I really enjoy your videos!! Cool to see you working with your fire system!! Yes they are really stiff lol but you get used to it!! Stay safe and have fun!! ...
I thought any pull station could work with any panel? After all, it basically just contains a switch lever that activates the alarm, right? Or is it more advanced than that?
If it's conventional it's that simple but not if it's a addressable then it needs to be a specific type and specific brand to match the panel for compatibility
I could try and make a video for the select few that would like it my one on the My other ones I have made didn’t do very good but I could I suppose it might be a long video because there’s lots to go over
It’s so satisfying to see out with the old and in with the new the new system is looking really great can’t wait to see it up in action for testing and the heat detector in the bathroom it actually blends in well with the ceiling
If you’re wired class B you will wire it pretty much just like conventional except your last device won’t have your EOLR mine is wired class A so every device you will see 4 wires
Pickle the mounting hole on the bottom allows you to mount in on a screw already on the backbox and that will he,p you keep the station in when you screw it it actually helps me with my mini fire alarm system that uses buzzers instead of fire alarm since they’re much quieter but stil loud though
Please show us the programming of ALPHA Locations into the system. And please point out on the open panel where a Remote ANN -80 Annunciator would be wired. Thank You
Keep up the good work on here mate keep up the good work on here mate keep up the good work on here mate keep up the good work on here mate keep up the good work on here mate form Greg bouchard u do a relly good job on here mate keep
Just looking back at these videos because I am going to be installing a FireLite system in my garage. As a start I am going to install two smoke detectors and two heat detectors in the attic. All 4 of those devices will be addressable. The panel will be a FireLite ES-50X. I do have a small server rack with two servers, two network switches. So later I will add a smoke detector/heat detector combo, I believe that is the FSP-951T. Then I have a UPS that has a dry contact terminal on the back so if you short it, it will tell the UPS to do an emergency shutdown. So I might interface a relay module with the UPS so if that detector activates, it will activate that relay module forcing the UPS to shutdown which I think will be awesome! Then for my alarms I will have 2 SCWLs, one P2W, and later a PC2WL, and for my outdoor device that will be a P2WK. All alarms will be System Sensor of course
@@nics-systems-electric It is! The UPS itself is an Emerson Network Power/Vertiv Liebert GXT4-2000RT120. It is a 2kVA UPS with an input of 120 volts and 20 amp service. There is also an air compressor in the building and that is housed in a cabinet. I am thinking of putting a heat or smoke detector and a control module that will shutdown the air compressor if that has a burnout or something like that. Then at some point add a couple of pull stations
I believe I mentioned it in part one or possibly this one that I wanted to have a class A SLC so I connected the end of the pull station zone to the end of the smoke detector zone for one loop
Do u know when the BG-12s were manufactured? Because my old school and the one I go to now they have BG-12s and I tried to look up when they were made but I can’t find anything.
I love that addressable fire lite lite system. Good job installing. Keep going with the things you love.
I really enjoy your videos!! Cool to see you working with your fire system!! Yes they are really stiff lol but you get used to it!! Stay safe and have fun!! ...
Maybe one day we could do like a collab or something
That would be awesome if u two did!!!
Awesome can’t wait for the next system test!
Great Video! My company installs a lot of Fire-Lite products.
I thought any pull station could work with any panel? After all, it basically just contains a switch lever that activates the alarm, right? Or is it more advanced than that?
If it's conventional it's that simple but not if it's a addressable then it needs to be a specific type and specific brand to match the panel for compatibility
Notifier addressable system with the L Series wall and ceiling appliances
R u replacing all the old ones?
Ye
Now I know why i couldnt get ahold of any LXs or 365s
lol
Call 911 phone 911 call 911
@@brandonwilson4281 ??
Setting addresses in North America is way easier then here in Europe, it’s pretty confusing so I almost refer to the manual every time.
Interesting I didn’t know that
can you test them?
I will when the system is done
Pickle you were soppost to put resistors behind the pull station
No you’re not it’s addressable
can this system dial or send a sms to a mobile number?
There are parts you can add that can send email message
Hello
11 12 13 14 15 16 17 18 19 20
I guessing that if you want to make it conventional you have to switch one screw from the addressable module to the thermal connected to the switch.
21:25 turns on panel
21:37 initializingggg sing songy
What about everything to do with the Fire Lite MS-9200UDLS
I could try and make a video for the select few that would like it my one on the My other ones I have made didn’t do very good but I could I suppose it might be a long video because there’s lots to go over
Ngl I’m gonna miss the notifier, that was one of my favorite panels :(
I might make a demo system with it
@@nics-systems-electric great idea
@XboxAdamAdam Gaming and more what
@XboxAdamAdam Gaming and more K
Im gonna miss the e pull station :(
It’s so satisfying to see out with the old and in with the new the new system is looking really great can’t wait to see it up in action for testing and the heat detector in the bathroom it actually blends in well with the ceiling
I will definitely make a test once it’s all done
@@nics-systems-electric why does the panel needs battery
@@ajichristy4272 it has to stay operational for 24 hours if the power goes out so it needs battery back up
@@nics-systems-electric ok
Good morning @@nics-systems-electric
I live fire alarms how much would it be to get some pull stations and horns and horn stoves and wire it up with 3 9v batarys?
You can get stuff on eBay for pretty cheap sometimes
Hey, question so I just got one of those panels and I’m wiring up the SLC loop and do every pull station need 4 wires?
