Beautiful restoration on the needle nose pliers The pliers looked better now than they were brand new .. It's great to see made in America tools being restored .. Great Sunday morning video Mr Magdad and Mr Chuck Take care looking out for next Sunday's video
Nice to see another piece of American steel craftsmanship preserved for the future. I don't care how nicely any of the imported tools are made. There's just something about holding a piece of American quality in your hand!
I have the exact same Channelock needle nose pliers, but I refurbished mine by hand. My pliers are not as pretty as your pliers but I sure like the handle embellishments.
No you aren't the only one that finds that satisfying. I just freed up a piston in a dirtbike for my niece and I used my evacuator to suck out a lot of that kind of ooze. Compression is up to 225psi due to the oil but cylinder looks great. Got fire, fuel is next. Nice job, anyone would be proud to have those now!
I also get enjoyment seeing the "patina" ooze out. That is the sign of success! Nice job as usual Magdad. They look wonderful. By the way, I've copied your shrink-wrapped wire brush concept. It works great! Thanks!
Hey !Bonjour Magdad vraiment une très belle restauration de cette pince à aiguille, elle est vraiment superbe, brillante à souhait et la petite touche de peinture bleu sur les manches génial. ❤
Thanks Magdad, loving the patina-ooze ! The pliers came out great - better than new ! There seem to have been a number firms out there using the Champion name over the years, thanks for the history, always interesting !
I love that type of needle nose, I have a similar pair I use everyday. you did a super job as usual and always nice to see Chuck. I have a pair of Klein wire cutters that have been spitting out gunk at the pivot point for sever years now.
I learned the hidden ooze trick from Scoutcrafter and it never fails to satisfy my soul. It's like the SWAT team lobbing in tear gas...you're not going to hide from me, ooze!
Well done, Sir! Better than when they rolled off the production line. I appreciate you sharing your techniques/tools, etc., as I am slowly improving my restoration kit. I haven’t attempted to get anything to this level of quality yet…but hopefully one day!
Great restoration and attention to detail. I will hazard a guess that those pliers are relatively low mileage because their jaws are in good condition and appear to align properly. I see numerous pairs where the jaws don't align properly due to over twisting, misuse/abuse. I like the term "patina ooze." Great new term to the tool restorers' lexicon.
Well done!! They polished up amazingly and the blue inlay was an excellent touch. I noticed mostly the tip had serrations for grip. Ive had old pliers like that and never understood why so much of a smooth jaw. Non marring bending maybe?
They turned out beautiful Magdad. I have a larger pair of needle nose pliers with the exact embellishment on the handles. I use them a lot but this video makes me want to clean them up. Nicely done
Can’t believe I’m the first comment ! They cleaned up real nice. I probably would’ve stopped after the wire wheel and evaporated-rust/WD-40 treatment. But I guess that’s why you are the pro.
Another great job. I have a pair of needle nose I found on the side of the road. They are in fairly good shape except for two deep pits I’m going to try to weld them. Too deep to grind out
You do great work with a modest number of tools directed to the home shop. Most often jaws on TH-cam plier restorations have good tip griping patterns. What do you use to restore the tip groves and cutters edges if worn or damaged?
Good job! Sounds bad but I always refer to getting the rust out as making it "bleed". The blue is a nice touch. How well do they cut? A couple of years ago I picked up a 1 1/4 lb. Champion DeArment ball peen hammer that was NOS. It didn't dawn on me until I got home that was Channellock. The "Meadville Penna." on the sticker was what made me buy it. I did go back and bought the rest of them. George
It looked great at the start, and I was really excited to see how it turned out, which was beautiful. How many passes did it take to get all the "patina juice" out of it?
Very nice job on the details for those pliers. I liked the blue accent in the handle grips. Your camera work is outstanding! How do you stop the rust which results in ooze?
Well done. Just proves the saying that decent tools last a lifetime. I'm from the UK and I am glad that some proper American tool companies are still going. All this cheap Chinese garbage is not the way for the future and makes me very sad.
@@357magdad Awesome! I am sad to be British now, having seen my once reasonable country go to crap in the last 50 years. We gave up all the manufacturing other countries once valued and now just seem to be the loser pit of the world. Now I am old I wish I had emigrated to America when I was 20. Your country seems to still value doing things properly which is really great. Thanks for doing your videos, it is fun to watch the restorations.
Don’t think they looked that good when they were new! I know what you mean about getting that rust to run out of the plier joint! I went through all of my jointed tools one day and juice was running by the pint! Good video!
