Hey it looks really great. Your build on the green truck is outstanding. If it drives as well after the inlinement, as it looks, you've one hell of a truck my friend. Stay safe take care.
Chances are it is the halo driver module that is acting a bit weird and your wiring is okay. If it isn't difficult, swap the modules around and see if the problem goes to the other side.
I’d like to see a video on your opinion on doing a 3.0 to 3.4 swap. Maybe show us some things to look out for and tips and tricks would be greatly appreciated
Thart truck looks awesome. Thanks for sharing! BTW, When I did the timing chain on the 93 Yota, I took out the intake and the injectors and sent them to Witch Hunter Performance. They refurbished and tested them and they came back like new. Didn't have a problem but since I was working on the engine.
I have a 05 ranger 3.0. It has a similar hot start issue. I've read injectors or a sensor is bad, truck doesn't know its hot. Adds to much (or not enough) fuel. Let us know and good luck!
Hook it up to a obd scanner and see what it shows as the engine temp while hot. If it is not right replace the temp censor for the ecu, youll get your money back from it fast from saved fuel.
I've found: EGR( egrTemp Contol sensor ) throttle to egr CARBON BUILDUP !.clean it to solve restart and hot start issues. also check evap vac hoses purge selnoid switch leaks
Just getting that steering wheel straightened will itself improve the ride quality. It's amazing how much your peripheral vision can keep you from driving straight when part of your brain thinks you're turning.
Dude! Love the build. Instead of flare cut you could have done a ball joint spacer. I have run bj spacers and larger torsion bars in a toy pickup and a 4 runner. Huge difference. I find you can relax the torsion bars (old man emu or sway-a-way) a bit and get a better ride and with bj spacers you can keep the height you need especially with larger tires. Also, an 8” wheel instead of a 10” would help with rub. Your tires are meant to be run on a 7-8” wheel. Cheers.
Motor west is who I used for my 5vz injectors as well. They do great work. I've had no issues and it's been close to a year I think with these new ones in.
I have a similar hot start problem with my carbureted ‘87 pickup. I believe the float level of the bowl is too high, while it’s running it burn gas fast enough to not overfill but once i turn it off, after it sits a minute or two, it starts dripping fuel out of the accelerator jet. Point being, it’s probably an injector leaking fuel into the manifold like you think. Same symptoms, different tech lol
It would be worth checking your Idle Air Control valve, they can get gummed up and cause issues starting up as well, happened on my 3.4 swap. Good luck, keep up the awesome content!
A while back you were asking which truck people liked better, I just wanted to say, I absolutely love the tdi, I talk about that truck all the time, love the channel bud, always look foward to the next adventure.
Austin I hope you see this comment, it’s related to your shocks I found the same ones you have on your tdiyota(12inch I believe?) and was wondering your leaf spring height. I have a 85 Toyota and not sure if I have to match shock&leaf heights
I just went thru that with my 1997 Honda CR-V once warmed up I would drive to the store and 10 minutes later I would go have that hard start I went to junk yard swapped out the injectors out problem solved.
Austin, what do you not like about the scion seats? I picked up a pair out of an 08 scion. Driver's side has a mini flip down arm rest. I'm getting ready to install them in my 87 reg cab. I haven't found a console yet. Thanks for everything you do!
You have inspired me to start fixing up my 2000 tacoma. Keep up the good work and the videos coming!!
Thanks!!
Hey it looks really great. Your build on the green truck is outstanding. If it drives as well after the inlinement, as it looks, you've one hell of a truck my friend. Stay safe take care.
Chances are it is the halo driver module that is acting a bit weird and your wiring is okay. If it isn't difficult, swap the modules around and see if the problem goes to the other side.
you can put a piece of beer box cardboard under the tires and they will turn easy on the garage floor concrete. Nice Work on that truck!
Love your work Jeff. Use what is commonly found in the workshop.👍
Pull your injectors and send them to Mr Injector over in Idaho (CDA). Bill Johnson will clean and completely refurbish them.
