の加工はかなりうまくいきました、しかし・・・！
刃の部分とこの加工部分の厚さの違いを見逃していました！
このビデオで作ったrivinigナイフはもう少し薄い刃の時に使い分けることにします。
Very great job ! 👍 👌
Hi Leos
Thank you for always watching
And thanks for the wonderful comment
My big experience!
Excellent, as always. Beautifully filmed. All that drilling & grinding and such control. Just one correction: "Riving knife" (Splitter located behind table saw blade keeping wood with internal pressure from pinching back onto path of back of table saw, causing binding & kick-back!)
Hello Ralph
Thank you for always watching
And thank you nice comment
This work is also a challenge and a great experience for me.
The safest way I can.
Thank you
sangat bagus dengan idenya
Halo Ardieputra
Terima kasih karena selalu menikmati video saya
Dan terima kasih komentar yang bagus
Hormat kami
Parabéns, o cutelo ficou perfeito, mas o que mais me chama atenção é a sutileza com que você manuseia a esmerilhadeira.
Olá Ubiratan
Obrigado por sempre assistir meu vídeo
E obrigado, bom comentário
Meu triturador estava perigoso e falhou?
Devemos procurar uma segurança perfeita.
Obrigado
Buongiorno Tachi so contento che hai rimesso la giusta musica di sottofondo, alcuni giorni fa ti sei definito vecchio ignorante, tu tutto sei tranne che ignorante non ignori nulla, nulla lasci al caso e al disordine, sei scrupoloso e preciso sia sul legno che sul ferro spettacolare un Maestro di umiltà e di precisione millimetrica.
p.s. Molto bello orologio che porti complimenti :)
Che peccato che per me sei così lontano un saluto affettuoso :)
Ciao Ermanno
Grazie per aver sempre guardato
E grazie per l'ottimo commento
Impressione, maneggiare il ferro è tutto difficile!
Questo lavoro è anche una sfida e una grande esperienza per me.
Grazie
@@TachiOhyo56 caro Tachi, vederti lavorare sembra come se fosse il tuo pane, e parlo del ferro dove io sono una Pippa, premesso che mi sono imposto di comprare una saldatrice e prima o poi ci proverò e detto tra me e te questo attrezzo mi fa paura, ma bisogna anche superare le proprie paure e per ora l ho comprata :)
Fare un commento positivo al tuo lavoro é molto facile sei bravo :) mi piacerebbe tanto essere un tuo allievo o anche un aiutante fuori campo, guardarti dal vivo deve essere qualcosa di una bellezza difficile anche da scrivere.
Con affetto e tanta simpatia mi sento di dirti che ti reputo un buon Amico lontano :)
Excelente trabajo amigo,saludos
Hola vicente
Gracias por apoyar siempre mi video.
Gracias por tu amable comentario
@@TachiOhyo56 gracias a tí por tu atención al canal,quiénes te seguimos disfrutamos con tus proyectos 👍
revelation! add another pdf file. with a knife drawing. Good job Mate👍👍👍
Hello, MrWojpen
Thank you for always watching
And thanks for the good comment
Impression, handling iron is all difficult!
Thank you
trying to add one to my table saw blade. not sure it is designed to accept one on its base and the shape it should have. i wish i could see exactly the area where you attached your riving knife on your blade maybe to get better idea. thanks for your great videos ofcourse
Hello Sameh
Thank you for watching my video
And thanks for the nice comment
This split knife is for my table saw DeWalt only and can't be attached to anything else, maybe! I copied it faithfully.
This experience is huge for me.
Thank you
See you
@@TachiOhyo56 and you have done a great job
Very professional finish. Good use of waste steel. What happened to the original? Thanks for sharing
Hi David
Thank you for always watching my video
And thanks for the wonderful comment
The original knife was also processed into a crescent shape.
Bonjour Ami, encore une excellente idée et une très belle réalisation très intelligente. C'est toujours un plaisir
de regarder vos vidéo....Amitiés de la France, à vous et votre beau pays...Norbert.
Hello Norbert
Thank you so much for supporting my video
And I am deeply impressed by the nice comments.
Thank you to my friend Norbert from France from Japan
Thank you
See you
@@TachiOhyo56 Merci beaucoup pour ton message. C'est vrai que j'ai une profonde admiration pour les japonais et le Japon. Peuple fier des ses traditions et pourtant si moderne et si beau. Encore merci Ami nippon.
