Have to agree with Pramod. If the staff are trained properly on the lathes it would save time and make a better product. An assembly bench is essential to keep the components clean. Thank you for the video.
These guys will not work on benches. They prefer the floor for some reason? A British company had problems getting them to work on benches in India years ago !
Parts do not need to be interchangeable as the unit is so cheap you just replace the whole thing, also they are using a metal impeller, if their machining was not perfect the unit would explode, and they don't. Their eye will beat your CNC every day of the week.
The guy working the lathe is wearing a mask but no goggles. He will mess up his eyes with metal splinters but at least he won't get covid from the lathe. 🤣
@@Wonderfullskills start a Patrion Acount so people can donate to you. And sell some stuff you guys make maybe? I wish you would cast small Gears and sell them through youtube hopefully one day. A gear for an RC car sells for 30 40 dollars in America for a gear the size of a Quarter. Lots of ways to make better money. Stay safe .
They are eyeballing the location of the holes...that means the flange needs to be replaced might as well throw the whole pump because a chance of finding the flange which holes fit are quite low.
They have all the equipment to make machines and jigs or whatnot to make the production process multiple times faster and more accurate at their fingertips yet they simply do it the way it's been done for 50 or more years? Is that kind of accurate?
and end up like the west, with unskilled college graduates using computers to create a product that costs 20 times as much to produce and lasts quarter as long. lets go Brandon.
There is no way these dude can get an MRI. I bet they get real good at not touching their eyes and face. God the metal splinters and I'm sure they spill some serious blood every now and again. Hard af! Looks like they cast all their own parts and then lathe down the openings and drill and tap the fastener holes.
Really impressive. If in the United Kingdom we only had that machinery... we would not have water pumps!
Have to agree with Pramod. If the staff are trained properly on the lathes it would save time and make a better product. An assembly bench is essential to keep the components clean. Thank you for the video.
These guys will not work on benches. They prefer the floor for some reason?
A British company had problems getting them to work on benches in India years ago !
В этой пещере за один день продукции клепают больше чем весь "Южмаш" за год
They use the GNT factory torque specs. Good N Tight.
Why don't they use a lathe in a squatting position? This would maximize the possibility of serious injuries.
they should take care of their limbs and eyes ...safety is everything
Ces travailleurs méritent des établies. Bravo à eux.
多少人工作的背後
代表養活多少家庭
多少機器的售出
多少地方的受惠
傳統 金屬加工 確實是精度不高
新的成品 需要 使用一段時間 才會完全磨合順暢
但是 很耐用
曾經在工廠裡打工過
以前 在台灣也是這樣子作業
No standardization. Mill it till it fits. Drill holes anywhere. Parts are not interchangeable.
Parts do not need to be interchangeable as the unit is so cheap you just replace the whole thing, also they are using a metal impeller, if their machining was not perfect the unit would explode, and they don't. Their eye will beat your CNC every day of the week.
The guy working the lathe is wearing a mask but no goggles. He will mess up his eyes with metal splinters but at least he won't get covid from the lathe. 🤣
My greeting to those great engineers HI TO YOU
It may not be precsicion engineering but I'm sure impressed with the ingenuity and work ethic. Doing alot with a little. Just my opinion
傳統 金屬加工 確實是精度不高
新的成品 需要 使用一段時間 才會完全磨合
學生時代 曾經在工廠裡打工過
you make very clever slugs good
This explains why the importer of their Diesel engines recommends you do not run them until it's been totally stripped and rebuilt properly.
Estoy absolutamente de acuerdo con usted. La fiabilidad en los constructores es nula.
Welcome friends are very very very very very very 🇪🇬Greetings from Egypt to this good work 🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹
شكرا صديقي
Love your work guys its good to see tradition get the job done. Bless😐
Thanks 👍
@@Wonderfullskills start a Patrion Acount so people can donate to you. And sell some stuff you guys make maybe? I wish you would cast small Gears and sell them through youtube hopefully one day. A gear for an RC car sells for 30 40 dollars in America for a gear the size of a Quarter. Lots of ways to make better money. Stay safe .
@@Yashsoni4334 without a transaltor ill guess what you said.
You say " click the link in his youtube account". ???
Those sure are some tired old lathes......they work the machines to death
They are eyeballing the location of the holes...that means the flange needs to be replaced might as well throw the whole pump because a chance of finding the flange which holes fit are quite low.
Hmmm....open bearings, dirt floors, and a dash of oil.
What could possibly go wrong? :-))))))
The more oil you add the more dirt will stick.
How do you do work squatting constantly?
Great job
Very Nice and Support
Токарям запасные глаза по ходу выдают при работе
so professional
Good job bro..
Thanks
Important video sirjii 🥰
#nanasaheb paul.... 👋👋👋👋
@@mancingsumatra8886 wc sirji
👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼
How much does 1 kilowatt of electricity cost?
Good work Good job
Thank you so much 😀
Horrific! But also very interesting.
Glad you enjoyed it!
They have all the equipment to make machines and jigs or whatnot to make the production process multiple times faster and more accurate at their fingertips yet they simply do it the way it's been done for 50 or more years?
Is that kind of accurate?
and end up like the west, with unskilled college graduates using computers to create a product that costs 20 times as much to produce and lasts quarter as long. lets go Brandon.
Assalamualaikum my family.....spirit 46 ..... 💪💪💪💪
There is no way these dude can get an MRI. I bet they get real good at not touching their eyes and face. God the metal splinters and I'm sure they spill some serious blood every now and again. Hard af! Looks like they cast all their own parts and then lathe down the openings and drill and tap the fastener holes.
Покажите кино, как эти Кулибины супер процессоры выпиливают при помощи стамески и напильника для "huavei/
VERY GOOD I LIKE
I'm glad you like it
Home industry..
the aluminum poisoning...omg no PPE
Where is this being manufactured
Very nice
Thanks
I love the safety equipment. Hang on...not even using squint goggles or Chinese safety boots? Wtf
this is sad to see. They are not using any oil or water to keep their drill bits sharp or to keep their tools maintained.
Bhai location
заебись
Location ?
Super
Thanks
Kaam milega
Well come to channel water pump viet nam
پاکستانی یونیورسٹیوں کے بڑے بڑے انجینئر ان کے مقابلے میں سفر ھیں، صرف کاغذوں کے انجینئر
Good
So nice
good
Super
Puts a CNC machine to shame !!
What is the cost of this pump
In currency or in human lives?
चाचा क्या आप मुझसे बात कर सकते हो क्या यह आपकी मशीन के पास जो कबाड़ा निकलता है क्या हम हमें दिला सकते हो काम कबाड़ा ले जाने का
PhonNabar do.
Bhai location