Awesome job on the Channelocks needllenose pliers Magdad! They look terrific! Love the blue you added to the handle detail. 😊
Thanks! I thought the handle embellishments could use some color.
The blue colouration on embelished handles came out great
Thanks!
I really love the old tools. I guess it brings back memories of better times.
Hunting for, cleaning up and learning about old tools is a great hobby!
Great job and a very handy tool Thanks for sharing your time and skill 🍺🍺👍👍
Thanks Brian!
That was just amazing. The blue embellishment on the handles really made it! Great job! 👍
Thanks Frank! Light blue and polished steel always look sharp together!
The pliers cleaned up very well. Looking terrific, so much better than new. Nice touch to add the blue paint in the handle detail.
Well done.
Dave.
Thanks Dave!
I know it brings a lot of satisfaction to restore a tool a work of art! What you do is definitely always an art format! Keep up your work.
Thanks Steve! It was fun making it shiny again!
MagDad your attention to detail is inspirational. Those pliers are beautiful! Best, Bill.
Thanks Bill!
Great job. I like the old handle patterns before plastic became the norm.
Thanks! I do too!
Beautiful restoration on the needle nose pliers The pliers looked better now than they were brand new .. It's great to see made in America tools being restored .. Great Sunday morning video Mr Magdad and Mr Chuck Take care looking out for next Sunday's video
Thanks Roger! Next week's video is gonna be a good one!
Nice to see another piece of American steel craftsmanship preserved for the future. I don't care how nicely any of the imported tools are made. There's just something about holding a piece of American quality in your hand!
Channellock is one of the few surviving American tool manufacturers.
Fine Specimen there Bud!! Well deserving of a Magdad Makeover!!☻
Thanks RoadKing!
You did those pliers up beautifully. I love the blue highlights.
Thanks ShedMan!
Fantastic restoration. I like the embellishments on the handles. It's always a pleasure to watch your channel. Thanks Magdad
Thanks Michael! I've got a special episode planned for nest week - stay tuned!
Those look awesome! Brand new off the shelf and I love the blue you added to the handles.
Thanks! I tried to match the Channellock blue color of the modern pliers.
Great job Magdad! Love the Channellock blue in the handle embellishments. Take care 😃👍🏼
Thanks David!
Really liked the collaboration between you and Chuck on this restoration. The blue on the handles was pretty nice. Thanks, Chris
Thanks Chris! Chuck is a great shop buddy!
I have the exact same Channelock needle nose pliers, but I refurbished mine by hand. My pliers are not as pretty as your pliers but I sure like the handle embellishments.
The dig the handle embellishments Larry!
Always love to clean up a pair of needle nose pliers. Great job.
It was a fun project!
Great restoration! I do love the patina ooze.
Thanks Robert! Me too!
Yep the blue is a nice touch. They look great. I really like the handles.
Thanks Dale!
Great job. Love the paint in the handle embellishments. That was a great idea. Beautiful turn out.
Thanks!
Hi Magdad , Those Pliers Came Out Great! Love Channellocks.
Thanks! Me too Wayne!
No you aren't the only one that finds that satisfying. I just freed up a piston in a dirtbike for my niece and I used my evacuator to suck out a lot of that kind of ooze. Compression is up to 225psi due to the oil but cylinder looks great. Got fire, fuel is next. Nice job, anyone would be proud to have those now!
Sound like your niece will be motoring around in no time!
@@357magdad
With her grandgirls! They all have motorcycles.
You are not the only one! 👍😎😀
The "liquid patina ooze" club!
Always fun to see Chuck Flitz'n on a project, blue accents were a success in my book.
Thanks! Chuck liked the blue accents too!
Nicely done, the blue was awesome.
Thanks Terry!
It's great that you saved the markings and added the light blue to the embellishments on the handles
Luckily the markings were nice and deep Larry!
I dig the blue! 🤠👍 they came out awesome!
Thanks Vic! I tried to match the Channellock blue on the modern pliers.
Scout Crafter's 50/50 is really good for the 'patina ooze', it lasts longer than the WD40. Beautiful work, Magdad!
I like WD-40 because it doesn't react with paint or plastic.
I also get enjoyment seeing the "patina" ooze out. That is the sign of success! Nice job as usual Magdad. They look wonderful. By the way, I've copied your shrink-wrapped wire brush concept. It works great! Thanks!
Thanks Joseph! I'm glad the heat shrink wire brush trick works for you!