Amazing work, my friend! Really nicely done!!! 😃
Stay safe there with your family! 🖖😊
Hello MC's
Thank you for always watching my video
And thank you for your kind comments
I'm fine＾＾
See you again
excelente tutorial ,linda la forma como corta en curva ¿la idea sería que quede a la altura de los dientes de la sierra circular y no más arriba?
Hola tionolo
Gracias por ver mi vídeo
Y gracias por el maravilloso comentario.
Lo ideal sería hacer coincidir el grosor y el diámetro de la cuchilla.
Gracias
Nos vemos
une bonne sécurité lors de la coupe c'est essentiel 👏👏👏
Bonjour dbbois
Merci d'avoir regardé ma vidéo
Et toujours merci pour ton commentaire
very artful
Hello vincent
Thank you for watching my video
And thank you for your wonderful comments
This knife is for 2mm blades.
Thank you
See you
Hola maestro como esta, espero que bien al igual que la familia, me ha gustado mucho el trabajo que ha realizado yo no me hubiese atrevido, pero viendo con la destreza que usted lo a hecho creo que ya soy capaz, muchas gracias y un saludo.
Hola jose
Gracias por mirar siempre mi video.
Y gracias por tu comentario
Lo siento, esta vez es un video aburrido para ti.
Volveré en el video de carpintería la próxima semana, un placer conocerte
Gracias
Nos vemos
@@TachiOhyo56 no amigo mío ,no es aburrido lo que ocurre es que con este video soy realista con mis posibilidades y veo que este nivel está muy alto para mi,pero aún así sigo disfrutando con sus vídeos, muchas gracias y un saludo
Nice work on your riving knife. I don't think I have a guts to do that. I have a angle grinder but I rarely used it, I'm afraid with that tool😊
Hi Don
Thank you for always watching my video
And thank you nice comment
One thing to worry about is that my angle grinder doesn't have an auxiliary handle, it will work if you cut gently and gradually.
But I'm always self-taught. ‥
Thank you
割り刃だったのね。凄くいい
こんばんはcopanさん
いつも有り難うございます。
割れ刃も一度作って見たい道具の一つでした。
本来同じサイズのノコ刃で作ると薄い仕上がりになることが判明しました。
チップの部分は2.8mmでもそれ以外の厚さは1.8mmです！！
理想はゼロクリアランスインサートボードをスレスレにクリアーの2.5~2.8mmの金属板を探します。
有り難うございました。
Amazing craftsmanship and dedication to safety. Where did you get the template? Thank you for sharing!
You could lay one on a scanner and print a 1:1 copy
@@draztiqmeshaz6226 Thank you!
@Rich Ragan
Hello, Rich
Thank you for always watching
And thank you nice comment
This work is also a challenge and a great experience for me.
Thank you
Another great video, my friend! Did you do anything to retemper the knife? I'm not sure if that would even be called for, but I'm curious.
Hi Nik
Thank you for watching my video
I should have done what you said, should temper it to make drilling holes easier! I learned a lot this time as well.
Thank you
See you
Very well done. That's a great idea. If may though, please be careful when drilling metal. I've seen swarf take a mans finger off.
Hello Peter
Thank you for always watching my video
And thanks for the advice comment
Recently, I try to put safety first, but there is still a shortage.
We must aim for perfect safety.
Thank you
Sincerely.
Muito bom . Excelente aproveitamento.
Olá Alexandre
Obrigado por sempre apoiar meu vídeo
Eu realmente gosto de fazer coisas.
Obrigado pelo seu amável comentário
Отличная работа👍 Безопасность на первом месте! С уважением, Андрей
Привет Андрей
Большое спасибо за поддержку моего видео
И спасибо за замечательный комментарий.
В последнее время я очень внимательно относился к безопасности, я знаю, что она все еще не идеальна,
Спасибо
Увидимся
Riving Knife should not be in line with saw blade though
+- 0.3 mm to the right slightly outside the saw blade. PS it is best to make a Riving Knife from spring material BV. aluminium. And the wood remains pressed against the guide and the rest of the wood remains clamped in place against the guide and cannot shoot away, no kickback saw wood (I've had it like this for years) win win situation !
Hello Judith.
Thank you for giving me your wonderful information.
Tachi
Isn't the centre of the blade thinner than the teeth? Therefore not so effective at preventing pinching at rear of blade? 🤔
Hello thesey
Well, that's your point.
I noticed it after uploading the video!
I need to improve this.
Thank you
A "Riving knife" should be as thick as the Kerf of the blade in use. Here, the the material cut from a saw blade will always be thinner than the cutting width of the Circular Saw Blade it was cut from.
