First in a short series of 3 Harley Benton's: Harley Benton TE-52 VT Telecaster setup...
ฝัง
- เผยแพร่เมื่อ 15 ต.ค. 2024
- / ngoneseven ||| fretfriend.co.uk ||| (Disclaimer below):
NOTE: Please remember that these video's are recorded many months before they are released (sometimes 7-8 months or more). I may have changed my opinion on something mentioned in this video by the time it is released! Victor...
DISCLAIMER: These are client video's (for my reference and for the clients record) so should not be viewed as 'instructional' or 'how to' video's! I post this information to try and put an end to viewers informing me that my 'camera angle is wrong' or 'I missed such and such out' etc. These video's are for the benefit of the client and myself...
Great video Victor. So heartening to hear the phrase "save the client some money"! A phrase seldom heard these days!
It’s that kind of ethic that creates repeat customers for sure.
An absolute masterclass! You`ve given me the confidence to tweak my HB TE90 FLT. Thank you Victor.👍
I bought one of those. I had to set the intonation on it and that was all. The frets are perfect.
Another Harley Benton which needs fret work, such a shame they can't increase their prices by £20 or so and spend 30mins longer on the fret leveling! Cool vids BTW man! 👍👍👍
Excellent video. Learned some new things about setup of my HB TE52. Thank you.
Have two CV50s and got that HB yesterday. HB neck was thicker and literally perfect in every way. I was floored!! One of my CV need first fret replaced being too low. Neither brand had great pups or electronics but heart of these guitars are excellent.
I suppose it's different for different people. I love the pickups in my CV 50's Tele in as much as I still have the stock ones in after 3 years ownership...
After a while the truss rods make the neck s shaped, and the strings put a twist in them. To fix that we have to take all the frets of and sand the finger board level and re profile it. Then re fret it and adjust the frets again after it is re strung. A few microns makes quite a difference. It takes quite a long time, but necks are only going to bend and twist so much. Once it is done we get a well playing instrument and it will probably stay that way.
This is really great to watch, thank You!😀
I have three Harley Bentons, 1 five-string fretless Bass - HBZ-2005FL NT, 1 five-string fretted - MB-5 SB...and a ST-62 BK Vintage Series. All I did was a little fretwork . leveling, crowning and polishing, the fretless got a brass nut, the ST a GraphTech TUSQ, and I am happy with that Instruments! For my 4-string Cort i made also a shim, looks nearly exactly like Yours, but it is maple veneer!🙂
I live in Germany.
Thanks for running through the process but I would have sorted the fret ends before all the fret levelling and then clamping it in an engineering vice, even with the padding you could have undone your meticulous work.
Thanks just ordered one. Hope the quality control has remained the same : )
At first glance I thought this channel was named "Fret Fiend". But you are clearly more of a friend than a fiend, sir. Thank you for the videos.
I am considering getting one of these as a modding platform, the bodies on these are now poplar, I would prefer an ash body and so I will look to see if there are any old used ones on the market, I have many Harley Bentons and have never had one with sharp frets and only two that I needed to do a complete fret level, but I level them all if I have more than 4, back in the '80s I only ever had one guitar that didn't need a fret level, that was a 1984 Squier Telecaster, in fact the guitar didn't need anything doing to it, that was strange for an '80s guitar.
One of the things I like about this guitar is that that it doesn't have the horrible orange tints that many Teles come with these days.
Did you end up buying one of these? if so are the edges of the fretboard rolled?
Those £100+ Bumblebees that Fender were selling were the exact same 20 pence components I had bought for prototype circuits with a shrinkwrap Bumblebee cover on them, they were not quality componants.
Hi Andrew... No, I did not buy one of these but I seriously considered it. I am sure with a few tweaks and some upgrades there is a very good instrument there. I personally prefer the Squier Classic Vibe series of guitars. I have had a CV Tele from new for around 4 years and it is still all stock and wonderful!