I don’t think any build is ever REALLY done lol.
I’d like to see a video on your opinion on doing a 3.0 to 3.4 swap. Maybe show us some things to look out for and tips and tricks would be greatly appreciated
that's a damn good lookin truck homie
Time to price this ride, Austin!
$$,$$$.$$
Hi! I wonder if you consider the 3uz engine as an option for swapping your truck? I know in Russia is very popular among swappers.
Thart truck looks awesome. Thanks for sharing! BTW, When I did the timing chain on the 93 Yota, I took out the intake and the injectors and sent them to Witch Hunter Performance. They refurbished and tested them and they came back like new. Didn't have a problem but since I was working on the engine.
Before you buy injectors take the hose if the canister of the purge valve could be leaking allowing gas fumes to engine
Hey man, It would be awesome if you build a Hilux double cab 3l turbo diesel🤙
Had an issue with a 22re and it was the cold start injector sticking.
A little more positive offset on your wheels would help the rubbing problem.
Es una belleza ese pickup, sos un maestro con los metales, hermoso trabajo...💪🏽👏🏻 Saludos desde Guatemala 🇬🇹
I have a 05 ranger 3.0. It has a similar hot start issue. I've read injectors or a sensor is bad, truck doesn't know its hot. Adds to much (or not enough) fuel. Let us know and good luck!
Hook it up to a obd scanner and see what it shows as the engine temp while hot. If it is not right replace the temp censor for the ecu, youll get your money back from it fast from saved fuel.
Loving the truck Austin! Did you consider painting the tire flares black?
You should do an early 80's build next!
With your skills, you could literally drive your fleet for the next 50 years. Ok, that might be a little boring, but you could give them to your kids.
I've found: EGR( egrTemp Contol sensor ) throttle to egr CARBON BUILDUP !.clean it to solve restart and hot start issues. also check evap vac hoses purge selnoid switch leaks
Just getting that steering wheel straightened will itself improve the ride quality. It's amazing how much your peripheral vision can keep you from driving straight when part of your brain thinks you're turning.
Came here to say the same. :) Great work, Austin. Really appreciate you bringing us along for all of it.
Don’t ya love it when a plan comes together 👍🇦🇺😂😷
The formed set is so nice, though. The raised sides are crazy useful. Buy once, cry once
love that sound of this 6 banger
Dude! Love the build. Instead of flare cut you could have done a ball joint spacer. I have run bj spacers and larger torsion bars in a toy pickup and a 4 runner. Huge difference. I find you can relax the torsion bars (old man emu or sway-a-way) a bit and get a better ride and with bj spacers you can keep the height you need especially with larger tires. Also, an 8” wheel instead of a 10” would help with rub. Your tires are meant to be run on a 7-8” wheel. Cheers.
Motor west is who I used for my 5vz injectors as well. They do great work. I've had no issues and it's been close to a year I think with these new ones in.
I have a similar hot start problem with my carbureted ‘87 pickup. I believe the float level of the bowl is too high, while it’s running it burn gas fast enough to not overfill but once i turn it off, after it sits a minute or two, it starts dripping fuel out of the accelerator jet. Point being, it’s probably an injector leaking fuel into the manifold like you think. Same symptoms, different tech lol
Yeah pretty sure it’s a leaking injector!
Hey Austin! Got my MTGA t shirt yesterday! Great quality, nice printing and folded perfectly flat. Thanks for the great vids and merch.
Awesome thank you!! 👍
Mto bacana essas toyotas , e o cara manda mto e faz várias modificações top
Looks great! Good job
It would be worth checking your Idle Air Control valve, they can get gummed up and cause issues starting up as well, happened on my 3.4 swap. Good luck, keep up the awesome content!
Thanks! I have gone through the IAC already
nothing wrong w/ the flares; wrong size tires- or wheels.
Bro it’s never done! Keep it up.
A while back you were asking which truck people liked better, I just wanted to say, I absolutely love the tdi, I talk about that truck all the time, love the channel bud, always look foward to the next adventure.
Awesome thank you!!