Hi Navin
Thank you for watching my video
And thanks for the nice comment
Exactly as you pointed out! I found out later and was shocked by! ! This is my big learning.
Thank you
Actually the riving knife should be slightly thinner than the kerf and thicker than the plate.
Precisa para la sierra, quisiera ver como la usa. Gracias por su agradable vídeo.
Hola mamcora
gracias por tus comentarios
Para ser honesto, esta espada es un fracaso! ¡Es más delgado de lo que esperaba!
¡Esto no puede ser usado, descalificado! !
Califique solo el proceso de hacer que esto funcione, lo siento.
Gracias por la amable mamcora de Japón
Ohyo56 ok. Pero de los errores se aprende mas y seguro usted hará algo mejor y que si pueda usarse. De todas maneras es muy fascinante su forma de elaborar las cosas. Un abrazo.
Mr ohyo I love tour videos
Hello Felixovich
Thank you for always supporting my video
And thank you for enjoying the video
I also really enjoy making things.
Thank you
Nice! 👏👏👏
Hello Maurício
Thank you for always watching
And thank you nice comment
Excelente, por reciclar y darle uso, como siempre trabajas ordenado, y la musica de fondo de que tema es porque es linda,abrazo.
Hola norberto
Gracias por ver mi vídeo
Y gracias por el lindo comentario
Tus comentarios son mi aliento.
Gracias
Muito bom, mestre!
Hello Hot DJ
Thank you for watching my video
And thank you for your support
素晴らしい
どうも有難うございます。
心を込めて。
Sehr gut 👍
🌟🌟🌟🌟🌟
Hallo Rui
Danke, dass du mein Video gesehen hast
Und danke netter Kommentar
Auch diesmal wurde viel gelernt.
What’s that black thing hanging down from your angle grinder😀
Hello Jeffrey
Thank you for watching my video.
It's probably the power cable...
Will I be able to do this with jig saw? I have never cut metal
Hello Test T
Thank you for coming to my workshop
Cutting with a jigsaw is difficult, the material blade is steel so it takes too long to cut.
Thank you
Nice work! How do you protect your camera from sparks? :)
Hello, craftsman
Thank you for always watching
And thank you nice comment
Neither the dust of woodwork nor the sparks of steel are very good for the camera, the sparks were covered only with a protective lens and then blown off with air!
This work is also a challenge and a great experience for me.
Thank you
Good idea using old saw blade. Great job making it. Wonder where I can get a drawing template like you had for my old Craftsman 113.298030 saw ??
Hello glen
Thank you for always watching my video
And thank you for the nice comment
The template was copied 1: 1 using a copier.
Thank you from Japan
a little bit of metalwork and the purchase of sparklers is unnecessary :-) Greetings, Michael
Hello Mikel
Thank you for always watching
And thanks for the wonderful comment
Sparkler is a summer feature!
Safety first is my heart
And my big challenge making!
Bonjour,
Très belle réalisation d'un couteau diviseur (pour votre sécurité)
@+
pierre
Salut Pierre
Merci de toujours soutenir ma vidéo
La copie de ce couteau fendu a fonctionné, mais la seule plainte que j'ai est un peu mince.
Je vous remercie
Its a good and entretaining video but please make sure to use a riving knife or splitter thicker than the blade plate (im gonna guess this is thinner since you use another blade plate and sanded it to make it and never mentioned that the knife must be thicker than the blade plate youll be using as blade) and thinner that the kerf or it wont be as usefull and can be deceivingly dangerous since you'll think you are using a safety measure. Like wearing a non working seat belt.
For that reason i cannot like this video or it will trick more people into thinking that this is a good idea.
You could use for example a full kerf blade plate to make a thin kerf blade riving knife or a glue line blade for a full kerf one but never the same plate thickness of the saw youll be using.
Hello Cristófano
Thank you for coming to my workshop
Yes, I agree with you.
I will quickly unpublish this video.
By the way, I use a blade of the same thickness as this duplicated knife because I have a deep understanding of the meaning of your opinion.
Thank you
@@TachiOhyo56 dont take it down. You can simply put a written note on it and it will be very good
@@VaracolacidVesci
Kind advice, thank you for your comment
Eu fiquei impressionado como o senhor trabalha tão bem em qualquer material. Meus cumprimentos. Pode me dizer quem é o compositor ( autor) da segunda música dos seus vídeos??
Obrigado por mais este vídeo!!!
Oi Niuto
Sempre lhe agradeço
BGM 「TH-cam AudioLibrary」
Avocado Street .Sugar Pines by Wes Hutchinson
Obrigado
Great video.