I know all about the Bumblebee caps :P I actually have one left over from a project I did for a client (there was a spare which I paid for and kept). at the end of the day, a cap is a cap so even 5c cap will sound exactly like a $100 one so long as the measurement of capacitance is equal. Regards, Victor...
Interested in your thoughts 3 years on. If price weren't an issue, how does it compare with the Classic Vibe?
Classic Vibe all the way for me. Fender sized and very good spec. I bought my CV Tele 3 years ago and barring the saddles/bridge-plate (Wilkinson compensated) it's still stock. It did need a fret level mind but it's a fabulous guitar...
@@FretFriendGWaL Thank you for the very helpful reply. Cheers 🍻
Mate this is the best set up and instructional videos I've seen...what area are you located in because if you're anywhere local to me I'd like you to do my guitars ...if you've got a website how can I find it ?......oops I just watchd until the end 🙈🙈 again though , very impressive work
Great attention to detail. Superb
thanks for clear explanation and demonstration of fret levelling
Thanks buddy 😁
I have the HB black paisley Tele. Love it!
Cracking vlog Victor, very impressive guitar for sure, been using Thomann for a number of years and always found them, and their products, very good, others may disagree but you can only really go on your own experiences ..tks again :-)
Brought a HB ST-59 recently a great little guitar.
The new HB T52 VT series have the "caramelised" roasted look neck, and its not roasted at all
it has a liquid type finish coating all over the neck, as it can be scratched off, leaving the natural colour
showing thru so it is Lacquered
Lol hey stooge you won't get real roasted maple neck on a $130 guitar. Putz
The colour has come off of my neck in a couple of places recently.If I liked the guitar I'd take all the colour off as I don't like the new brownier neck.Don't know how much they changed but mine is super heavy and the neck is really thick.I think they might have been tweaked even further since I got mine as the thomann site specs now say 12" radius and mine is 14".I should have sent it straight back but started messing with it.Ended up buying a pink te62 and I love it.Incidentally,there's 22 frets on my te52 which I thought odd.
Rock n rolly,victor!👍🔩🔧⚙🎸🎶🎵
Great video! Which would you say is better, the t2 or the black paisley t70 you also had on your bench?
I wouldn't buy one myself but for the money, the TE52 is hard to resist. I prefer a conventional Tele so that one fits the mould. Victor...
@@FretFriendGWaL thanks! Why wouldn’t you buy a te52 yourself?
@@stealthbum34 Because a Squier Classic Vibe Tele is miles better and I have one of those. I don't think the Harley Benton's are great value considering 90% of the ones I ever had in needed a complete fret level: a time consuming and expensive job. If you are fortunate enough to get one that needs no fret work, then they are worth it...
@@stealthbum34 It's just a personal thing! I've seen enough of cheaply built guitars to know that even though there are good ones, good ones are few and far between. I would much rather pay more for a used guitar with a proven track record than a cheap one to do up. Don't get me wrong: there will be the odd exceptional cheap guitar out there but you need lady luck on your side to find one. Harley's are too inconsistent for me. Personal choice...
You should have a look at the Harley Benton TE-90FLT Blast-series. I like them so much I’ve bought three 😹
@エリス春菜 😹 very droll 😹 they are amazing and one of the three is going to be a gift for my Brother-in-Law.
Another great video mate, enjoying it as always!
Ash is great tone wood
No graphtech nut and string trees? All the ash trees in america are being killed by beetles
Hi guys :) I prefer a bone nut myself but in this case, I did what the client asked for. Victor...
thanks man.... keep the customer satisfied
What was the weight difference between the 2 tele’s ?
No idea...
@@FretFriendGWaL you mentioned you would weigh them early in the video
@@mannydecastro8604 Then I forgot to weigh them! Sorry but it is impossible for me to remember what I said on a video. I make many videos. Victor...
Wait, I don't play guitar. Whoops, sorry Vicar!
:D :D :D
Esquaaaiaaaa!!!
Indeed...