Hi, @billd5361. There is a low oil switch and it doesn't come with oil. That's where I would start. There is also the panic bar and door open switches that will keep it from starting. Try those as well.
Hi, @@billd5361 . Weak or intermittent spark might be a bad plug, or maybe slow rotational speed. I find mine is heavy to pull start and needs full choke even when warm.
Hi, Topher. Thanks for watching and for commenting. Yes, I have modified the out feed shoot to better direct the material. May you have an amazing week!
Hi, Buckdangt3343. Good eye, but it is actually the hydrostatic version: B112. It has been a great tractor. Sadly, they just don't make them like this any more. Thanks for watching & commenting. Have a glorious week!
like came from Russia! question ? Is this branch chopper really so necessary to buy and keep it on the farm .. tell me my friend the name of the tractor that transports the chopper knew if I knew this brand during
Yes, the chipper is necessary, because we cut down a lot of dead trees. We need to do something with the small branches and you can't burn them without permission from the local government.
Hi, Jake. I would, but my hands won't let me pickup that many anymore. Thanks for watching and for commenting. May something truly amazing happen for you today!
I know the manual called for a specific amount of oil but there was already an unknown amount in there. The left side access had a dip stick. If it didn't register I would have added enough until the dip stick read correctly. EDIT - Notice on the oil fill instructions it stated "insert the dipstick into filler neck WITHOUT screwing it in". Some manufacturers require it to be screwed in. Check your manual.
Hi, Toro220d. I wouldn't doubt that it is. Everything seems to be a knock off of something else these days. Thank you for watching the video and for leaving a comment. Have a glorious weekend!
It is a 15 hp engine, and the manual does not say that it needs to be run in. It had some oil in it when I got it, so I think the factory does the run in.
Hi, LoggerJohn. Yes, an electric start would be nice, but there is no way to add one. There is no mounting hole and the flywheel doesn't have a ring gear.
It doesn't come with assembly instructions but I did a video showing how it goes together. There are some tips and tricks in it that others have found helpful. th-cam.com/video/rnp1eb0u06g/w-d-xo.html
Can’t get started from new. Have some spark, but doesn’t seem consistent. Any thoughts?
Hi, @billd5361. There is a low oil switch and it doesn't come with oil. That's where I would start. There is also the panic bar and door open switches that will keep it from starting. Try those as well.
@@ByTheGraceOfGod316 Thanks for the reply. I did add oil. The panic bar and door switch seem to operate, or I think I wouldn't get nay spark at all?
Hi, @@billd5361 . Weak or intermittent spark might be a bad plug, or maybe slow rotational speed. I find mine is heavy to pull start and needs full choke even when warm.
@@ByTheGraceOfGod316 it was a faulty oil switch out of the box. bypassed it and it ran first pull
The chipper worked very well and is a nice addition to your line of equipment !!!
Hi, Del. Yes, it has and will be very useful, if I can find a place to store it.
Good Day My Friend.....Looks Like it Works Well.....Greetings From N.E. Vermont
Hi, Dean. You are correct, it does work well. Greetings back at you from Canada.
Top....
Greetings from Germany Peter 😎👍
Thank you for watching and commenting! Greeting back at you from Canada!
@@ByTheGraceOfGod316 👍👍
Make sides higher on trailer and modify out shoot to flow better. Nice informative video.
Hi, Topher. Thanks for watching and for commenting. Yes, I have modified the out feed shoot to better direct the material. May you have an amazing week!
Very useful video
Hi, Chris. Glad you found it helpful. May you have a wonderful week!
The chips that are formed as a result of chopping branches are used somewhere or is it just to remove excess debris from the forest?😊
We use them in our vegetable garden and on our bush paths for weed control.
Nice B12 you have there
Hi, Buckdangt3343. Good eye, but it is actually the hydrostatic version: B112. It has been a great tractor. Sadly, they just don't make them like this any more. Thanks for watching & commenting. Have a glorious week!
like came from Russia! question ?
Is this branch chopper really so necessary to buy and keep it on the farm .. tell me my friend the name of the tractor that transports the chopper knew if I knew this brand during
Yes, the chipper is necessary, because we cut down a lot of dead trees. We need to do something with the small branches and you can't burn them without permission from the local government.
The tractor is an Allis Chalmers HB112.
Put 5 branches in at one time not 1 that machine Will take a 6 inch branch lol😊
Hi, Jake. I would, but my hands won't let me pickup that many anymore. Thanks for watching and for commenting. May something truly amazing happen for you today!
The branch chopper is made in Canada or China lol😊😊😊
Like everything these days, it is made in China.
👍
Back at you: 👍. Thank you for watching and commenting.
I know the manual called for a specific amount of oil but there was already an unknown amount in there. The left side access had a dip stick. If it didn't register I would have added enough until the dip stick read correctly. EDIT - Notice on the oil fill instructions it stated "insert the dipstick into filler neck WITHOUT screwing it in". Some manufacturers require it to be screwed in. Check your manual.
It looks like it's A DK power knock off
Hi, Toro220d. I wouldn't doubt that it is. Everything seems to be a knock off of something else these days. Thank you for watching the video and for leaving a comment. Have a glorious weekend!
I want to know how much horsepower this gasoline engine has and whether the engine needs to be run in before using the question
It is a 15 hp engine, and the manual does not say that it needs to be run in. It had some oil in it when I got it, so I think the factory does the run in.
As I understand it, the forest area is not far from the house, since the tractor is clearly used for short distances with a double trailer?)😊
You are correct. The bush is about 30 metres from the house. You can see it in some of the videos.
It seems to work very well! An electric start would be nice. Thanks for sharing.
Hi, LoggerJohn. Yes, an electric start would be nice, but there is no way to add one. There is no mounting hole and the flywheel doesn't have a ring gear.
Would you recommend one of these, im looking at one today
Absolutely. They are a joy to use. Do your first oil change at less than 2 hours run time.
@@ByTheGraceOfGod316 Thanks so much.
It doesn't come with assembly instructions but I did a video showing how it goes together. There are some tips and tricks in it that others have found helpful. th-cam.com/video/rnp1eb0u06g/w-d-xo.html
Thanx, now i want one to
Hi, Smith64000. They are well worth the money, if you need one. They come on sale fairly often. Have an amazing week!