If the template is you had on paper is from Dewalt Table saw; Pls. can i get the template or the exact dimensions (as i couldn't get any reference on the internet, to make riving knife for my Dewalt DW745.
Hello Akin
Thank you for coming to my workshop
And thank you for your polite and nice comments
There is no template for this project
I removed the black knife from the machine, copied it with a copier, and then created the template in the desired shape.
The finished knife is thinner than you can imagine, not suitable for the default blade!
Gratitude and peace from Japan
@@TachiOhyo56 thanks for prompt response.
i understand there's no template but can you send me the dimensions of the black knife you removed from the machine?
can you please measure the black knife you removed from machine and write the measurement on the photocopied or scanned black knife, so i can use that to make my own template?
@@akinola24
Hello again Akin
I can't do the elaborate work related to old man PC!
We can fulfill your request! sorry
Ingenious
Hello Gideon
Thank you for always watching
And thanks for the wonderful comment
Good job (mr) Ohyo . how to make a table saw cabinet from motor and arbor ?
Hello nourddine
Thank you for always watching my video
And thank you for your comment
I'm sorry, "how to make a table saw cabinet from motor and arbor?" I don't understand its meaning,
I would like to request another expression again.
Thank you
See you
Make this table saw from wood th-cam.com/video/Zxmr2Qc7ilk/w-d-xo.html
おはようございます！かつてOhyo56 さんの動画ではカーバンパーやコーヒーの蓋などを利用した作品が登場して驚かされましたので、捨てるのはもったいないと思う物は進んで利用されるリサイクル精神旺盛なアーチストだとは存じ上げていました☺…が、ブレードを加工して割り刃をとは正直驚かされましたね。😳自分もかつて動画を参考に、それまで無かった割り刃を製作しては装着していますが、こうして不要な物から立派な物が出来ちゃう訳ですから安易に捨てる事はますます出来なくなりそうです。😝実に楽しいなー！自分はせいぜいゼリーのカップを塗料の容器に流用したりアイスキャンディーの棒でボンドを塗ったり位でしたが、もっと見方を変えれば捨てるものなど無いのかも？「いい加減にしなさい！」👩と、かみさんに叱られそう。😱今週も楽しい動画をありがとうございました。
こんばんは。
今回は装着部分を忠実にコピーしました・・・・しかし凡ミスはチップソーのチップの部分が計算違いで出来上がりはかなり薄いものでした！！実際１mm程度薄い割ればの出来上がり、ないよりましの代物（ここ誰の話・・・）ま、気づいてる人も多いですけど！これに基づき次に作るときは完璧を目指しますよ。いつかはナイフやマーキングナイフにもチャレンジしたいです。
追伸、私は極めて健康・・・・有り難うございました＾＾
Very good, where did you get the template for the knife?
Hello George
Thank you for coming to my workshop
And thank you for your comment
Copy your machine's knife 1: 1 with a copier
Thank you
See you
@@TachiOhyo56 Thanks for the reply, unfortunately I've inherited a saw with no riving knife to copy. I've contacted the manufacturer, Draper, and they can't even supply it so unless I can, by chance get it right, I've no idea what to do.
@@georgemills3006
Of course, there are various shapes of fixed parts depending on the model,
You are advised to make a prototype for your machine with a thin veneer. Use it as a template to proceed with your work.
@@TachiOhyo56 Thanks very much, it was the next thing I was going to do, just hoped I could be a bit lazy, realise now there's no such thing. Keep up the good work, you are amazing.
@@georgemills3006
I wish you good results.👍
hola tienes la plantilla en pdf donde poder descargarla
Hola melvin
Gracias por visualizar mi video
Lo siento, no hay plantilla,
Hice una copia 1: 1 de la cuchilla predeterminada con una fotocopiadora.
Seguramente tendrás éxito.
