Kegman Carbonator for Making Seltzer
ฝัง
- เผยแพร่เมื่อ 20 ต.ค. 2024
- Get the carbonator here www.kegman.net...
Our carbonator comes with 1/3 hp motor, warranty, 2 gallon brite tank and all the fittings to do the install yourself. Comes with hose cutter, pincer tools, hose, fittings, high pressure braided seltzer and water lines www.kegman.net/
Great question Sean. Some of our clients put the whole unit in the "walk-in" but most chill the seltzer after carbonating. Cold Plate, jockey box, flash chiller, etc.
So the entire unit can go into the refrigerator ? The motor will be fine with the cold and possible condensation ?
Many have built that kit. You do need to put some holes in the fridge though.
The brass pump is Ok for water but if you want to carbonate wine or something acidic you need a stainless pump. We can customize the carbonator for you. The check valve will stop the backflow problem from happening
that's confusing. the backflow is used to prevent the soda water from flowing back into the water supply, if the soda water comes into contact with the brass procon pump it could cause someone to get ill (very very slim chance) mostly to save CO2 gas from leaking back. the stainless steel pump he is talking about would be used if your circulating soda water in a CLOSED system such as a McDonalds..sounds like he is trying to upgrade you and make extra $$$$$
@@paulbunyun4479 HI Paul, we only recommend the stainless pump for clients that are pushing acidic beverages through the pump. Wine, fruit juice, etc. The regular brass pump is fine for our water customers. No need to upgrade. If the backflow preventer fails it is an easy swap. Fairly rare but does happen to some folks that buy used carbonators
What do you use to connect the valves under the sink to the carbonator pump?
Advantage of this vs carbon canister direct to the spray nozzle?
i have this carbonator but im looking at yours and see a tube that is connected to the brass connection next to the water inlet what is that for because mine is leaking from that spot
Hi, that's the backflow preventer. It keeps the CO2 from going back through the pump. We stock replacements if you still think you need one. Fairly easy to swap out
Are you able to control how many volumes you infuse ? Or gr/l ? Would you be able to use this to fill up kegs ? No o2 pickup?
Please help: I have 2 carbonators, 1 i bought used from a restaurant and the other i just bought brand new. My issue is when i purchased the used one, i took it apart to clean the water tank and it had a bunch of black flakes that dissolve when you press, i decided to purchase a brand new McCanns because didnt want to take a health risk, but i was so curious i pulled the floater off and low and behold there are black flakes on the bottom of a brand new unit. My water is filter with Reverse Osmosis. Im trying to understand if its residue from the pump, or the stainless tank.
the old pump
Hell yeah Kegman!
Does this require a pressure reduce to run correctly? Or can you hook it directly to house water?
Im here in the Philippines how can i order that to start small business.. how much it cost
En qué parte del Perú ay para conprar
If the motor is brass there is no problem in that part of the pump with the carbonated water maybe flowing thru the brass(if somehow the water goes backwards), also do I chill the water first or after going thru the carbonator?
Thanks
The brass pump only comes in contact with your water supply. These pumps meet California ultra-low-lead brass mandates. There is, almost certainly, something far more questionable somewhere in your water supply path. The pump pushes fresh supply water into the tank where it is carbonated. The tank itself and all lines/fittings are stainless steel. At no point does the carbonated water come into contact with brass.
Hello I’m new to this I just purchased a 6 valve counter electric soda dispenser it’s has the carbonator with it I was wondering which hose do I connect to the soda machine to get the carbonated water to the machine ?
Hi Steven, I would think it is already connected if the carbonator is built in. We can try to get you an answer but I think the manufacturer of where and what you bought can help too. What did you buy and from who?
Do you need to refrigerate the whole unit? Or would you run coiled line through a mini fridge? Other than the co2 what do you need? Do you sell a hand held dispenser gun as well? Really interested in the unit.
Great question Sean. Some of our clients put the whole unit in the "walk-in" but most chill the seltzer after carbonating. Cold Plate, jockey box, flash chiller, etc. Give us a call. We will will discuss what is best for what you are trying to do. 973-512-2028
Thanks for the information. What is the minimum liquid input pressure required for operation?
Water in should be around 30 at the low end. Don't starve the pump or you will have issues in a years time
will this unit come with attachments for the co2 tank? what about water hookup? can it be fed water from a 5 gal carboy?
Hi, to feed the water in to the carbonator you need a pump or gravity feed. The pump does not pull. Call and we can discuss how to get you running. 973-512-2028
Hi im looking to start a tea based energy drink, and would like to produce 500 to 1000 case of 24 12oz plastic bottles per week, will this be a good match for me. And also the fitting for the water, can i plug it directly to the tea ?,,
HI Tony, This carbonator isn't capable of keeping up with that volume. Most clients start off with the motorized carbonator in the trial phase and work out the process before investing in the full production. Yes we can modify the pump to handle the tea. Call us at 973-512-2028 if you're interested in ordering the starter kit
Sirve para gaseosa de sabores
what's the clear plastic hose on the t-connector between pump and tank?
That's to drain the backflow preventer
Its leaking water on my unit. How do I fix it?
So do you still need a CO2 connected in order to make seltzer or just connect water line?
You need to add Co2 to make carbonated water. Let us know if we can help you with any equipment needs. kegman.net
Learn how to make seltzer on www.kegman.net
Thanks for the video. Can you also carbonate a soda with this machine ( juice+sugar+water)?
Yes you can but we will switch the pump for you
@@kegmannet Thanks, what do you mean? Why do I need a different pump?
@@carlobettinelli2069 the juice is acidic so we swap out to an all stainless pump so you don't get any brass in the drink. Only a concern for acidic mixes, wine, juices, etc. Call us if you want us to build you one. 973-512-2028
@@kegmannet thanks a lot! Is possibile to open for cleaning The tank where the co2 is mixed with the liquid?
@@carlobettinelli2069 No way
Hi Steve, If the street pressure is high, over 55 psi you can have issues. So, yes bring in a pressure reducer valve. We sell them at kegman.net Most of our clients don't need to use them. Other ?'s 973-512-2028
Parece que internaron copiar una máquina italiana
We can ship overseas if required. Contact the office at thekegman@kegman.net Sorry we don't speak Italian