Hey !Bonjour Magdad vraiment une très belle restauration de cette pince à aiguille, elle est vraiment superbe, brillante à souhait et la petite touche de peinture bleu sur les manches génial. ❤
Thanks! Making old tools shiny again is fun!
What a Beauty! That looks like a museum piece!
Thanks! I'm glad you like how it turned out!
Another fantastic job, Magdad! I would be afraid to use them because they are too nice.
Thanks John! The nice thing about polished steel is that it is easy to maintain.
Thanks Magdad, loving the patina-ooze ! The pliers came out great - better than new !
There seem to have been a number firms out there using the Champion name over the years, thanks for the history, always interesting !
Thanks Andy! I guess Champion was a popular as Acme.
Great transformation of the tool. I never realized that ChannelLock was located in PA. Cool back story. Tnx!
Thanks! Meadville is south of Erie PA, close to the Ohio border.
Nice work MagDad! That was a really thorough cleanup and I love the handle embellishments--and the light blue was a nice touch.
Thanks! I tried to match the blue found on the modern Channellocks.
I love that type of needle nose, I have a similar pair I use everyday. you did a super job as usual and always nice to see Chuck. I have a pair of Klein wire cutters that have been spitting out gunk at the pivot point for sever years now.
Thanks! It is very satisfying freeing up a stuck pair of pliers and seeing that patina ooze leak out!
That turned out wonderfully. Your attention to detail is admirable. Thanks so much for sharing and hope you have a great day.
Thanks! Making old tools shiny again is fun!
Awesome job! Those are fantastic pliers. 😃👍
Thanks ScoutCrafter! I prefer ones that include cutters.
Excellent work on a beautiful piece 💪🏼
Thanks Rich!
I learned the hidden ooze trick from Scoutcrafter and it never fails to satisfy my soul. It's like the SWAT team lobbing in tear gas...you're not going to hide from me, ooze!
Another beauty, BTW.
Maybe I should make a liquid patina ooze ASMR style video...
Well done, Sir! Better than when they rolled off the production line. I appreciate you sharing your techniques/tools, etc., as I am slowly improving my restoration kit. I haven’t attempted to get anything to this level of quality yet…but hopefully one day!
Thanks! Cleaning up old tools is fun! You can get a lot done with just a rotary tool, but a 1x30 machine comes in handy.
TOP NOTCH ... Mr. Bagdad ! ! !
...Newk from Kentucky
Thanks Newk!
The pliers look great Magdad! The light blue in the handle embellishments adds a nice touch of color to them. Thanks for sharing this.
Thanks John!
A simple yet beautiful tool. Fine work once again, sir!
Thanks James!
Awesome looking i like blue in the handles They came out perfect THANK YOU FOR THE VIDEO
Thanks Joe!
Great restoration and attention to detail. I will hazard a guess that those pliers are relatively low mileage because their jaws are in good condition and appear to align properly. I see numerous pairs where the jaws don't align properly due to over twisting, misuse/abuse. I like the term "patina ooze." Great new term to the tool restorers' lexicon.
Thanks Pat! They do seem like they saw little use/abuse.
Well done!! They polished up amazingly and the blue inlay was an excellent touch. I noticed mostly the tip had serrations for grip. Ive had old pliers like that and never understood why so much of a smooth jaw. Non marring bending maybe?
Thanks! I think you're right!
Nice, I just found a pair of Williams pliers and cleaned them up. They look almost like yours except the embellishments.
Williams made quality tools!
It would be great to see how a worn centre pin leading to wobbly jaws could be fixed.
ScoutCrafter has shown us how to fix that a bunch of times:
th-cam.com/video/2RQnHMR247M/w-d-xo.html
They turned out beautiful Magdad. I have a larger pair of needle nose pliers with the exact embellishment on the handles. I use them a lot but this video makes me want to clean them up. Nicely done
Give them some love Ivan!
Can’t believe I’m the first comment ! They cleaned up real nice. I probably would’ve stopped after the wire wheel and evaporated-rust/WD-40 treatment. But I guess that’s why you are the pro.
Thanks Jimmy! It was fun making the pliers shiny again!
@@357magdadthink you call then needle nose Not channel lock
@@timmynormand8082 The Channellock catalog called them long nose, but I've always called this style needle nose.
@@357magdad that what I allways heard them called needle nose pliers. Do do amazing work bro
Beautiful! I got to tour the factory last year
That's cool! Thanks Jeff!
Another great job. I have a pair of needle nose I found on the side of the road. They are in fairly good shape except for two deep pits I’m going to try to weld them. Too deep to grind out
Thanks! I'd love to see some before and after photos of your pliers!