Gracias
グラインダー捌き上手ですね！
よくブレずに細かい曲線をきれるなーと感心しておりまする😳
やはりブレード厚ごとに専用のライビングナイフあったほうがいいですね(^_^)
ひとつお聞きしたいのですが私のデウォルトテーブルソーは天板の中央部分が微妙に盛り上がり、そこから右端にいくにつれ+0.1〜0.3
左端にいくにつれ-0.1〜0.4度歪んでおりましたが(ムキー‼️(ꐦ°᷄д°᷅))、ohyoさんのはどうですか？
こんにちは S.Kさん
グラインダー使いを褒めていただき嬉しいです！ありがと！
私のテーブルトップも厳密に見るとそれくらいの狂いはありますね！
前使っていたMakitaもそれはそれは酷かったですよ！DIYレベルですから許容範囲ですが・・・・素人の対処法は表部の出っ張り部分にマスキングテープでマークして木槌で叩きます、裏表で気長に微調整するしかないのかな〜？！Makitaはそうしました。
あくまでも私の経緯です、それをチョイスすることは慎重にお願いします。
有り難うございました。
もう木工から鉄に。しかしギャラリに外国の方が多いですね
こんにちは、
日本語しか話せない私のチャンネルに沢山の外国の友人が集ってくれました！インターネットを苦手とする私が何とかしてGoogle翻訳ソフトでコミニュケーションを図っています。有難うよろしく
Perfeito! Tens o desenho em pdf?
Oi Alan
Obrigado por sempre assistindo
E obrigado, bom comentário
Nenhum desenho em PDF disponível, desculpe
Mas copie sua faca Riving 1: 1 e eu criei o modelo dessa maneira.
Até logo
Sempre assisto porque são bons! Comprei a minha dw745 usada e está sem a faca e sem com a guia(fence) danificada. Uso pouco mas quero consertar. Sabes como fazer a guia (fence)?
@@alanamorim8559 Oi alan
Acabei de comprar o DeWalt e ainda não conheço os detalhes. O projeto no qual estou trabalhando agora é fazer uma cerca destacável para ajustar exatamente o pluma de proteção.
Shouldn't it be the same width as the cut? Your blade is thinner than the cut the teeth make.
Hello Boatdesigner
Thank you for watching my video
And thank you for your comment
Yes, yes, as you say, I made and used it and understood, it was totally different in thickness from the Native Blade!
Now I'm using a blade that is the same thickness as this knife.
Thank you very much.
More work than I am willing to do....😁
Hi Tim
Thank you for always checking my video
And thank you nice comment
The shaping of the split knife worked very well! But there is not enough thickness.
Thank you
See you
tendras el plano en pdf de esa cuchilla?
Hola juan
Gracias por ver mi vídeo
Y gracias por tu comentario
Lo sentimos, no hay planos, hice una copia 1: 1 con una copiadora. La curva fue dibujada como me gusta.
Gracias
Nos vemos
@@TachiOhyo56 y no tendrás esa copia 1:1 o podrias hacerme una de tu actual cuchilla, por favor? No puedo encontrar nada y mi sierra vino sin esa cuchilla! Muchas gracias!
おつかれさまです おはようございます
おーーーーーー
そこまで作りますか （（笑））
無駄にする材料がないという 動画ですね―――
第二の命を吹きかまれた材料は しあわせだーーーーー！！
いっぱちさん こんばんは
いつもご覧いただき有り難うございます。
このナイフも一度挑戦してみたかったことです、しかし後で気づきました！のこ刃の切幅が２.８mmでも内側は１.５mmしかないことに！次に作るときは完璧に作ります。
"width of the blade cut and the width of the split knife must be the same"… Actually, my teacher told us that it has to be .5mm wider than the kerf (width of the teeth…), ideally .25 each side, to allow for some wobble. May be a little overkill, but that what's what I was taught…
Hello ean-Christophe Taboada
Thank you for always watching my video
And thank you for your nice comments.
Thank you for your wonderful information, I confirmed it once it was completed! The detailed information you gave me is very important to me!
Greetings from Japan
Thank you
See you
Kick
Hi Hugo.
Thank you for always watching my video
I've been very particular about safety these days, especially kickbacks!
Thank you for your comment.
Lol where’s the knife driving to?
I did a simple mistake
This spell was displayed by typing,
I'm not good at English, so I wrote it down!
Sorry for the silly mistake.
💖
Bonjour AZERTY
Merci d'avoir toujours apprécié ma vidéo💖
Reebok
Hola hugo
Recuerdo el pasado cuando salí a caminar con los zapatos Reebok.
Recuerdos nostálgicos
Gracias
Nos vemos
Wtf? Is this finished? Whats a driving knife? Crap!!!
Riving knife, he typoed it
www.google.com/search?client=firefox-b-1-d&q=riving
@cheo Fel
I did a simple mistake
This spell was displayed by typing,
I'm not good at English, so I wrote it down!
Sorry for the silly mistake.
@@TachiOhyo56 I also made mistake in the word 'crap', I meant 'crop' as in cutting the knife (I thought maybe you cropped it shorter without the handle) ... 'cropping'... ¿Is this for a wooden handle in the part where the holes were drilled?
@@congache Thank you for your reply