If you’re wired class B you will wire it pretty much just like conventional except your last device won’t have your EOLR mine is wired class A so every device you will see 4 wires
@@nics-systems-electric Ok, thank you!
what about the outdoor pull station
It’s been disconnected for now
Pickle the mounting hole on the bottom allows you to mount in on a screw already on the backbox and that will he,p you keep the station in when you screw it it actually helps me with my mini fire alarm system that uses buzzers instead of fire alarm since they’re much quieter but stil loud though
Wait you hit 2k subs I didn't notice, congrats.
Thanks
Pickle did you get all of the new pull station from Amazon or from firelite.com?
eBay
out with the old and in with the new
How do you set up a fire alarm system
😮how do you do that
That's not something that can be taught over text it takes hundreds of hours of watching videos reading manuals and real experience
Um
How did you get all of the BG12’s? What’s your secret?
eBay
@@nics-systems-electric ok
It was funny when he when that noise happened in the gym when you try to replace a fire alarm
Like on the PA?
"would it be brokenm"
speed up sounding like animal crossing!
Great job NIC!
-Stormboy4k
Back when Nic used to heart comments
Did you keep the old stuff for collecting
I already own everything
Please show us the programming of ALPHA Locations into the system. And please point out on the open panel where a Remote ANN -80 Annunciator would be wired. Thank You
$.99
Keep up the good work on here mate keep up the good work on here mate keep up the good work on here mate keep up the good work on here mate keep up the good work on here mate form Greg bouchard u do a relly good job on here mate keep
where did you get the EST 270-SPO pull station?
Can remember I’ve got lots over a long time probably from a school though
Thanks though
Because my bg-12 cost $37 off of Amazon
Fairwell to the old edwards 270-SPOs
Do you think the USA Will get the Running man Exit sign just like Canada
Probably not
21 22 23 24 25 26 27 28 29 30 31 32
why no resistors
Because it’s an addressable system
@@nics-systems-electric oh wait if it is a addressable fire lite device you don’t need a resistor
@@DAPchatt Any addressable device does not need resistors unless it’s it’s controlling or monitoring a conventional circuit
@@nics-systems-electric oh ok that saves me money cause i forgot about that
7:23 morse code
22:19 Wait, you have a rail road crossing gate? You can't takes those!
Had it for many years one of the first things on my channel I have a videos about it
What did you do with your old system?
It’s on a demo board
THIS WAS FILMED ON MY BIRTHDAY WHEN I GOT MY FIRST FIRE ALRM how convenient
Did you buy these?
Where did you get the BG-12 LX's?
EBay
Is part 3 out yet
No the garage system replacement was only a two-part series
Just looking back at these videos because I am going to be installing a FireLite system in my garage. As a start I am going to install two smoke detectors and two heat detectors in the attic. All 4 of those devices will be addressable. The panel will be a FireLite ES-50X. I do have a small server rack with two servers, two network switches. So later I will add a smoke detector/heat detector combo, I believe that is the FSP-951T. Then I have a UPS that has a dry contact terminal on the back so if you short it, it will tell the UPS to do an emergency shutdown. So I might interface a relay module with the UPS so if that detector activates, it will activate that relay module forcing the UPS to shutdown which I think will be awesome! Then for my alarms I will have 2 SCWLs, one P2W, and later a PC2WL, and for my outdoor device that will be a P2WK. All alarms will be System Sensor of course
The UPS shut down idea sounds pretty cool
@@nics-systems-electric It is! The UPS itself is an Emerson Network Power/Vertiv Liebert GXT4-2000RT120. It is a 2kVA UPS with an input of 120 volts and 20 amp service. There is also an air compressor in the building and that is housed in a cabinet. I am thinking of putting a heat or smoke detector and a control module that will shutdown the air compressor if that has a burnout or something like that. Then at some point add a couple of pull stations
Where do u buy fire alarms at
eBay
19:37 to 19:21 you aren't using correct grammar.
I meant 19:37 to 19:41
Good thing I’m not an English teacher.
I think last video about this, you said that the ugly one goes in the storage room
Yeah I put the old one in the storage room
Why did you do this :(
To upgrade the fire alarm system?
Ok :)
Hey I have a question, I noticed when you were changing the smoke detector you added a loop? What for could you elaberate on that ?
I believe I mentioned it in part one or possibly this one that I wanted to have a class A SLC so I connected the end of the pull station zone to the end of the smoke detector zone for one loop
@@nics-systems-electric got it! Are you able to Tee tap ? Or does it have to be class A or B
@NIC'S - SYSTEMS & ELECTRIC have you looked at the gentex smoke detectors with the strobes?
Like the residential ones?
@@nics-systems-electric yeah
Do u know when the BG-12s were manufactured? Because my old school and the one I go to now they have BG-12s and I tried to look up when they were made but I can’t find anything.
I think early 2000s
Well they started to be made in 1999. They are old pull stations.
@@SomeDudeWithAnExitSign I was close
@@SomeDudeWithAnExitSign @PICKLE 700 thanks! They don’t seem that old that’s for sure.
@@daydayyy1 IKR.
You need to fake smoke
??? Smoke detector test smoke I have lots
@@nics-systems-electricfog the hole shed out
@@lcstrainspotter3888 Again? I could
@@nics-systems-electric whith your new panel
Do system test next video!!!!!!
Will at some point maybe not next video because the system is not done yet
@@nics-systems-electric ok and did you know simplex makes addressable pull stations?!
@@VOLTRONDEFENDER4440 of course I’ve tested their addressable systems before
@@nics-systems-electric you might have tested the older addressable module because the newer one has a polling light
@@VOLTRONDEFENDER4440 they all have lights