How to make fm radio easy at home - simple step with circuit diagram
ฝัง
- เผยแพร่เมื่อ 6 พ.ค. 2019
- in this video we learn how to make fm radio easy at home in this project we use TA2003P IC. its specially design for radio. we try to explain every thing easy step by step with circuit diagram.
Learn More:
www.easycreativeprojects.com/... - แนวปฏิบัติและการใช้ชีวิต
Excellent. Thank you sir
you welcome.
can i use a 10.7mh quart cristal for that 2 pin 10.7mh ceramic filter?
Good video, thank you, please could you do an FM radio using the sony CXA1191P circuit, I try to do that but until now it does not work for me, thanks Greetings from Peru.
i am so so sorry dear. this time CXA1191P radio ic not available. but i try to find it as soon as.
these project total depend on ic. i think you ic not working.
check your ic and try again i hope your problem solve.
thanks.
what FM band does the receiver cover?
Good 👍
Sir ur video is very helpful. But i got very low sound to noise ratio even with a 14W amp and abt 3 foot long antenna
1st try to use amplifier circuit. if you are facing still noise then
check ceramic filter. or try to use good quality filter. i think ceramic filter cannot filter properly.
Is all the components available in market
Clear
If i want it works under 88Mhz, what should i do Mr? Tx u
I had tried this circuit but could not tune any FM radio station, sometimes any small voice but very noisy, so the sound could not hear clearly. I guess there is any problem with the tuning circuits. Is it the coil can be altered?
try to use large antenna. i hope its show you clear sound.
thanks.
How to make 100watt home theater box
Sir how to adjust frequency on variable capasitor sir plz tell.
simple rotate and adjust it as your demanding channel.
Quisiera que hagas una radio con cd 2003p
Ya hay un vídeo subido hablando de ese integrado es el mismo circuito solamente cambia el nombre del IC, o buscá Radio FM con CD2003GP
Hello, i want to begin with the proyect but i have one question
at this moment on my hand have 2 unid filter ceramic of 3 pin ¿can i use 3 pin instead of 2 pin?
no
@@EasyCreativeProjects Can i use a 2 pin crystal 10.7mhz oscilator instead of that 2pin 10.7mhz ceramic filter??????
@@christiancoding no my friend. ceramic filter use for filter frequency. and oscillator use for produces continuous.
Nicevideo
thanks.
2 ,3, pin ceramic filter is where from buy please link send me
you can buy it from any electronic component shop.
I would like to ask which type of speaker I should use? Thanks.
dear you can use any available speaker.
thanks.
@@EasyCreativeProjects ok, thx
I have a radio circuit and i want to make a radio using that. So how i will control the frequency
dear you can control frequency using variable capacitor ( tuner) .
What will be its range?
dear its simple fm frequency base radio. its frequency start round about 88Mhz to 106Mhz
I am ask how can I know pin to connect power with any ic
dear simple follow circuit diagram every thing is in diagram.
Where to connect other side of 15pf ???
dear 2nd side of 15pf connect with 4 turn coil. for more detail you can visit our website.
thanks.
@@EasyCreativeProjects so, connect third leg of variable cap to spot between the 15 pf cap and the 4 turn coil?
Hello friend
I am a beginner in Electronics,
Unfortunately،the two pin ceramic filter (j10.7 mhz) is not avalible in my country. Please let me know if there is a replace for this specific filter.
Regards
Hello, please tell me
Ceramic filter j10.7 mhz
2 pins
Not available in my country can replace the oscillator crystal 8.00 mhz or 12.0 mhz
This piece is not even found on old radios or old cassette recorders 😞
ceramic filter function only to filter sound.
if you don't use filter then you can found distraction in sound.
you can buy it from online chanese shops.
thanks.
@@EasyCreativeProjects
So it is possible to close the circuit without a ceramic filter j10.7 mhz 2 pins and get the result ??? And will the circuit work with any ic sp 2003 or csc2003p (HWCAT)?
Thank you my friends
@@farhadafshai9893 if you want to catch 10.7mhz frequency then you need filter. other wise filter has no other function.
ta2003, or 2003p all are same name.
before buying ask for radio ic.
thanks.
@@EasyCreativeProjects
But the fm frequency range is between (87.5 to 108) mhz
While you say the filter catches the 10.7mhz frequency
Excuse me, but tell me, a circuit without a j10.7 mhz 2-pin filter works ???
Does the circuit work with 8.00 mhz or 12 mhz crystals? Or we will not do anything instead, if you can close the circuit without a 2-pin j10.7 mhz filter, (Mersi❤🌍) thank you (ممنونم)/ شکرا
Thank you im so so sorry but 2 pin filter j10.7 mhz not found in my country😞😞😞😞😞😞😞🌍
Please tell me
Input voltage
its work on 5v power supply.
everything explain in video circuit diagram. watch video carefully and make same.
thanks.
@@EasyCreativeProjects thanks
Why Do We Need Ceramic Filter? Its Not Available In My place
we need for control frequency, without this you cannot filter your frequency.
Any alternative component?
@@EasyCreativeProjects do they have polarity?
@@EasyCreativeProjects i found them but they have a red spot. does it mean something?
REDIO KEISE BANAY KOI BHI IC SE
dear follow circuit diagram.
Any one who make this project
i build it and no working :-(
dear don"t worry.
its very simple fm radio circuit. its total work in single ic.
1st check your ic.
2nd recheck all circuits.
and try again. i hope this time you complete project.
thanks.
How can I check this ic?
tuner There is no in diagram 🤔
dear see right side 3 pin tunner connection setting.
its very simple
1st pin connect with 15 number pin
2nd pin connect with 2 number ic pin
and 3rd pin connect with 15pf capacitor.
for more detail you can visit our website.
thanks.
@@EasyCreativeProjects Can you cancel 10,7 2pin Because it is not available
dear 10.7Mhz ceramic filter is use for filter frequency. if you not use it then how you filter channel?
@@EasyCreativeProjects I have 16.93 2pin
Not working
its simple 1 ic circuit. check circuit diagram and find your mistake. i hope this time you success.
thanks.
No I tried 4 times.. Not even hearing a sound.. Pls what to do??.. I did it in the same way as mentioned in the ciruit diagramme.. No mistake.. Absolutely none.. Tried several times.. But not working.. Atleast i want to hear noise..
its mean your ic is dead. try to find good quality ic and then try.
its total depend on ic. if your ic dead then you dont listen any sound.
if you buy simple fm radio from shop then you also find same circuit.
thanks.
@@EasyCreativeProjects is it? I bought a new ic from the shop.. My multimeter is not working Or else I would have checked it.. Power is not reching the speaker that's the problem.. Thanku so much for your suggestion
Pls don't try this.. It's fake.. Not working.. I tried 7times..the same circuit.. ..
dear try to learn about TA2003p ic.
what is this?
how its work?
if you dont understand any circuit its doesn't mean that circuit is fake.
its mean you do some thing wrong.
if you dont like this so leave this circuit and find any other ta2003p ic circuit and try that.
company make this ic only for radio. so how you say its fake. ?
@@EasyCreativeProjects my friend also tried the same circuit.. I know 2003 ic is used for radio but here current is not reaching the speaker.. I tested with multimeter..
so its mean circuit is fake or ic is burn?
@@EasyCreativeProjects lol.. As u said.. I went to my nearby electronic shop and bought 2 ic extra.. Yet it didn't worked.. This is 100% fake.. Pls no one should try this.. Pls don't waste ur time nd money
as you wish my friend.