Coils fail also. My 3.4 had issues on a cylinder and narrowed it down to the coil.
I had a similar problem and it was in the throttle body I had to replace it.
Try your cold start injector its on the front passenger side
Looks like those tires balanced well. That is one of my concerns but I need to order tires for my truck soon.
Also how good are they in the snow?
So far they are great! And yeah balanced out good
@@austinniemela perfect I am just trying to find an affordable 33in tire that will work good year round
Fuel pressure regulator. Losing fuel pressure thus not having any fuel remaining in line to start as should.
Just an advice...
What kind of headers and exhaust set up do you have ?
Stock headers, 2.5” flowmaster
To each their own but I would have recommended a tray style.
Still a great video as always
He can always upgrade, worth seeing how they do.
Austin I hope you see this comment, it’s related to your shocks I found the same ones you have on your tdiyota(12inch I believe?) and was wondering your leaf spring height. I have a 85 Toyota and not sure if I have to match shock&leaf heights
My springs are 4" on the red truck!
@@austinniemela are there the shocks you bought?.. , Bilstein 5125 Series Shock Absorber - 33-230382/ Bilstein 5125 Series Shock Absorber - 33-230436
So are both of the lights connected to the sidelights or only the passenger side?
Both are connected to the running lights
do the silicone water hoses seal better?
What engine u got in the green Toy. . V 6?
Needs the air box mods as well
Les Schwab used to come to my school in Bend. Said to hear the company got sold.
My 3.0 does the same thing with the hot start. Haven’t been able to figure out why yet
1000% the injectors, my truck had the same problem and I bought 6 new oem injectors and problem solved!
I just went thru that with my 1997 Honda CR-V once warmed up I would drive to the store and 10 minutes later I would go have that hard start I went to junk yard swapped out the injectors out problem solved.
What bucket seats you running in the red truck? Really dig the look of them
Nissan Pathfinder. Honestly might buy a set for the green truck. They fit a lot better
@@austinniemela they look really good! I’m gonna still your idea lol hopefully my junk yard has one
@@lukebiggins904 heck yeah!
Austin, what do you not like about the scion seats? I picked up a pair out of an 08 scion. Driver's side has a mini flip down arm rest. I'm getting ready to install them in my 87 reg cab. I haven't found a console yet. Thanks for everything you do!
@@darrylvohs5526 they are very comfortable but they are pretty tall and I’m 6’. The pathfinder seats I have in the red truck fit me better
Always wondered about those Costco mats
Got some skills
What lift kit would you recommend for a 3" suspension lift? I have a 2000 Toyota Tacoma.
Bilstein 5100 with OME or Eibach springs!
@@austinniemela thanks brother 👍
Always an interesting video
That steering wheel is hell
Hadir bang sampean inspirasiku thanks a lot
Is the green truck a 3.4 litre swap from a first gen tacoma?
Yes it is!
Whats the tire used??
Hey what size rims and tires on the green truck? And what lift?
16x10 wheels, 285 tires and 1.5” body lift with torsion bars cranked up
@@austinniemela sweet! Thanks bro appreciate the feedback
I went with husky mats
I got mine for $70 but now selling at $96 laser cut
Hot start issue could be the fuel pump
What offset are the rims?!
Vietnams love you . Wecom vietnams
I would like to buy the green pick up I like
Good i love my toyota
Good
Que medida de llanta usaste
What lift is on the truck?
1.5” body lift and cranked torsion bars
@@austinniemela okay thank you
👍
SO WHAT'S NEXT??????
Austin, I really like your videos man, but I really think you need to invest on some lighting, almost everything you show is dark, very dark
Try putting up your brightness. They look great on my phone...
@@gonzalosanchez6387 I don't think that's it, I watch these videos on a brand new 55 inch TV.
@@Precivilization they look great on my computer and phone!
The videos are fine on my phone and both of my tablets.
Most of the shop scenes are good, except when under the trucks.
TOYOTA. kuayis👍
+
👍👍🌺🌹😍
👍