Trimble Static Survey Method: How We Doing Static Survey in Trimble GPS GNNS system

In This Video We Discuses ON Static Survey Method: How we start Static Survey, How We connect GNNS Receiver Rover and Its working After Start Static Work, We Will Explain in this Video .
1. Introduction to Static GPS/GNSS
Static GNSS surveys deliver the highest-accuracy positions available in a system, which
occupies a point for longer periods of time than kinematic systems. Static systems include a
range of survey styles from rapid static surveys to continuously operating stations, such as CORS
and PBO sites. The equipment setup varies significantly, depending on how long the site will be
operational, which could vary from 15 minutes to several years. For the practicality of this field
module, instructional material will focus on surveys ranging from rapid static to semi-permanent
installations. Continuously operating permanent stations require many of the same techniques as
other static systems, but require a level of precision and detail in their installation and processing
that is beyond the level of this course.
Static surveys rely on long occupation times to produce high-accuracy positions, and the details
of their setup will vary to reflect the quality of measurements required. A static survey typically
consists of a single receiver and antenna combination, which individually records satellite
observations that are post-processed using a variety of techniques to receive a position. The
precision of the position is a function of the length of survey and also the precision of the
mounting and monument system used. Static surveys require much more stable and precise
mounts than kinematic surveys. A typical mounting system ranges from a range pole and bipod
for rapid static occupations to anchored rods with direct antenna mounts for permanent surveys.
1.1 Rapid Static Survey
Rapid static surveys use shorter occupation times to collect a moderate number of points. They
do this by occupying a given point for a longer period of time than most kinematic surveys but
much less than regular static surveys (Section 1.2 below); typically, rapid static surveys are 15
minutes to 2 hours. A static survey is advantageous due to the simplicity of its setup, using a
single antenna and receiver combination that has half as many components as a kinematic setup.
This configuration is also necessary when radio communications or baseline distances for a
survey exceed the capability of a kinematic design. However, static surveys typically have
reduced accuracy compared to a kinematic survey of the same occupation time. Rapid static
surveys also rely on proximity and availability of CORS or IGS stations for positional
corrections.
1.2 Static Surveys
Static surveys offer the second highest precision of static surveys by occupying a single location
for occupation times ranging from 2 to 48 hours. When processed through OPUS, static surveys
have a maximum accuracy of ~1-2 cm, depending on the quality and length of data collection.
This is most comparable to accuracies achievable by PPK systems with long baselines, but in
general PPK surveys are recommended if a local base station with short baseline is possible.
Static surveys are conducted and processed in the same way as a rapid static survey, but typically
use higher-precision mounts and more equipment, such as large batteries, solar panels, and
equipment enclosures to support the GNSS receivers during the length of the survey. The amount
of equipment needed increases with increased occupation times. See Section 2.3 for advice on
batteries and length of surveys with some known hardware configurations.
trimble,trimble access,trimble gps,trimble connect,tremble,trimble ag,trimble dr,trimble s7,trimble ri,trimble dbo,trimble r10,trimble rtk,trimble r12i,trimble gfx750,trimble dealer,sitech trimble,trimble guidance,trimble s-series,trimble buildings,trimble geospatial,trimble access 2021,trimble agriculture,trimble construction,trimble support videos, SketchUp trimble connect,tremble cover,trimble connect visualizer

[@DhirajKumar-st4sv]

बहुत सुंदर explain and knowledge

[@ATASurvey230]

Nice video Bhai lekin 2nd point pr base Lagany Kay baad static time aur point measure skip kr gaiy ho.

[@imranlandsurveyor]

Mairay hyal Mai b sir ap nay sai farmaya asal bat to btai he nai sir nay Baki ho Sakta hai wo b site conditions k hisab say phasay ho ya itna explain Karna Ka time na ho

[@malikshahzad8826]

ماشاءاللہ بھائی ❤

[@Shahid.Iqbal88]

Informative video hy, 👍
Few points to be added:
1) Free station (withoutout known Control points) k bhi Static survey ho sakta hy. (Its not always necessary to have known points) although k local coordinates k sath matching ka issue ho sakta hy.
2) Base station (jahan sy static start kya hy) k ilawa dosra point cant be ended by just going to static survey and clicking on "End Gnss survey"

[@abayzeedsaed3645]

I am abayzeed from sudan ..thankyou engineer Mohammed muneen

[@muhammadikram481]

Good job ❤

[@Rajakvlogs934]

ماشااللہ

[@juberqureshi9792]

WALEKUM SALAM
Real me bro bahut achha

[@user-rs6dh8lx2w]

yahn tak to acha explain kia h ap nain is se agay control se data system main keasy import krna h or system main static data extract ksy krna h wo b video bna deain.

[@mshahbaz773]

جزاک اللہ سر جی ❤

[@naibullahofficial3116]

Great sir After Long time 🎉

[@dogarcomputeracademy3457]

❤❤❤❤❤❤ Solut

[@muhammadirshadkhan1406]

Great job Bhai👍👍

[@shariqkhan3001]

Well done sir...

[@MuhammadSaeed-bo2qp]

Well come 🎉

[@Aasifsaify]

Nice video.. very helpful

[@AdnanKhan-sw1cp]

Muje abi job mili he survey ka next month se start Karna he likin static survey kabhi nahi kia❤

[@anees906]

Very wellbrother

[@JainulMalik-ii2kt]

MASHA ALLHA..🤲🤲🤲

[@nawabshah4037]

Assalamualaikum brother I need one video tsc5 Trimble setup video thanks

[@faheemgondal1478]

Thank u sir❤

[@majeedbannu]

Good janab 👍
Lkn bass bahoot kanda hi se es ko saf kro 🥰

[@MrAliofficial00]

Sir ap Ka nmber mil sakta h