357mdad@gmail.com
Great job, looks wonderful.
Thanks Fred!
Amazing work, really looks great.
Thanks!
I enjoy the patina ooze too.
It is fun to watch it leak out of the pivot!
You do great work with a modest number of tools directed to the home shop. Most often jaws on TH-cam plier restorations have good tip griping patterns. What do you use to restore the tip groves and cutters edges if worn or damaged?
Thanks for watching! I've had success with diamond needle files.
Outstanding results! did you follow the WD40 with a drop of oil to the hinge joint?
Thanks! I didn't add any oil - but it probably wouldn't hurt.
I really enjoyed this video, especially the history about this brand. ;-))
Thanks! Learning about the history is a fun part of the hobby!
Thanks for the links.
You're welcome Kim!
Very nice restoration
Thanks John!
Very well done!
Thanks Tom! It's good to hear from you - it's been a while!
Good job! Sounds bad but I always refer to getting the rust out as making it "bleed". The blue is a nice touch. How well do they cut? A couple of years ago I picked up a 1 1/4 lb. Champion DeArment ball peen hammer that was NOS. It didn't dawn on me until I got home that was Channellock. The "Meadville Penna." on the sticker was what made me buy it. I did go back and bought the rest of them.
George
Thanks George! This pair does not have a cutter.
@@357magdad My bad...I wasn't paying full attention.
Well done!
How are you grounding your 1 x 30 sander to not get static shock? Mine zaps me good when sanding or polishing metal!
Thanks Scott! I've got a video about how I solved the problem you're having:
th-cam.com/video/BhnCBtXmZSY/w-d-xo.html
Awesome Magdad. As always! I want to get a set of conditioning belts. I know it’s subjective, but how long do they last with normal use? Thanks!
Thanks Stan! I'm still using my first set I got over 3 years ago.
Here's a link to my review:
th-cam.com/video/-txSVOHgptA/w-d-xo.html
It looked great at the start, and I was really excited to see how it turned out, which was beautiful. How many passes did it take to get all the "patina juice" out of it?
Thanks Chris! It's gonna leak a little patina ooze for a while.
Awesome job Magdad!!! I liked how you incorporated the blue. Did you use mica ? Thank You for sharing!
Thanks Jack! I used Testor's Sky Blue enamel.
Very nice job on the details for those pliers. I liked the blue accent in the handle grips. Your camera work is outstanding!
How do you stop the rust which results in ooze?
I'm glad you enjoyed the video! Keeping the pivot oiled will keep the joint from rusting.
Excellent!
Thanks Gary!
Hey Magdad, is your bench grinder removable for swap out with other tools? If so, method you use?
I bolted it to a section of 2x6. I put a foam pad down and C-clamp it to my workbench.
Nice job...🖖
Thank you!
Very nice!
Thank you!
Top notch result
Thank you!
Nice video.
Thank you!
Nice!
Thanks!
Well done. Just proves the saying that decent tools last a lifetime. I'm from the UK and I am glad that some proper American tool companies are still going. All this cheap Chinese garbage is not the way for the future and makes me very sad.
Thanks Mike! This Sunday's episode will feature another classic American manufacturer - stay tuned!
@@357magdad Awesome! I am sad to be British now, having seen my once reasonable country go to crap in the last 50 years. We gave up all the manufacturing other countries once valued and now just seem to be the loser pit of the world. Now I am old I wish I had emigrated to America when I was 20. Your country seems to still value doing things properly which is really great. Thanks for doing your videos, it is fun to watch the restorations.
Don’t think they looked that good when they were new! I know what you mean about getting that rust to run out of the plier joint! I went through all of my jointed tools one day and juice was running by the pint! Good video!
Thanks John! I've got a liquid patina ooze fetish!
Thought these tools were black finished when new. They look nice but it isnt a restoration its a bling job.
Thanks for watching Geoffrey! The 1967 Channellock catalog lists the finish as "polished steel".
I can’t afford all that name brand WD-40. I have to make do with WD-39.5
ScoutCrafter's 50/50 acetone and ATF is very popular and inexpensive...
Patina ooze! You need to copy right that saying!
"Patina Ooze" sounds like the title of a low budget horror movie!
Lets restore yet another pair of pliers. Yawn.
TH-cam is a big place, I bet you can find content that you find more exciting.
The "Patina Ooze" should have its own ASMR youtube channel hahaha
I should make a liquid patina ooze ASMR style video someday...
Very nice!
Thank you!